blob: cbf52c88b9a4c1d8434536060ed198abca09a5c3 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
/dts-v1/;
#include "zynq-7000.dtsi"
/ {
model = "Zynq DLC20 Rev1.0";
compatible = "xlnx,zynq-dlc20-rev1.0", "xlnx,zynq-dlc20",
"xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
i2c0 = &i2c0;
serial0 = &uart1;
spi0 = &qspi;
mmc0 = &sdhci0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x20000000>;
};
chosen {
bootargs = "earlyprintk";
stdout-path = "serial0:115200n8";
};
usb_phy0: phy0@e0002000 {
compatible = "ulpi-phy";
#phy-cells = <0>;
reg = <0xe0002000 0x1000>;
view-port = <0x0170>;
drv-vbus;
};
};
&clkc {
ps-clk-frequency = <33333333>; /* U7 */
};
&gem0 {
status = "okay"; /* MIO16-MIO27, MDIO MIO52/53 */
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy>;
ethernet_phy: ethernet-phy@7 { /* rtl8211e - U25 */
reg = <1>;
};
};
&i2c0 {
status = "okay"; /* MIO14/15 */
clock-frequency = <400000>;
/* U46 - m24c08 */
eeprom: eeprom@54 {
compatible = "atmel,24c08";
reg = <0x54>;
};
};
&qspi {
bootph-all;
status = "okay";
is-dual = <0>;
num-cs = <1>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
flash@0 {
/* Rev1.0 W25Q128FWSIG, RevC N25Q128A */
compatible = "n25q128a11", "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <50000000>;
};
};
&sdhci0 {
bootph-all;
status = "okay"; /* EMMC MTFC4GACAJCN - MIO40-MIO45 */
non-removable;
bus-width = <4>;
};
&uart1 {
bootph-all;
status = "okay"; /* MIO8/9 */
};
&usb0 {
status = "okay"; /* MIO28-MIO39 */
dr_mode = "device";
usb-phy = <&usb_phy0>;
};
&watchdog0 {
reset-on-timeout;
};