| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for K2G Industrial Communication Engine EVM |
| * |
| * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| /dts-v1/; |
| |
| #include "keystone-k2g.dtsi" |
| #include <dt-bindings/net/ti-dp83867.h> |
| |
| / { |
| compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone"; |
| model = "Texas Instruments K2G Industrial Communication EVM"; |
| |
| chosen { |
| stdout-path = &uart0; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0x20000000>; |
| }; |
| }; |
| |
| &mmc1 { |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| }; |
| |
| &qspi { |
| status = "okay"; |
| |
| flash0: flash@0 { |
| compatible = "s25fl256s1", "jedec,spi-nor"; |
| reg = <0>; |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <4>; |
| spi-max-frequency = <96000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cdns,read-delay = <5>; |
| cdns,tshsl-ns = <500>; |
| cdns,tsd2d-ns = <500>; |
| cdns,tchsh-ns = <119>; |
| cdns,tslch-ns = <119>; |
| |
| partition@0 { |
| label = "QSPI.u-boot"; |
| reg = <0x00000000 0x00100000>; |
| }; |
| partition@1 { |
| label = "QSPI.u-boot-env"; |
| reg = <0x00100000 0x00040000>; |
| }; |
| partition@2 { |
| label = "QSPI.skern"; |
| reg = <0x00140000 0x0040000>; |
| }; |
| partition@3 { |
| label = "QSPI.pmmc-firmware"; |
| reg = <0x00180000 0x0040000>; |
| }; |
| partition@4 { |
| label = "QSPI.kernel"; |
| reg = <0x001c0000 0x0800000>; |
| }; |
| partition@5 { |
| label = "QSPI.u-boot-spl-os"; |
| reg = <0x009c0000 0x0040000>; |
| }; |
| partition@6 { |
| label = "QSPI.file-system"; |
| reg = <0x00a00000 0x1600000>; |
| }; |
| }; |
| }; |
| |
| &qmss { |
| status = "okay"; |
| }; |
| |
| &knav_dmas { |
| status = "okay"; |
| }; |
| |
| &netcp { |
| pinctrl-names = "default"; |
| //pinctrl-0 = <&emac_pins>; |
| status = "okay"; |
| }; |
| |
| &mdio { |
| pinctrl-names = "default"; |
| //pinctrl-0 = <&mdio_pins>; |
| status = "okay"; |
| ethphy0: ethernet-phy@0 { |
| reg = <0>; |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; |
| ti,min-output-impedance; |
| ti,dp83867-rxctrl-strap-quirk; |
| }; |
| }; |
| |
| &gbe0 { |
| phy-handle = <ðphy0>; |
| phy-mode = "rgmii-id"; |
| status = "okay"; |
| }; |