include/configs/sunxi-common.h - u-boot - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
  *
  * (C) Copyright 2007-2011
  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
  * Tom Cubie <tangliang@allwinnertech.com>
  *
  * Configuration settings for the Allwinner sunxi series of boards.
  */

 #ifndef _SUNXI_COMMON_CONFIG_H
 #define _SUNXI_COMMON_CONFIG_H

 #include <linux/stringify.h>

 /****************************************************************************
  *                  base addresses for the SPL UART driver                  *
  ****************************************************************************/
 #ifdef CONFIG_MACH_SUNIV
 /* suniv doesn't have apb2 and uart is connected to apb1 */
 #define CFG_SYS_NS16550_CLK		100000000
 #else
 #define CFG_SYS_NS16550_CLK		24000000
 #endif
 #if !CONFIG_IS_ENABLED(DM_SERIAL)
 #include <asm/arch/serial.h>
 # define CFG_SYS_NS16550_COM1		SUNXI_UART0_BASE
 # define CFG_SYS_NS16550_COM2		SUNXI_UART1_BASE
 # define CFG_SYS_NS16550_COM3		SUNXI_UART2_BASE
 # define CFG_SYS_NS16550_COM4		SUNXI_UART3_BASE
 # define CFG_SYS_NS16550_COM5		SUNXI_R_UART_BASE
 #endif

 /****************************************************************************
  *                             DRAM base address                            *
  ****************************************************************************/
 /*
  * The DRAM Base differs between some models. We cannot use macros for the
  * CONFIG_FOO defines which contain the DRAM base address since they end
  * up unexpanded in include/autoconf.mk .
  *
  * So we have to have this #ifdef #else #endif block for these.
  */
 #ifdef CONFIG_MACH_SUN9I
 #define SDRAM_OFFSET(x) 0x2##x
 #define CFG_SYS_SDRAM_BASE		0x20000000
 #elif defined(CONFIG_MACH_SUNIV)
 #define SDRAM_OFFSET(x) 0x8##x
 #define CFG_SYS_SDRAM_BASE		0x80000000
 #else
 #define SDRAM_OFFSET(x) 0x4##x
 #define CFG_SYS_SDRAM_BASE		0x40000000
 /* V3s do not have enough memory to place code at 0x4a000000 */
 #endif

 #define CFG_SYS_INIT_RAM_ADDR	CONFIG_SUNXI_SRAM_ADDRESS
 /* FIXME: this may be larger on some SoCs */
 #define CFG_SYS_INIT_RAM_SIZE	0x8000 /* 32 KiB */

 #define PHYS_SDRAM_0			CFG_SYS_SDRAM_BASE
 #define PHYS_SDRAM_0_SIZE		0x80000000 /* 2 GiB */

 /****************************************************************************
  *           environment variables holding default load addresses           *
  ****************************************************************************/
 /*
  * We cannot use expressions here, because expressions won't be evaluated in
  * autoconf.mk.
  */
 #ifdef CONFIG_ARM64
 /*
  * Boards seem to come with at least 512MB of DRAM.
  * The kernel should go at 512K, which is the default text offset (that will
  * be adjusted at runtime if needed).
  * There is no compression for arm64 kernels (yet), so leave some space
  * for really big kernels, say 256MB for now.
  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
  */
 #define BOOTM_SIZE        __stringify(0xa000000)
 #define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(0080000))
 #define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000))
 #define KERNEL_COMP_SIZE  __stringify(0xb000000)
 #define FDT_ADDR_R        __stringify(SDRAM_OFFSET(FA00000))
 #define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(FC00000))
 #define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(FD00000))
 #define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
 #define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(FF00000))

 #elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256)
 /*
  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
  * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
  */
 #define BOOTM_SIZE        __stringify(0xa000000)
 #define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(2000000))
 #define FDT_ADDR_R        __stringify(SDRAM_OFFSET(3000000))
 #define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(3100000))
 #define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(3200000))
 #define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 #define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(3400000))

 #elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64)
 /*
  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
  * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
  */
 #define BOOTM_SIZE        __stringify(0x2e00000)
 #define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(1000000))
 #define FDT_ADDR_R        __stringify(SDRAM_OFFSET(1800000))
 #define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(1900000))
 #define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(1A00000))
 #define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
 #define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(1C00000))

 #elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32)
 /*
  * 32M RAM minus 2.5MB for u-boot, heap, stack, etc.
  * 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script,
  * 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB)
  */
 #define BOOTM_SIZE        __stringify(0x1700000)
 #define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(1000000))
 #define FDT_ADDR_R        __stringify(SDRAM_OFFSET(1d50000))
 #define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(1d40000))
 #define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(1d00000))
 #define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1d20000))
 #define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(1800000))

 #else
 #error Need at least 32MB of DRAM. Please adjust load addresses.
 #endif

 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=" BOOTM_SIZE "\0" \
 	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
 	"fdt_addr_r=" FDT_ADDR_R "\0" \
 	"scriptaddr=" SCRIPT_ADDR_R "\0" \
 	"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 	"fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \
 	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"

 #ifdef CONFIG_ARM64
 #define MEM_LAYOUT_ENV_EXTRA_SETTINGS \
 	"kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \
 	"kernel_comp_size=" KERNEL_COMP_SIZE "\0"
 #else
 #define MEM_LAYOUT_ENV_EXTRA_SETTINGS ""
 #endif

 #define DFU_ALT_INFO_RAM \
 	"dfu_alt_info_ram=" \
 	"kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 	"fdt ram " FDT_ADDR_R " 0x100000;" \
 	"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"

 /****************************************************************************
  *                  definitions for the distro boot system                  *
  ****************************************************************************/
 #ifdef CONFIG_MMC
 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance)		\
 	BOOTENV_DEV_MMC(MMC, mmc, 0)					\
 	BOOTENV_DEV_MMC(MMC, mmc, 1)					\
 	"bootcmd_mmc_auto="						\
 		"if test ${mmc_bootdev} -eq 1; then "			\
 			"run bootcmd_mmc1; "				\
 			"run bootcmd_mmc0; "				\
 		"elif test ${mmc_bootdev} -eq 0; then "			\
 			"run bootcmd_mmc0; "				\
 			"run bootcmd_mmc1; "				\
 		"fi\0"

 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
 	"mmc_auto "

 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
 #else
 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 #endif
 #else
 #define BOOT_TARGET_DEVICES_MMC(func)
 #endif

 #ifdef CONFIG_AHCI
 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 #else
 #define BOOT_TARGET_DEVICES_SCSI(func)
 #endif

 #ifdef CONFIG_USB_STORAGE
 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 #else
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif

 #ifdef CONFIG_CMD_PXE
 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
 #else
 #define BOOT_TARGET_DEVICES_PXE(func)
 #endif

 #ifdef CONFIG_CMD_DHCP
 #define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
 #else
 #define BOOT_TARGET_DEVICES_DHCP(func)
 #endif

 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 	"bootcmd_fel=" \
 		"if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 			"echo '(FEL boot)'; " \
 			"source ${fel_scriptaddr}; " \
 		"fi\0"
 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 	"fel "

 #define BOOT_TARGET_DEVICES(func) \
 	func(FEL, fel, na) \
 	BOOT_TARGET_DEVICES_MMC(func) \
 	BOOT_TARGET_DEVICES_SCSI(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
 	BOOT_TARGET_DEVICES_PXE(func) \
 	BOOT_TARGET_DEVICES_DHCP(func)

 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 #define BOOTCMD_SUNXI_COMPAT \
 	"bootcmd_sunxi_compat=" \
 		"setenv root /dev/mmcblk0p3 rootwait; " \
 		"if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 			"echo Loaded environment from uEnv.txt; " \
 			"env import -t 0x44000000 ${filesize}; " \
 		"fi; " \
 		"setenv bootargs console=${console} root=${root} ${extraargs}; " \
 		"ext2load mmc 0 0x43000000 script.bin && " \
 		"ext2load mmc 0 0x48000000 uImage && " \
 		"bootm 0x48000000\0"
 #else
 #define BOOTCMD_SUNXI_COMPAT
 #endif

 #include <config_distro_bootcmd.h>

 #ifdef CONFIG_USB_KEYBOARD
 #define CONSOLE_STDIN_SETTINGS \
 	"stdin=serial,usbkbd\0"
 #else
 #define CONSOLE_STDIN_SETTINGS \
 	"stdin=serial\0"
 #endif

 #ifdef CONFIG_VIDEO
 #define CONSOLE_STDOUT_SETTINGS \
 	"stdout=serial,vidconsole\0" \
 	"stderr=serial,vidconsole\0"
 #else
 #define CONSOLE_STDOUT_SETTINGS \
 	"stdout=serial\0" \
 	"stderr=serial\0"
 #endif

 #define PARTS_DEFAULT \
 	"name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
 	"name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
 	"name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
 	"name=system,size=-,uuid=${uuid_gpt_system};"

 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"

 #ifdef CONFIG_ARM64
 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
 #else
 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
 #endif

 #define CONSOLE_ENV_SETTINGS \
 	CONSOLE_STDIN_SETTINGS \
 	CONSOLE_STDOUT_SETTINGS

 #ifdef CONFIG_ARM64
 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 #else
 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 #endif

 #define CFG_EXTRA_ENV_SETTINGS \
 	CONSOLE_ENV_SETTINGS \
 	MEM_LAYOUT_ENV_SETTINGS \
 	MEM_LAYOUT_ENV_EXTRA_SETTINGS \
 	DFU_ALT_INFO_RAM \
 	"fdtfile=" FDTFILE "\0" \
 	"console=ttyS0,115200\0" \
 	"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
 	"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
 	"partitions=" PARTS_DEFAULT "\0" \
 	BOOTCMD_SUNXI_COMPAT \
 	BOOTENV

 #endif /* _SUNXI_COMMON_CONFIG_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
	*
	* (C) Copyright 2007-2011
	* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
	* Tom Cubie <tangliang@allwinnertech.com>
	*
	* Configuration settings for the Allwinner sunxi series of boards.
	*/

	#ifndef _SUNXI_COMMON_CONFIG_H
	#define _SUNXI_COMMON_CONFIG_H

	#include <linux/stringify.h>

	/****************************************************************************
	* base addresses for the SPL UART driver *
	****************************************************************************/
	#ifdef CONFIG_MACH_SUNIV
	/* suniv doesn't have apb2 and uart is connected to apb1 */
	#define CFG_SYS_NS16550_CLK 100000000
	#else
	#define CFG_SYS_NS16550_CLK 24000000
	#endif
	#if !CONFIG_IS_ENABLED(DM_SERIAL)
	#include <asm/arch/serial.h>
	# define CFG_SYS_NS16550_COM1 SUNXI_UART0_BASE
	# define CFG_SYS_NS16550_COM2 SUNXI_UART1_BASE
	# define CFG_SYS_NS16550_COM3 SUNXI_UART2_BASE
	# define CFG_SYS_NS16550_COM4 SUNXI_UART3_BASE
	# define CFG_SYS_NS16550_COM5 SUNXI_R_UART_BASE
	#endif

	/****************************************************************************
	* DRAM base address *
	****************************************************************************/
	/*
	* The DRAM Base differs between some models. We cannot use macros for the
	* CONFIG_FOO defines which contain the DRAM base address since they end
	* up unexpanded in include/autoconf.mk .
	*
	* So we have to have this #ifdef #else #endif block for these.
	*/
	#ifdef CONFIG_MACH_SUN9I
	#define SDRAM_OFFSET(x) 0x2##x
	#define CFG_SYS_SDRAM_BASE 0x20000000
	#elif defined(CONFIG_MACH_SUNIV)
	#define SDRAM_OFFSET(x) 0x8##x
	#define CFG_SYS_SDRAM_BASE 0x80000000
	#else
	#define SDRAM_OFFSET(x) 0x4##x
	#define CFG_SYS_SDRAM_BASE 0x40000000
	/* V3s do not have enough memory to place code at 0x4a000000 */
	#endif

	#define CFG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS
	/* FIXME: this may be larger on some SoCs */
	#define CFG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */

	#define PHYS_SDRAM_0 CFG_SYS_SDRAM_BASE
	#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */

	/****************************************************************************
	* environment variables holding default load addresses *
	****************************************************************************/
	/*
	* We cannot use expressions here, because expressions won't be evaluated in
	* autoconf.mk.
	*/
	#ifdef CONFIG_ARM64
	/*
	* Boards seem to come with at least 512MB of DRAM.
	* The kernel should go at 512K, which is the default text offset (that will
	* be adjusted at runtime if needed).
	* There is no compression for arm64 kernels (yet), so leave some space
	* for really big kernels, say 256MB for now.
	* Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
	*/
	#define BOOTM_SIZE __stringify(0xa000000)
	#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000))
	#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000))
	#define KERNEL_COMP_SIZE __stringify(0xb000000)
	#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))
	#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))
	#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))
	#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
	#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FF00000))

	#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256)
	/*
	* 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
	* 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
	* 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
	*/
	#define BOOTM_SIZE __stringify(0xa000000)
	#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
	#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
	#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
	#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
	#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
	#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000))

	#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64)
	/*
	* 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
	* 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
	* 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
	*/
	#define BOOTM_SIZE __stringify(0x2e00000)
	#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
	#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000))
	#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000))
	#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
	#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
	#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1C00000))

	#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32)
	/*
	* 32M RAM minus 2.5MB for u-boot, heap, stack, etc.
	* 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script,
	* 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB)
	*/
	#define BOOTM_SIZE __stringify(0x1700000)
	#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
	#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1d50000))
	#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1d40000))
	#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1d00000))
	#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1d20000))
	#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1800000))

	#else
	#error Need at least 32MB of DRAM. Please adjust load addresses.
	#endif

	#define MEM_LAYOUT_ENV_SETTINGS \
	"bootm_size=" BOOTM_SIZE "\0" \
	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
	"fdt_addr_r=" FDT_ADDR_R "\0" \
	"scriptaddr=" SCRIPT_ADDR_R "\0" \
	"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
	"fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \
	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"

	#ifdef CONFIG_ARM64
	#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \
	"kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \
	"kernel_comp_size=" KERNEL_COMP_SIZE "\0"
	#else
	#define MEM_LAYOUT_ENV_EXTRA_SETTINGS ""
	#endif

	#define DFU_ALT_INFO_RAM \
	"dfu_alt_info_ram=" \
	"kernel ram " KERNEL_ADDR_R " 0x1000000;" \
	"fdt ram " FDT_ADDR_R " 0x100000;" \
	"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"

	/****************************************************************************
	* definitions for the distro boot system *
	****************************************************************************/
	#ifdef CONFIG_MMC
	#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
	#define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \
	BOOTENV_DEV_MMC(MMC, mmc, 0) \
	BOOTENV_DEV_MMC(MMC, mmc, 1) \
	"bootcmd_mmc_auto=" \
	"if test ${mmc_bootdev} -eq 1; then " \
	"run bootcmd_mmc1; " \
	"run bootcmd_mmc0; " \
	"elif test ${mmc_bootdev} -eq 0; then " \
	"run bootcmd_mmc0; " \
	"run bootcmd_mmc1; " \
	"fi\0"

	#define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
	"mmc_auto "

	#define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
	#else
	#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
	#endif
	#else
	#define BOOT_TARGET_DEVICES_MMC(func)
	#endif

	#ifdef CONFIG_AHCI
	#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
	#else
	#define BOOT_TARGET_DEVICES_SCSI(func)
	#endif

	#ifdef CONFIG_USB_STORAGE
	#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
	#else
	#define BOOT_TARGET_DEVICES_USB(func)
	#endif

	#ifdef CONFIG_CMD_PXE
	#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
	#else
	#define BOOT_TARGET_DEVICES_PXE(func)
	#endif

	#ifdef CONFIG_CMD_DHCP
	#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
	#else
	#define BOOT_TARGET_DEVICES_DHCP(func)
	#endif

	/* FEL boot support, auto-execute boot.scr if a script address was provided */
	#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
	"bootcmd_fel=" \
	"if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
	"echo '(FEL boot)'; " \
	"source ${fel_scriptaddr}; " \
	"fi\0"
	#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
	"fel "

	#define BOOT_TARGET_DEVICES(func) \
	func(FEL, fel, na) \
	BOOT_TARGET_DEVICES_MMC(func) \
	BOOT_TARGET_DEVICES_SCSI(func) \
	BOOT_TARGET_DEVICES_USB(func) \
	BOOT_TARGET_DEVICES_PXE(func) \
	BOOT_TARGET_DEVICES_DHCP(func)

	#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
	#define BOOTCMD_SUNXI_COMPAT \
	"bootcmd_sunxi_compat=" \
	"setenv root /dev/mmcblk0p3 rootwait; " \
	"if ext2load mmc 0 0x44000000 uEnv.txt; then " \
	"echo Loaded environment from uEnv.txt; " \
	"env import -t 0x44000000 ${filesize}; " \
	"fi; " \
	"setenv bootargs console=${console} root=${root} ${extraargs}; " \
	"ext2load mmc 0 0x43000000 script.bin && " \
	"ext2load mmc 0 0x48000000 uImage && " \
	"bootm 0x48000000\0"
	#else
	#define BOOTCMD_SUNXI_COMPAT
	#endif

	#include <config_distro_bootcmd.h>

	#ifdef CONFIG_USB_KEYBOARD
	#define CONSOLE_STDIN_SETTINGS \
	"stdin=serial,usbkbd\0"
	#else
	#define CONSOLE_STDIN_SETTINGS \
	"stdin=serial\0"
	#endif

	#ifdef CONFIG_VIDEO
	#define CONSOLE_STDOUT_SETTINGS \
	"stdout=serial,vidconsole\0" \
	"stderr=serial,vidconsole\0"
	#else
	#define CONSOLE_STDOUT_SETTINGS \
	"stdout=serial\0" \
	"stderr=serial\0"
	#endif

	#define PARTS_DEFAULT \
	"name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
	"name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
	"name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
	"name=system,size=-,uuid=${uuid_gpt_system};"

	#define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"

	#ifdef CONFIG_ARM64
	#define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
	#else
	#define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
	#endif

	#define CONSOLE_ENV_SETTINGS \
	CONSOLE_STDIN_SETTINGS \
	CONSOLE_STDOUT_SETTINGS

	#ifdef CONFIG_ARM64
	#define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
	#else
	#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
	#endif

	#define CFG_EXTRA_ENV_SETTINGS \
	CONSOLE_ENV_SETTINGS \
	MEM_LAYOUT_ENV_SETTINGS \
	MEM_LAYOUT_ENV_EXTRA_SETTINGS \
	DFU_ALT_INFO_RAM \
	"fdtfile=" FDTFILE "\0" \
	"console=ttyS0,115200\0" \
	"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
	"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
	"partitions=" PARTS_DEFAULT "\0" \
	BOOTCMD_SUNXI_COMPAT \
	BOOTENV

	#endif /* _SUNXI_COMMON_CONFIG_H */