blob: f2783ee65d7b1e5b330afd7306068c7c3583ef36 [file] [log] [blame]
menu "Console"
config MENU
bool
help
This is the library functionality to provide a text-based menu of
choices for the user to make choices with.
config CONSOLE_RECORD
bool "Console recording"
help
This provides a way to record console output (and provide console
input) through circular buffers. This is mostly useful for testing.
Console output is recorded even when the console is silent.
To enable console recording, call console_record_reset_enable()
from your code.
config CONSOLE_RECORD_INIT_F
bool "Enable console recording during pre-relocation init"
depends on CONSOLE_RECORD && SYS_MALLOC_F
default y
help
This option enables console recording during pre-relocation init.
CONFIG_SYS_MALLOC_F must be enabled to use this feature.
config CONSOLE_RECORD_OUT_SIZE
hex "Output buffer size"
depends on CONSOLE_RECORD
default 0x400 if CONSOLE_RECORD
help
Set the size of the console output buffer. When this fills up, no
more data will be recorded until some is removed. The buffer is
allocated immediately after the malloc() region is ready.
config CONSOLE_RECORD_OUT_SIZE_F
hex "Output buffer size before relocation"
depends on CONSOLE_RECORD
default 0x400 if CONSOLE_RECORD
help
Set the size of the console output buffer before relocation. When
this fills up, no more data will be recorded until some is removed.
The buffer is allocated immediately after the early malloc() region is
ready.
config CONSOLE_RECORD_IN_SIZE
hex "Input buffer size"
depends on CONSOLE_RECORD
default 0x100 if CONSOLE_RECORD
help
Set the size of the console input buffer. When this contains data,
tstc() and getc() will use this in preference to real device input.
The buffer is allocated immediately after the malloc() region is
ready.
config DISABLE_CONSOLE
bool "Add functionality to disable console completely"
help
Disable console (in & out).
config IDENT_STRING
string "Board specific string to be added to uboot version string"
help
This options adds the board specific name to u-boot version.
config LOGLEVEL
int "loglevel"
default 4
range 0 10
help
All Messages with a loglevel smaller than the console loglevel will
be compiled in. The loglevels are defined as follows:
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config SPL_LOGLEVEL
int
depends on SPL
default LOGLEVEL
config TPL_LOGLEVEL
int
depends on TPL
default LOGLEVEL
config VPL_LOGLEVEL
int "loglevel for VPL"
depends on VPL
default LOGLEVEL
help
All Messages with a loglevel smaller than the console loglevel will
be compiled in to VPL. See LOGLEVEL for a list of available log
levels. Setting this to a value above 4 may increase the code size
significantly.
config SILENT_CONSOLE
bool "Support a silent console"
help
This option allows the console to be silenced, meaning that no
output will appear on the console devices. This is controlled by
setting the environment variable 'silent' to a non-empty value.
Note this also silences the console when booting Linux.
When the console is set up, the variable is checked, and the
GD_FLG_SILENT flag is set. Changing the environment variable later
will update the flag.
config SPL_SILENT_CONSOLE
bool "Use a silent console in SPL"
default y if SILENT_CONSOLE && !SANDBOX
help
This selects a silent console in SPL. When enabled it drops some
output messages. The GD_FLG_SILENT flag is not used in SPL so there
is no run-time control of console messages in SPL.
Future work may allow the SPL console to be silenced completely using
this option.
config TPL_SILENT_CONSOLE
bool "Use a silent console in TPL"
default y if SILENT_CONSOLE && !SANDBOX
help
This selects a silent console in TPL. When enabled it drops some
output messages. The GD_FLG_SILENT flag is not used in TPL so there
is no run-time control of console messages in TPL.
Future work may allow the TPL console to be silenced completely using
this option.
config SILENT_U_BOOT_ONLY
bool "Only silence the U-Boot console"
depends on SILENT_CONSOLE
help
Normally when the U-Boot console is silenced, Linux's console is
also silenced (assuming the board boots into Linux). This option
allows the linux console to operate normally, even if U-Boot's
is silenced.
config SILENT_CONSOLE_UPDATE_ON_SET
bool "Changes to the 'silent' environment variable update immediately"
depends on SILENT_CONSOLE
default y if SILENT_CONSOLE
help
When the 'silent' environment variable is changed, update the
console silence flag immediately. This allows 'setenv' to be used
to silence or un-silence the console.
The effect is that any change to the variable will affect the
GD_FLG_SILENT flag.
config SILENT_CONSOLE_UPDATE_ON_RELOC
bool "Allow flags to take effect on relocation"
depends on SILENT_CONSOLE
help
In some cases the environment is not available until relocation
(e.g. NAND). This option makes the value of the 'silent'
environment variable take effect at relocation.
config SILENT_CONSOLE_UNTIL_ENV
bool "Keep console silent until environment is loaded"
depends on SILENT_CONSOLE
help
This option makes sure U-Boot will never use the console unless the
environment from flash does not contain the 'silent' variable. If
set, the console is kept silent until after the environment was
loaded. Use this in combination with PRE_CONSOLE_BUFFER to print out
earlier messages after loading the environment when allowed.
config PRE_CONSOLE_BUFFER
bool "Buffer characters before the console is available"
help
Prior to the console being initialised (i.e. serial UART
initialised etc) all console output is silently discarded.
Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
buffer any console messages prior to the console being
initialised to a buffer. The buffer is a circular buffer, so
if it overflows, earlier output is discarded.
Note that this is not currently supported in SPL. It would be
useful to be able to share the pre-console buffer with SPL.
config PRE_CON_BUF_SZ
int "Sets the size of the pre-console buffer"
depends on PRE_CONSOLE_BUFFER
default 4096
help
The size of the pre-console buffer affects how much console output
can be held before it overflows and starts discarding earlier
output. Normally there is very little output at this early stage,
unless debugging is enabled, so allow enough for ~10 lines of
text.
This is a useful feature if you are using a video console and
want to see the full boot output on the console. Without this
option only the post-relocation output will be displayed.
config PRE_CON_BUF_ADDR
hex "Address of the pre-console buffer"
depends on PRE_CONSOLE_BUFFER
default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
default 0x0f000000 if ROCKCHIP_RK3288
default 0x0f200000 if ROCKCHIP_RK3399
help
This sets the start address of the pre-console buffer. This must
be in available memory and is accessed before relocation and
possibly before DRAM is set up. Therefore choose an address
carefully.
We should consider removing this option and allocating the memory
in board_init_f_init_reserve() instead.
config CONSOLE_FLUSH_SUPPORT
bool "Enable console flush support"
default y
help
This enables compilation of flush() function for console flush support.
config CONSOLE_MUX
bool "Enable console multiplexing"
default y if VIDEO || VIDEO || LCD
help
This allows multiple devices to be used for each console 'file'.
For example, stdout can be set to go to serial and video.
Similarly, stdin can be set to come from serial and keyboard.
Input can be provided from either source. Console multiplexing
adds a small amount of size to U-Boot. Changes to the environment
variables stdout, stdin and stderr will take effect immediately.
config SYS_CONSOLE_IS_IN_ENV
bool "Select console devices from the environment"
default y if CONSOLE_MUX
help
This allows multiple input/output devices to be set at boot time.
For example, if stdout is set to "serial,vidconsole" then output
will be sent to both the serial and video devices on boot. The
environment variables can be updated after boot to change the
input/output devices.
config SYS_CONSOLE_OVERWRITE_ROUTINE
bool "Allow board control over console overwriting"
help
If this is enabled, and the board-specific function
overwrite_console() returns 1, the stdin, stderr and stdout are
switched to the serial port, else the settings in the environment
are used. If this is not enabled, the console will not be switched
to serial.
config SYS_CONSOLE_ENV_OVERWRITE
bool "Update environment variables during console init"
help
The console environment variables (stdout, stdin, stderr) can be
used to determine the correct console devices on start-up. This
option writes the console devices to these variables on console
start-up (after relocation). This causes the environment to be
updated to match the console devices actually chosen.
config SYS_CONSOLE_INFO_QUIET
bool "Don't display the console devices on boot"
help
Normally U-Boot displays the current settings for stdout, stdin
and stderr on boot when the post-relocation console is set up.
Enable this option to suppress this output. It can be obtained by
calling stdio_print_current_devices() from board code.
config SYS_STDIO_DEREGISTER
bool "Allow deregistering stdio devices"
default y if USB_KEYBOARD
help
Generally there is no need to deregister stdio devices since they
are never deactivated. But if a stdio device is used which can be
removed (for example a USB keyboard) then this option can be
enabled to ensure this is handled correctly.
config SPL_SYS_STDIO_DEREGISTER
bool "Allow deregistering stdio devices in SPL"
help
Generally there is no need to deregister stdio devices since they
are never deactivated. But if a stdio device is used which can be
removed (for example a USB keyboard) then this option can be
enabled to ensure this is handled correctly. This is very rarely
needed in SPL.
config SYS_DEVICE_NULLDEV
bool "Enable a null device for stdio"
default y if SPLASH_SCREEN || SYS_STDIO_DEREGISTER
help
Enable creation of a "nulldev" stdio device. This allows silent
operation of the console by setting stdout to "nulldev". Enable
this to use a serial console under board control.
endmenu
menu "Logging"
config LOG
bool "Enable logging support"
depends on DM
help
This enables support for logging of status and debug messages. These
can be displayed on the console, recorded in a memory buffer, or
discarded if not needed. Logging supports various categories and
levels of severity.
if LOG
config LOG_MAX_LEVEL
int "Maximum log level to record"
default 6
range 0 9
help
This selects the maximum log level that will be recorded. Any value
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config LOG_DEFAULT_LEVEL
int "Default logging level to display"
default LOG_MAX_LEVEL
range 0 LOG_MAX_LEVEL
help
This is the default logging level set when U-Boot starts. It can
be adjusted later using the 'log level' command. Note that setting
this to a value above LOG_MAX_LEVEL will be ineffective, since the
higher levels are not compiled in to U-Boot.
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config LOG_CONSOLE
bool "Allow log output to the console"
default y
help
Enables a log driver which writes log records to the console.
Generally the console is the serial port or LCD display. Only the
log message is shown - other details like level, category, file and
line number are omitted.
config LOGF_FILE
bool "Show source file name in log messages by default"
help
Show the source file name in log messages by default. This value
can be overridden using the 'log format' command.
config LOGF_LINE
bool "Show source line number in log messages by default"
help
Show the source line number in log messages by default. This value
can be overridden using the 'log format' command.
config LOGF_FUNC
bool "Show function name in log messages by default"
help
Show the function name in log messages by default. This value can
be overridden using the 'log format' command.
config LOGF_FUNC_PAD
int "Number of characters to use for function"
default 20
help
Sets the field width to use when showing the function. Set this to
a larger value if you have lots of long function names, and want
things to line up.
config LOG_SYSLOG
bool "Log output to syslog server"
depends on NET
help
Enables a log driver which broadcasts log records via UDP port 514
to syslog servers.
config SPL_LOG
bool "Enable logging support in SPL"
depends on LOG && SPL
help
This enables support for logging of status and debug messages. These
can be displayed on the console, recorded in a memory buffer, or
discarded if not needed. Logging supports various categories and
levels of severity.
if SPL_LOG
config SPL_LOG_MAX_LEVEL
int "Maximum log level to record in SPL"
depends on SPL_LOG
default 3
range 0 9
help
This selects the maximum log level that will be recorded. Any value
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config SPL_LOG_CONSOLE
bool "Allow log output to the console in SPL"
default y
help
Enables a log driver which writes log records to the console.
Generally the console is the serial port or LCD display. Only the
log message is shown - other details like level, category, file and
line number are omitted.
endif
config TPL_LOG
bool "Enable logging support in TPL"
depends on LOG && TPL
help
This enables support for logging of status and debug messages. These
can be displayed on the console, recorded in a memory buffer, or
discarded if not needed. Logging supports various categories and
levels of severity.
if TPL_LOG
config TPL_LOG_MAX_LEVEL
int "Maximum log level to record in TPL"
depends on TPL_LOG
default 3
range 0 9
help
This selects the maximum log level that will be recorded. Any value
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config TPL_LOG_CONSOLE
bool "Allow log output to the console in TPL"
default y
help
Enables a log driver which writes log records to the console.
Generally the console is the serial port or LCD display. Only the
log message is shown - other details like level, category, file and
line number are omitted.
endif
config VPL_LOG
bool "Enable logging support in VPL"
depends on LOG && VPL
help
This enables support for logging of status and debug messages. These
can be displayed on the console, recorded in a memory buffer, or
discarded if not needed. Logging supports various categories and
levels of severity.
if VPL_LOG
config VPL_LOG_MAX_LEVEL
int "Maximum log level to record in VPL"
default 3
help
This selects the maximum log level that will be recorded. Any value
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config VPL_LOG_CONSOLE
bool "Allow log output to the console in VPL"
default y
help
Enables a log driver which writes log records to the console.
Generally the console is the serial port or LCD display. Only the
log message is shown - other details like level, category, file and
line number are omitted.
endif
config LOG_ERROR_RETURN
bool "Log all functions which return an error"
help
When an error is returned in U-Boot it is sometimes difficult to
figure out the root cause. For example, reading from SPI flash may
fail due to a problem in the SPI controller or due to the flash part
not returning the expected information. This option changes
log_ret() to log any errors it sees. With this option disabled,
log_ret() is a nop.
You can add log_ret() to all functions which return an error code.
config LOG_TEST
bool "Provide a test for logging"
depends on UNIT_TEST
default y if SANDBOX
help
This enables a 'log test' command to test logging. It is normally
executed from a pytest and simply outputs logging information
in various different ways to test that the logging system works
correctly with various settings.
endif
endmenu
menu "Init options"
config BOARD_TYPES
bool "Enable board_type entry in global data struct"
help
If this option is enabled, a field will be added to the global
data struct to store an unsigned long value for the type of
platform that we have determined we are on, at run-time.
config DISPLAY_CPUINFO
bool "Display information about the CPU during start up"
default y if ARC|| ARM || NIOS2 || X86 || XTENSA || M68K
help
Display information about the CPU that U-Boot is running on
when U-Boot starts up. The function print_cpuinfo() is called
to do this.
config DISPLAY_BOARDINFO
bool "Display information about the board during early start up"
default y if ARC || ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
help
Display information about the board that U-Boot is running on
when U-Boot starts up. The board function checkboard() is called
to do this.
config DISPLAY_BOARDINFO_LATE
bool "Display information about the board during late start up"
help
Display information about the board that U-Boot is running on after
the relocation phase. The board function checkboard() is called to do
this.
menu "Start-up hooks"
config CYCLIC
bool "General-purpose cyclic execution mechanism"
help
This enables a general-purpose cyclic execution infrastructure,
to allow "small" (run-time wise) functions to be executed at
a specified frequency. Things like LED blinking or watchdog
triggering are examples for such tasks.
if CYCLIC
config CYCLIC_MAX_CPU_TIME_US
int "Sets the max allowed time for a cyclic function in us"
default 1000
help
The max allowed time for a cyclic function in us. If a functions
takes longer than this duration this function will get unregistered
automatically.
endif # CYCLIC
config EVENT
bool
help
This adds a framework for general purpose sending and processing of
events, to allow interested parties to be alerted when something
happens. This is an attempt to stem the flow of weak functions,
hooks, functions in board_f.c and board_r.c and the Kconfig options
below.
See doc/develop/event.rst for more information.
if EVENT
config EVENT_DYNAMIC
bool
help
Enable this to support adding an event spy at runtime, without adding
it to the EVENT_SPY() linker list. This increases code size slightly
but provides more flexibility for boards and subsystems that need it.
config EVENT_DEBUG
bool "Enable event debugging assistance"
default y if SANDBOX
help
Enable this get usefui features for seeing what is happening with
events, such as event-type names. This adds to the code size of
U-Boot so can be turned off for production builds.
config SPL_EVENT
bool # General-purpose event-handling mechanism in SPL
depends on SPL
help
This adds a framework for general purpose sending and processing of
events, to allow interested parties to be alerted when something
happens. This is an attempt to stem the flow of weak functions,
hooks, functions in board_f.c and board_r.c and the Kconfig options
below.
See doc/develop/event.rst for more information.
config SPL_EVENT_DYNAMIC
bool
depends on SPL_EVENT && EVENT_DYNAMIC
help
Enable this to support adding an event spy at runtime, without adding
it to the EVENT_SPY() linker list. This increases code size slightly
but provides more flexibility for boards and subsystems that need it.
endif # EVENT
config ARCH_EARLY_INIT_R
bool
help
With this option U-Boot will call arch_early_init_r() soon after
relocation. Driver model is running by this point, and the cache
is on. Note that board_early_init_r() is called first, if
enabled. This can be used to set up architecture-specific devices.
config ARCH_MISC_INIT
bool "Call arch-specific init after relocation, when console is ready"
help
With this option U-Boot will call arch_misc_init() after
relocation to allow miscellaneous arch-dependent initialisation
to be performed. This function should be defined by the board
and will be called after the console is set up, after relocation.
config BOARD_EARLY_INIT_F
bool "Call board-specific init before relocation"
help
Some boards need to perform initialisation as soon as possible
after boot. With this option, U-Boot calls board_early_init_f()
after driver model is ready in the pre-relocation init sequence.
Note that the normal serial console is not yet set up, but the
debug UART will be available if enabled.
config BOARD_EARLY_INIT_R
bool "Call board-specific init after relocation"
help
Some boards need to perform initialisation as directly after
relocation. With this option, U-Boot calls board_early_init_r()
in the post-relocation init sequence.
config BOARD_POSTCLK_INIT
bool "Call board_postclk_init"
help
Some boards need this to initialize select items, after clocks /
timebase and before env / serial.
config BOARD_LATE_INIT
bool "Execute Board late init"
help
Sometimes board require some initialization code that might
require once the actual init done, example saving board specific env,
boot-modes etc. which eventually done at late.
So this config enable the late init code with the help of board_late_init
function which should defined on respective boards.
config CLOCKS
bool "Call set_cpu_clk_info"
depends on ARM
config HWCONFIG
bool "hwconfig infrastructure"
default y if PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
config SYS_FSL_CLK
bool
depends on ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 || \
(FSL_ESDHC_IMX && (ARCH_MX5 || ARCH_MX6 || ARCH_MX7))
default y
help
Enable to call get_clocks() in board_init_f() for platforms other
than PowerPC or M68k. This is a legacy option. If not TARGET_BRPPT2
config LAST_STAGE_INIT
bool "Call board-specific as last setup step"
help
Some boards need to perform initialisation immediately before control
is passed to the command-line interpreter (e.g. for initializations
that depend on later phases in the init sequence). With this option,
U-Boot calls last_stage_init() before the command-line interpreter is
started.
config MISC_INIT_R
bool "Execute Misc Init"
default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx
default y if ARCH_OMAP2PLUS && !AM33XX
help
Enabling this option calls 'misc_init_r' function
config SYS_MALLOC_BOOTPARAMS
bool "Malloc a buffer to use for bootparams"
help
In some cases rather than using a known location to store the
bi_boot_params portion of gd we need to allocate it from our malloc pool.
config SYS_BOOTPARAMS_LEN
hex "Size of the bootparam buffer to malloc in bytes"
depends on SYS_MALLOC_BOOTPARAMS
default 0x20000 if MIPS || RCAR_64
default 0x10000
config ID_EEPROM
bool "Enable I2C connected system identifier EEPROM"
help
A number of different systems and vendors enable a vendor-specified
EEPROM that contains various identifying features.
config SYS_EEPROM_BUS_NUM
int "I2C bus number of the system identifier EEPROM"
depends on ID_EEPROM
default 0
choice
prompt "EEPROM starts with 'CCID' or 'NXID'"
depends on ID_EEPROM && (PPC || ARCH_LS1021A || FSL_LAYERSCAPE)
default SYS_I2C_EEPROM_NXID
help
Specify if the Freescale / NXP ID EEPROM starts with 'CCID' or 'NXID'
ASCII literal string.
config SYS_I2C_EEPROM_CCID
bool "EEPROM starts with 'CCID'"
config SYS_I2C_EEPROM_NXID
bool "EEPROM starts with 'NXID'"
endchoice
config PCI_INIT_R
bool "Enumerate PCI buses during init"
depends on PCI
help
With this option U-Boot will call pci_init() soon after relocation,
which will enumerate PCI buses. This is needed, for instance, in the
case of DM PCI-based Ethernet devices, which will not be detected
without having the enumeration performed earlier.
config RESET_PHY_R
bool "Reset ethernet PHY during init"
help
Implement reset_phy() in board code if required to reset the ethernet
PHY.
endmenu
endmenu # Init options
menu "Security support"
config HASH
bool # "Support hashing API (SHA1, SHA256, etc.)"
help
This provides a way to hash data in memory using various supported
algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
and the algorithms it supports are defined in common/hash.c. See
also CMD_HASH for command-line access.
config AVB_VERIFY
bool "Build Android Verified Boot operations"
depends on LIBAVB
depends on MMC
depends on PARTITION_UUIDS
help
This option enables compilation of bootloader-dependent operations,
used by Android Verified Boot 2.0 library (libavb). Includes:
* Helpers to process strings in order to build OS bootargs.
* Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c.
* Helpers to alloc/init/free avb ops.
if AVB_VERIFY
config AVB_BUF_ADDR
hex "Define AVB buffer address"
default FASTBOOT_BUF_ADDR
help
AVB requires a buffer for memory transactions. This variable defines the
buffer address.
config AVB_BUF_SIZE
hex "Define AVB buffer SIZE"
default FASTBOOT_BUF_SIZE
help
AVB requires a buffer for memory transactions. This variable defines the
buffer size.
endif # AVB_VERIFY
config SCP03
bool "Build SCP03 - Secure Channel Protocol O3 - controls"
depends on OPTEE || SANDBOX
depends on TEE
help
This option allows U-Boot to enable and or provision SCP03 on an OPTEE
controlled Secured Element.
config SPL_HASH
bool # "Support hashing API (SHA1, SHA256, etc.)"
help
This provides a way to hash data in memory using various supported
algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
and the algorithms it supports are defined in common/hash.c. See
also CMD_HASH for command-line access.
config TPL_HASH
bool # "Support hashing API (SHA1, SHA256, etc.)"
help
This provides a way to hash data in memory using various supported
algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
and the algorithms it supports are defined in common/hash.c. See
also CMD_HASH for command-line access.
config STACKPROTECTOR
bool "Stack Protector buffer overflow detection"
help
Enable stack smash detection through compiler's stack-protector
canary logic
config SPL_STACKPROTECTOR
bool "Stack Protector buffer overflow detection for SPL"
depends on STACKPROTECTOR && SPL
config TPL_STACKPROTECTOR
bool "Stack Protector buffer overflow detection for TPL"
depends on STACKPROTECTOR && TPL
config BOARD_RNG_SEED
bool "Provide /chosen/rng-seed property to the linux kernel"
help
Selecting this option requires the board to define a
board_rng_seed() function, which should return a buffer
which will be used to populate the /chosen/rng-seed property
in the device tree for the OS being booted.
It is up to the board code (and more generally the whole
BSP) where and how to store (or generate) such a seed, how
to ensure a given seed is only used once, how to create a
new seed for use on subsequent boots, and whether or not the
kernel should account any entropy from the given seed.
endmenu
menu "Update support"
config UPDATE_COMMON
bool
select DFU_WRITE_ALT
config UPDATE_TFTP
bool "Auto-update using fitImage via TFTP"
depends on FIT && OF_LIBFDT && !MTD_NOR_FLASH
select UPDATE_COMMON
help
This option allows performing update of NOR with data in fitImage
sent via TFTP boot.
config UPDATE_TFTP_CNT_MAX
int "The number of connection retries during auto-update"
default 0
depends on UPDATE_TFTP || DFU_TFTP
config UPDATE_TFTP_MSEC_MAX
int "Delay in mSec to wait for the TFTP server during auto-update"
default 100
depends on UPDATE_TFTP || DFU_TFTP
config UPDATE_LOAD_ADDR
hex "Address in memory to load the update to"
depends on UPDATE_TFTP || DFU_TFTP
default 0x100000
help
This option defines the location in memory to be used to load the
update to, if 'loadaddr' is not set in the environment.
config UPDATE_FIT
bool "Firmware update using fitImage"
depends on FIT && OF_LIBFDT
depends on DFU
select UPDATE_COMMON
help
This option allows performing update of DFU-capable storage with
data in fitImage.
config ANDROID_AB
bool "Android A/B updates"
help
If enabled, adds support for the new Android A/B update model. This
allows the bootloader to select which slot to boot from based on the
information provided by userspace via the Android boot_ctrl HAL. This
allows a bootloader to try a new version of the system but roll back
to previous version if the new one didn't boot all the way.
endmenu
menu "Blob list"
config BLOBLIST
bool "Support for a bloblist"
help
This enables support for a bloblist in U-Boot, which can be passed
from TPL to SPL to U-Boot proper (and potentially to Linux). The
blob list supports multiple binary blobs of data, each with a tag,
so that different U-Boot components can store data which can survive
through to the next phase of the boot.
config SPL_BLOBLIST
bool "Support for a bloblist in SPL"
depends on BLOBLIST && SPL_LIBGENERIC_SUPPORT && SPL_LIBCOMMON_SUPPORT
default y if SPL
help
This enables a bloblist in SPL. If this is the first part of U-Boot
to run, then the bloblist is set up in SPL and passed to U-Boot
proper. If TPL also has a bloblist, then SPL uses the one from there.
config TPL_BLOBLIST
bool "Support for a bloblist in TPL"
depends on BLOBLIST && TPL_LIBGENERIC_SUPPORT && TPL_LIBCOMMON_SUPPORT
default y if TPL
help
This enables a bloblist in TPL. The bloblist is set up in TPL and
passed to SPL and U-Boot proper.
config VPL_BLOBLIST
bool "Support for a bloblist in VPL"
depends on BLOBLIST && VPL_LIBGENERIC_SUPPORT && VPL_LIBCOMMON_SUPPORT
default y if VPL
help
This enables a bloblist in VPL. The bloblist is set up in VPL and
passed to SPL and U-Boot proper.
if BLOBLIST
choice
prompt "Bloblist location"
help
Select the location of the bloblist, via various means.
config BLOBLIST_FIXED
bool "Place bloblist at a fixed address in memory"
help
Select this to used a fixed memory address for the bloblist. If the
bloblist exists at this address from a previous phase, it used as is.
If not it is created at this address in U-Boot.
config BLOBLIST_ALLOC
bool "Allocate bloblist"
help
Allocate the bloblist using malloc(). This avoids the need to
specify a fixed address on systems where this is unknown or can
change at runtime.
endchoice
config BLOBLIST_ADDR
hex "Address of bloblist"
default 0xc000 if SANDBOX
depends on BLOBLIST_FIXED
help
Sets the address of the bloblist, set up by the first part of U-Boot
which runs. Subsequent U-Boot phases typically use the same address.
This is not used if BLOBLIST_ALLOC is selected.
config BLOBLIST_SIZE
hex "Size of bloblist"
default 0x400
help
Sets the size of the bloblist in bytes. This must include all
overhead (alignment, bloblist header, record header). The bloblist
is set up in the first part of U-Boot to run (TPL, SPL or U-Boot
proper), and this sane bloblist is used for subsequent phases.
config BLOBLIST_SIZE_RELOC
hex "Size of bloblist after relocation"
default BLOBLIST_SIZE if BLOBLIST_FIXED || BLOBLIST_ALLOC
default 0 if BLOBLIST_PASSAGE
help
Sets the size of the bloblist in bytes after relocation. Since U-Boot
has a lot more memory available then, it is possible to use a larger
size than the one set up by SPL. This bloblist is set up during the
relocation process.
endif # BLOBLIST
if SPL_BLOBLIST
choice
prompt "Bloblist location in SPL"
help
Select the location of the bloblist, via various means. Typically
you should use the same value for SPL as for U-Boot, since they need
to look in the same place. But if BLOBLIST_ALLOC is used, then a
fresh bloblist will be created each time, since there is no shared
address (between phases) for the bloblist.
config SPL_BLOBLIST_FIXED
bool "Place bloblist at a fixed address in memory"
help
Select this to used a fixed memory address for the bloblist. If the
bloblist exists at this address from a previous phase, it used as is.
If not it is created at this address in SPL.
config SPL_BLOBLIST_ALLOC
bool "Allocate bloblist"
help
Allocate the bloblist using malloc(). This avoids the need to
specify a fixed address on systems where this is unknown or can
change at runtime.
endchoice
endif # SPL_BLOBLIST
if TPL_BLOBLIST
choice
prompt "Bloblist location in TPL"
help
Select the location of the bloblist, via various means. Typically
you should use the same value for TPL as for U-Boot, since they need
to look in the same place. But if BLOBLIST_ALLOC is used, then a
fresh bloblist will be created each time, since there is no shared
address (between phases) for the bloblist.
config TPL_BLOBLIST_FIXED
bool "Place bloblist at a fixed address in memory"
help
Select this to used a fixed memory address for the bloblist. If the
bloblist exists at this address from a previous phase, it used as is.
If not it is created at this address in TPL.
config TPL_BLOBLIST_ALLOC
bool "Allocate bloblist"
help
Allocate the bloblist using malloc(). This avoids the need to
specify a fixed address on systems where this is unknown or can
change at runtime.
endchoice
endif # TPL_BLOBLIST
if VPL_BLOBLIST
choice
prompt "Bloblist location in VPL"
help
Select the location of the bloblist, via various means. Typically
you should use the same value for VPL as for U-Boot, since they need
to look in the same place. But if BLOBLIST_ALLOC is used, then a
fresh bloblist will be created each time, since there is no shared
address (between phases) for the bloblist.
config VPL_BLOBLIST_FIXED
bool "Place bloblist at a fixed address in memory"
help
Select this to used a fixed memory address for the bloblist. If the
bloblist exists at this address from a previous phase, it used as is.
If not it is created at this address in VPL.
config VPL_BLOBLIST_ALLOC
bool "Allocate bloblist"
help
Allocate the bloblist using malloc(). This avoids the need to
specify a fixed address on systems where this is unknown or can
change at runtime.
endchoice
endif # VPL_BLOBLIST
endmenu
source "common/spl/Kconfig"
config IMAGE_SIGN_INFO
bool
select SHA1
select SHA256
help
Enable image_sign_info helper functions.
if IMAGE_SIGN_INFO
config SPL_IMAGE_SIGN_INFO
bool
select SHA1
select SHA256
help
Enable image_sign_info helper functions in SPL.
config VPL_IMAGE_SIGN_INFO
bool
select SHA1
select SHA256
help
Enable image_sign_info helper functions in SPL.
endif
config FDT_SIMPLEFB
bool "FDT tools for simplefb support"
depends on OF_LIBFDT
help
Enable the fdt tools to manage the simple fb nodes in device tree.
These functions can be used by board to indicate to the OS
the presence of the simple frame buffer with associated reserved
memory
config IO_TRACE
bool