blob: 038b810460cc069b3aecd9ef8b93707554376dc7 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* QE UEC ethernet phy controller driver
*
* based on phy parts of drivers/qe/uec.c and drivers/qe/uec_phy.c
* from NXP
*
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <miiphy.h>
#include <phy.h>
#include <asm/io.h>
#include <linux/ioport.h>
#include "dm_qe_uec.h"
struct qe_uec_mdio_priv {
struct ucc_mii_mng *base;
};
static int
qe_uec_mdio_read(struct udevice *dev, int addr, int devad, int reg)
{
struct qe_uec_mdio_priv *priv = dev_get_priv(dev);
struct ucc_mii_mng *regs = priv->base;
u32 tmp_reg;
u16 value;
debug("%s: regs: %p addr: %x devad: %x reg: %x\n", __func__, regs,
addr, devad, reg);
/* Setting up the MII management Address Register */
tmp_reg = ((u32)addr << MIIMADD_PHY_ADDRESS_SHIFT) | reg;
out_be32(&regs->miimadd, tmp_reg);
/* clear MII management command cycle */
out_be32(&regs->miimcom, 0);
sync();
/* Perform an MII management read cycle */
out_be32(&regs->miimcom, MIIMCOM_READ_CYCLE);
/* Wait till MII management write is complete */
while ((in_be32(&regs->miimind)) &
(MIIMIND_NOT_VALID | MIIMIND_BUSY))
;
/* Read MII management status */
value = (u16)in_be32(&regs->miimstat);
if (value == 0xffff)
return -EINVAL;
return value;
};
static int
qe_uec_mdio_write(struct udevice *dev, int addr, int devad, int reg,
u16 value)
{
struct qe_uec_mdio_priv *priv = dev_get_priv(dev);
struct ucc_mii_mng *regs = priv->base;
u32 tmp_reg;
debug("%s: regs: %p addr: %x devad: %x reg: %x val: %x\n", __func__,
regs, addr, devad, reg, value);
/* Stop the MII management read cycle */
out_be32(&regs->miimcom, 0);
/* Setting up the MII management Address Register */
tmp_reg = ((u32)addr << MIIMADD_PHY_ADDRESS_SHIFT) | reg;
out_be32(&regs->miimadd, tmp_reg);
/* Setting up the MII management Control Register with the value */
out_be32(&regs->miimcon, (u32)value);
sync();
/* Wait till MII management write is complete */
while ((in_be32(&regs->miimind)) & MIIMIND_BUSY)
;
return 0;
};
static const struct mdio_ops qe_uec_mdio_ops = {
.read = qe_uec_mdio_read,
.write = qe_uec_mdio_write,
};
static int qe_uec_mdio_probe(struct udevice *dev)
{
struct qe_uec_mdio_priv *priv = dev_get_priv(dev);
fdt_size_t base;
ofnode node;
u32 num = 0;
int ret = -ENODEV;
priv->base = (struct ucc_mii_mng *)dev_read_addr(dev);
base = (fdt_size_t)priv->base;
/*
* idea from linux:
* drivers/net/ethernet/freescale/fsl_pq_mdio.c
*
* Find the UCC node that controls the given MDIO node
*
* For some reason, the QE MDIO nodes are not children of the UCC
* devices that control them. Therefore, we need to scan all UCC
* nodes looking for the one that encompases the given MDIO node.
* We do this by comparing physical addresses. The 'start' and
* 'end' addresses of the MDIO node are passed, and the correct
* UCC node will cover the entire address range.
*/
node = ofnode_by_compatible(ofnode_null(), "ucc_geth");
while (ofnode_valid(node)) {
fdt_size_t size;
fdt_addr_t addr;
addr = ofnode_get_addr_index(node, 0);
ret = ofnode_get_addr_size_index(node, 0, &size);
if (addr == FDT_ADDR_T_NONE) {
node = ofnode_by_compatible(node, "ucc_geth");
continue;
}
/* check if priv->base in start end */
if (base > addr && base < (addr + size)) {
ret = ofnode_read_u32(node, "cell-index", &num);
if (ret)
ret = ofnode_read_u32(node, "device-id",
&num);
break;
}
node = ofnode_by_compatible(node, "ucc_geth");
}
if (ret) {
printf("%s: no cell-index nor device-id found!", __func__);
return ret;
}
/* Setup MII master clock source */
qe_set_mii_clk_src(num - 1);
return 0;
}
static const struct udevice_id qe_uec_mdio_ids[] = {
{ .compatible = "fsl,ucc-mdio" },
{ }
};
U_BOOT_DRIVER(mvmdio) = {
.name = "qe_uec_mdio",
.id = UCLASS_MDIO,
.of_match = qe_uec_mdio_ids,
.probe = qe_uec_mdio_probe,
.ops = &qe_uec_mdio_ops,
.priv_auto = sizeof(struct qe_uec_mdio_priv),
};