blob: 75a29e65e10f50fd2a60c61289d7c437b7f89f45 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014-2019 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
#include "dra74x.dtsi"
#include "dra74x-mmc-iodelay.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/dra.h>
/ {
model = "BeagleBoard.org BeagleBone AI";
compatible = "beagle,am5729-beagleboneai", "ti,am5728",
"ti,dra742", "ti,dra74", "ti,dra7";
aliases {
rtc0 = &tps659038_rtc;
rtc1 = &rtc;
display0 = &hdmi_conn;
};
chosen {
stdout-path = &uart1;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>;
};
vdd_adc: gpioregulator-vdd_adc {
compatible = "regulator-gpio";
regulator-name = "vdd_adc";
vin-supply = <&vdd_5v>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
states = <1800000 0
3300000 1>;
};
vdd_5v: fixedregulator-vdd_5v {
compatible = "regulator-fixed";
regulator-name = "vdd_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vtt_fixed: fixedregulator-vtt {
/* TPS51200 */
compatible = "regulator-fixed";
regulator-name = "vtt_fixed";
vin-supply = <&vdd_ddr>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
leds {
compatible = "gpio-leds";
led0 {
label = "beaglebone:green:usr0";
gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led1 {
label = "beaglebone:green:usr1";
gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led2 {
label = "beaglebone:green:usr2";
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu";
default-state = "off";
};
led3 {
label = "beaglebone:green:usr3";
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
default-state = "off";
};
led4 {
label = "beaglebone:green:usr4";
gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "netdev";
default-state = "off";
};
};
hdmi_conn: connector@0 {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_encoder_out>;
};
};
};
hdmi_enc: encoder@0 {
/* "ti,tpd12s016" software compatible with "ti,tpd12s015"
* no need for individual driver
*/
compatible = "ti,tpd12s015";
gpios = <0>,
<0>,
<&gpio7 12 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <0x1>;
#size-cells = <0x0>;
port@0 {
reg = <0x0>;
hdmi_encoder_in: endpoint@0 {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <0x1>;
hdmi_encoder_out: endpoint@0 {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
emmc_pwrseq: emmc_pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
};
brcmf_pwrseq: brcmf_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>, /* BT-REG-ON */
<&gpio3 18 GPIO_ACTIVE_LOW>; /* WL-REG-ON */
};
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
ti,enable-id-detection;
id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
tps659038: tps659038@58 {
compatible = "ti,tps659038";
reg = <0x58>;
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
ti,palmas-override-powerhold;
tps659038_pmic {
compatible = "ti,tps659038-pmic";
smps12-in-supply = <&vdd_5v>;
smps3-in-supply = <&vdd_5v>;
smps45-in-supply = <&vdd_5v>;
smps6-in-supply = <&vdd_5v>;
smps7-in-supply = <&vdd_5v>;
mps3-in-supply = <&vdd_5v>;
smps8-in-supply = <&vdd_5v>;
smps9-in-supply = <&vdd_5v>;
ldo1-in-supply = <&vdd_5v>;
ldo2-in-supply = <&vdd_5v>;
ldo3-in-supply = <&vdd_5v>;
ldo4-in-supply = <&vdd_5v>;
ldo9-in-supply = <&vdd_5v>;
ldoln-in-supply = <&vdd_5v>;
ldousb-in-supply = <&vdd_5v>;
ldortc-in-supply = <&vdd_5v>;
regulators {
vdd_mpu: smps12 {
/* VDD_MPU */
regulator-name = "smps12";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
vdd_ddr: smps3 {
/* VDD_DDR EMIF1 EMIF2 */
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
vdd_dspeve: smps45 {
/* VDD_DSPEVE on AM572 */
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
vdd_gpu: smps6 {
/* VDD_GPU */
regulator-name = "smps6";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
vdd_core: smps7 {
/* VDD_CORE */
regulator-name = "smps7";
regulator-min-microvolt = < 850000>; /*** 1.15V */
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
vdd_iva: smps8 {
/* VDD_IVAHD */ /*** 1.06V */
regulator-name = "smps8";
};
vdd_3v3: smps9 {
/* VDD_3V3 */
regulator-name = "smps9";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
vdd_sd: ldo1 {
/* VDDSHV8 - VSDMMC */
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vdd_1v8: ldo2 {
/* VDDSH18V */
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8_phy_ldo3: ldo3 {
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8_phy_ldo4: ldo4 {
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
/* LDO5-8 unused */
vdd_rtc: ldo9 {
/* VDD_RTC */
regulator-name = "ldo9";
regulator-min-microvolt = < 840000>;
regulator-max-microvolt = <1160000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8_pll: ldoln {
/* VDDA_1V8_PLL */
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldortc_reg: ldortc {
/* VDDA_RTC */
regulator-name = "ldortc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
regen1: regen1 {
/* VDD_3V3_ON */
regulator-name = "regen1";
regulator-boot-on;
regulator-always-on;
};
regen2: regen2 {
/* Needed for PMIC internal resource */
regulator-name = "regen2";
regulator-boot-on;
regulator-always-on;
};
};
};
tps659038_rtc: tps659038_rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&tps659038>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
};
tps659038_pwr_button: tps659038_pwr_button {
compatible = "ti,palmas-pwrbutton";
interrupt-parent = <&tps659038>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
ti,palmas-long-press-seconds = <12>;
};
tps659038_gpio: tps659038_gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
};
};
&mcspi3 {
status = "okay";
ti,pindir-d0-out-d1-in;
sn65hvs882: sn65hvs882@0 {
compatible = "pisosr-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
spi-max-frequency = <1000000>;
spi-cpol;
};
};
&cpu0 {
vdd-supply = <&vdd_mpu>;
voltage-tolerance = <1>;
};
&uart1 {
status = "okay";
};
&davinci_mdio {
reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
reset-delay-us = <2>;
phy0: ethernet-phy@1 {
reg = <4>;
eee-broken-100tx;
eee-broken-1000t;
};
};
&mac {
slaves = <1>;
status = "okay";
};
&cpsw_emac0 {
phy-handle = <&phy0>;
phy-mode = "rgmii";
};
&mmc1 {
status = "okay";
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&vdd_sd>;
bus-width = <4>;
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_default>;
};
&mmc2 {
status = "okay";
vmmc-supply = <&vdd_1v8>;
vqmmc-supply = <&vdd_1v8>;
bus-width = <8>;
ti,non-removable;
non-removable;
mmc-pwrseq = <&emmc_pwrseq>;
ti,needs-special-reset;
dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
dma-names = "tx", "rx";
pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
pinctrl-3 = <&mmc2_pins_hs200>;
};
&mmc4 {
/* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
/* HS: High speed up to 50 MHz (3.3 V signaling). */
/* SDR12: SDR up to 25 MHz (1.8 V signaling). */
/* SDR25: SDR up to 50 MHz (1.8 V signaling). */
/* SDR50: SDR up to 100 MHz (1.8 V signaling). */
/* SDR104: SDR up to 208 MHz (1.8 V signaling) */
/* DDR50: DDR up to 50 MHz (1.8 V signaling). */
status = "okay";
ti,needs-special-reset;
vmmc-supply = <&vdd_3v3>;
cap-power-off-card;
keep-power-in-suspend;
bus-width = <4>;
ti,non-removable;
non-removable;
no-1-8-v;
max-frequency = <24000000>;
#address-cells = <1>;
#size-cells = <0>;
mmc-pwrseq = <&brcmf_pwrseq>;
brcmf: wifi@1 {
status = "okay";
reg = <1>;
compatible = "brcm,bcm4329-fmac";
brcm,sd-head-align = <4>;
brcm,sd_head_align = <4>;
brcm,sd_sgentry_align = <512>;
interrupt-parent = <&gpio3>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "host-wake";
};
};
&usb2_phy1 {
phy-supply = <&ldousb_reg>;
};
&usb2_phy2 {
phy-supply = <&ldousb_reg>;
};
&usb1 {
status = "okay";
dr_mode = "otg";
};
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&usb2 {
status = "okay";
dr_mode = "host";
};
&dss {
status = "okay";
vdda_video-supply = <&vdd_1v8_pll>;
};
&hdmi {
status = "okay";
vdda-supply = <&vdd_1v8_phy_ldo4>;
port {
hdmi_out: endpoint {
remote-endpoint = <&hdmi_encoder_in>;
};
};
};
&bandgap {
status = "okay";
};
&cpu_alert0 {
temperature = <55000>; /* milliCelsius */
};
&cpu_crit {
temperature = <85000>; /* milliCelsius */
};
&gpu_crit {
temperature = <85000>; /* milliCelsius */
};
&core_crit {
temperature = <85000>; /* milliCelsius */
};
&dspeve_crit {
temperature = <85000>; /* milliCelsius */
};
&iva_crit {
temperature = <85000>; /* milliCelsius */
};
&sata {
status = "disabled";
};
&sata_phy {
status = "disabled";
};
/* bluetooth */
&uart6 {
status = "okay";
};
/* cape header stuff */
&i2c4 {
status = "okay";
clock-frequency = <100000>;
};
#include "omap5-u-boot.dtsi"