| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * Copyright (c) 2022, Linaro Limited |
| */ |
| |
| #if !defined _FWU_H_ |
| #define _FWU_H_ |
| |
| #include <blk.h> |
| #include <efi.h> |
| #include <mtd.h> |
| #include <uuid.h> |
| |
| #include <linux/types.h> |
| |
| struct fwu_mdata; |
| struct udevice; |
| |
| struct fwu_mdata_gpt_blk_priv { |
| struct udevice *blk_dev; |
| }; |
| |
| struct fwu_mtd_image_info { |
| u32 start, size; |
| int bank_num, image_num; |
| char uuidbuf[UUID_STR_LEN + 1]; |
| }; |
| |
| struct fwu_mdata_ops { |
| /** |
| * read_mdata() - Populate the asked FWU metadata copy |
| * @dev: FWU metadata device |
| * @mdata: Output FWU mdata read |
| * @primary: If primary or secondary copy of metadata is to be read |
| * |
| * Return: 0 if OK, -ve on error |
| */ |
| int (*read_mdata)(struct udevice *dev, struct fwu_mdata *mdata, bool primary); |
| |
| /** |
| * write_mdata() - Write the given FWU metadata copy |
| * @dev: FWU metadata device |
| * @mdata: Copy of the FWU metadata to write |
| * @primary: If primary or secondary copy of metadata is to be written |
| * |
| * Return: 0 if OK, -ve on error |
| */ |
| int (*write_mdata)(struct udevice *dev, struct fwu_mdata *mdata, bool primary); |
| }; |
| |
| #define FWU_MDATA_VERSION 0x1 |
| #define FWU_IMAGE_ACCEPTED 0x1 |
| |
| /* |
| * GUID value defined in the FWU specification for identification |
| * of the FWU metadata partition. |
| */ |
| #define FWU_MDATA_GUID \ |
| EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \ |
| 0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23) |
| |
| /* |
| * GUID value defined in the Dependable Boot specification for |
| * identification of the revert capsule, used for reverting |
| * any image in the updated bank. |
| */ |
| #define FWU_OS_REQUEST_FW_REVERT_GUID \ |
| EFI_GUID(0xacd58b4b, 0xc0e8, 0x475f, 0x99, 0xb5, \ |
| 0x6b, 0x3f, 0x7e, 0x07, 0xaa, 0xf0) |
| |
| /* |
| * GUID value defined in the Dependable Boot specification for |
| * identification of the accept capsule, used for accepting |
| * an image in the updated bank. |
| */ |
| #define FWU_OS_REQUEST_FW_ACCEPT_GUID \ |
| EFI_GUID(0x0c996046, 0xbcc0, 0x4d04, 0x85, 0xec, \ |
| 0xe1, 0xfc, 0xed, 0xf1, 0xc6, 0xf8) |
| |
| /** |
| * fwu_read_mdata() - Wrapper around fwu_mdata_ops.read_mdata() |
| */ |
| int fwu_read_mdata(struct udevice *dev, struct fwu_mdata *mdata, bool primary); |
| |
| /** |
| * fwu_write_mdata() - Wrapper around fwu_mdata_ops.write_mdata() |
| */ |
| int fwu_write_mdata(struct udevice *dev, struct fwu_mdata *mdata, bool primary); |
| |
| /** |
| * fwu_get_mdata() - Read, verify and return the FWU metadata |
| * |
| * Read both the metadata copies from the storage media, verify their checksum, |
| * and ascertain that both copies match. If one of the copies has gone bad, |
| * restore it from the good copy. |
| * |
| * Return: 0 if OK, -ve on error |
| */ |
| int fwu_get_mdata(struct fwu_mdata *mdata); |
| |
| /** |
| * fwu_get_active_index() - Get active_index from the FWU metadata |
| * @active_idxp: active_index value to be read |
| * |
| * Read the active_index field from the FWU metadata and place it in |
| * the variable pointed to be the function argument. |
| * |
| * Return: 0 if OK, -ve on error |
| * |
| */ |
| int fwu_get_active_index(uint *active_idxp); |
| |
| /** |
| * fwu_set_active_index() - Set active_index in the FWU metadata |
| * @active_idx: active_index value to be set |
| * |
| * Update the active_index field in the FWU metadata |
| * |
| * Return: 0 if OK, -ve on error |
| * |
| */ |
| int fwu_set_active_index(uint active_idx); |
| |
| /** |
| * fwu_get_dfu_alt_num() - Get the dfu_alt_num to be used for capsule update |
| * @image_index: The Image Index for the image |
| * @alt_num: pointer to store dfu_alt_num |
| * |
| * Currently, the capsule update driver uses the DFU framework for |
| * the updates. This function gets the DFU alt number which is to |
| * be used for capsule update. |
| * |
| * Return: 0 if OK, -ve on error |
| * |
| */ |
| int fwu_get_dfu_alt_num(u8 image_index, u8 *alt_num); |
| |
| /** |
| * fwu_revert_boot_index() - Revert the active index in the FWU metadata |
| * |
| * Revert the active_index value in the FWU metadata, by swapping the values |
| * of active_index and previous_active_index in both copies of the |
| * FWU metadata. |
| * |
| * Return: 0 if OK, -ve on error |
| * |
| */ |
| int fwu_revert_boot_index(void); |
| |
| /** |
| * fwu_accept_image() - Set the Acceptance bit for the image |
| * @img_type_id: GUID of the image type for which the accepted bit is to be |
| * cleared |
| * @bank: Bank of which the image's Accept bit is to be set |
| * |
| * Set the accepted bit for the image specified by the img_guid parameter. This |
| * indicates acceptance of image for subsequent boots by some governing component |
| * like OS(or firmware). |
| * |
| * Return: 0 if OK, -ve on error |
| * |
| */ |
| int fwu_accept_image(efi_guid_t *img_type_id, u32 bank); |
| |
| /** |
| * fwu_clear_accept_image() - Clear the Acceptance bit for the image |
| * @img_type_id: GUID of the image type for which the accepted bit is to be |
| * cleared |
| * @bank: Bank of which the image's Accept bit is to be cleared |
| * |
| * Clear the accepted bit for the image type specified by the img_type_id parameter. |
| * This function is called after the image has been updated. The accepted bit is |
| * cleared to be set subsequently after passing the image acceptance criteria, by |
| * either the OS(or firmware) |
| * |
| * Return: 0 if OK, -ve on error |
| * |
| */ |
| int fwu_clear_accept_image(efi_guid_t *img_type_id, u32 bank); |
| |
| /** |
| * fwu_plat_get_alt_num() - Get the DFU Alt Num for the image from the platform |
| * @dev: FWU device |
| * @image_guid: Image GUID for which DFU alt number needs to be retrieved |
| * @alt_num: Pointer to the alt_num |
| * |
| * Get the DFU alt number from the platform for the image specified by the |
| * image GUID. |
| * |
| * Return: 0 if OK, -ve on error |
| * |
| */ |
| int fwu_plat_get_alt_num(struct udevice *dev, efi_guid_t *image_guid, |
| u8 *alt_num); |
| |
| /** |
| * fwu_plat_get_update_index() - Get the value of the update bank |
| * @update_idx: Bank number to which images are to be updated |
| * |
| * Get the value of the bank(partition) to which the update needs to be |
| * made. |
| * |
| * Note: This is a weak function and platforms can override this with |
| * their own implementation for selection of the update bank. |
| * |
| * Return: 0 if OK, -ve on error |
| * |
| */ |
| int fwu_plat_get_update_index(uint *update_idx); |
| |
| /** |
| * fwu_plat_get_bootidx() - Get the value of the boot index |
| * @boot_idx: Boot index value |
| * |
| * Get the value of the bank(partition) from which the platform |
| * has booted. This value is passed to U-Boot from the earlier |
| * stage bootloader which loads and boots all the relevant |
| * firmware images |
| * |
| */ |
| void fwu_plat_get_bootidx(uint *boot_idx); |
| |
| /** |
| * fwu_update_checks_pass() - Check if FWU update can be done |
| * |
| * Check if the FWU update can be executed. The updates are |
| * allowed only when the platform is not in Trial State and |
| * the boot time checks have passed |
| * |
| * Return: 1 if OK, 0 if checks do not pass |
| * |
| */ |
| u8 fwu_update_checks_pass(void); |
| |
| /** |
| * fwu_empty_capsule_checks_pass() - Check if empty capsule can be processed |
| * |
| * Check if the empty capsule can be processed to either accept or revert |
| * an earlier executed update. The empty capsules need to be processed |
| * only when the platform is in Trial State and the boot time checks have |
| * passed |
| * |
| * Return: 1 if OK, 0 if not to be allowed |
| * |
| */ |
| u8 fwu_empty_capsule_checks_pass(void); |
| |
| /** |
| * fwu_trial_state_ctr_start() - Start the Trial State counter |
| * |
| * Start the counter to identify the platform booting in the |
| * Trial State. The counter is implemented as an EFI variable. |
| * |
| * Return: 0 if OK, -ve on error |
| * |
| */ |
| int fwu_trial_state_ctr_start(void); |
| |
| /** |
| * fwu_gen_alt_info_from_mtd() - Parse dfu_alt_info from metadata in mtd |
| * @buf: Buffer into which the dfu_alt_info is filled |
| * @len: Maximum characters that can be written in buf |
| * @mtd: Pointer to underlying MTD device |
| * |
| * Parse dfu_alt_info from metadata in mtd. Used for setting the env. |
| * |
| * Return: 0 if OK, -ve on error |
| */ |
| int fwu_gen_alt_info_from_mtd(char *buf, size_t len, struct mtd_info *mtd); |
| |
| /** |
| * fwu_mtd_get_alt_num() - Mapping of fwu_plat_get_alt_num for MTD device |
| * @image_guid: Image GUID for which DFU alt number needs to be retrieved |
| * @alt_num: Pointer to the alt_num |
| * @mtd_dev: Name of mtd device instance |
| * |
| * To map fwu_plat_get_alt_num onto mtd based metadata implementation. |
| * |
| * Return: 0 if OK, -ve on error |
| */ |
| int fwu_mtd_get_alt_num(efi_guid_t *image_guid, u8 *alt_num, const char *mtd_dev); |
| |
| #endif /* _FWU_H_ */ |