blob: 1ba012ca45d6b76398689c49e360f830e27dec93 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
*/
#include <debug_uart.h>
#include <linux/io.h>
#include <linux/serial_reg.h>
#include "../sg-regs.h"
#include "../soc-info.h"
#include "debug-uart.h"
#define UNIPHIER_UART_TX 0x00
#define UNIPHIER_UART_LCR_MCR 0x10
#define UNIPHIER_UART_LSR 0x14
#define UNIPHIER_UART_LDR 0x24
static void _debug_uart_putc(int c)
{
void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE);
while (!(readl(base + UNIPHIER_UART_LSR) & UART_LSR_THRE))
;
writel(c, base + UNIPHIER_UART_TX);
}
#ifdef CONFIG_SPL_BUILD
void sg_set_pinsel(unsigned int pin, unsigned int muxval,
unsigned int mux_bits, unsigned int reg_stride)
{
unsigned int shift = pin * mux_bits % 32;
void __iomem *reg = sg_base + SG_PINCTRL_BASE +
pin * mux_bits / 32 * reg_stride;
u32 mask = (1U << mux_bits) - 1;
u32 tmp;
tmp = readl(reg);
tmp &= ~(mask << shift);
tmp |= (mask & muxval) << shift;
writel(tmp, reg);
}
void sg_set_iectrl(unsigned int pin)
{
unsigned int bit = pin % 32;
void __iomem *reg = sg_base + SG_IECTRL + pin / 32 * 4;
u32 tmp;
tmp = readl(reg);
tmp |= 1 << bit;
writel(tmp, reg);
}
#endif
void _debug_uart_init(void)
{
#ifdef CONFIG_SPL_BUILD
void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE);
unsigned int divisor;
switch (uniphier_get_soc_id()) {
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
case UNIPHIER_LD4_ID:
divisor = uniphier_ld4_debug_uart_init();
break;
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
case UNIPHIER_PRO4_ID:
divisor = uniphier_pro4_debug_uart_init();
break;
#endif
#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
case UNIPHIER_SLD8_ID:
divisor = uniphier_sld8_debug_uart_init();
break;
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
case UNIPHIER_PRO5_ID:
divisor = uniphier_pro5_debug_uart_init();
break;
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
case UNIPHIER_PXS2_ID:
divisor = uniphier_pxs2_debug_uart_init();
break;
#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
case UNIPHIER_LD6B_ID:
divisor = uniphier_ld6b_debug_uart_init();
break;
#endif
default:
return;
}
writel(UART_LCR_WLEN8 << 8, base + UNIPHIER_UART_LCR_MCR);
writel(divisor, base + UNIPHIER_UART_LDR);
#endif
}
DEBUG_UART_FUNCS