blob: 2b93d089384ef8cf139c7af9e835ecc2b2942db9 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* sam9x60.dtsi - Device Tree Include file for SAM9X60 SoC.
*
* Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
*
* Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
*/
#include "skeleton.dtsi"
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clk/at91.h>
/{
model = "Microchip SAM9X60 SoC";
compatible = "microchip,sam9x60";
aliases {
serial0 = &dbgu;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
gpio3 = &pioD;
spi0 = &qspi;
};
clocks {
slow_rc_osc: slow_rc_osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <18500>;
};
main_rc: main_rc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12000000>;
};
slow_xtal: slow_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
};
main_xtal: main_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
ARM9260_0: cpu@0 {
device_type = "cpu";
compatible = "arm,arm926ej-s";
clocks = <&pmc PMC_TYPE_CORE 19>, <&pmc PMC_TYPE_CORE 11>, <&main_xtal>;
clock-names = "cpu", "master", "xtal";
};
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
usb1: usb@600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 21>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
usb2: usb@700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
clocks = <&pmc PMC_TYPE_CORE 8>, <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usb_clk", "ehci_clk";
assigned-clocks = <&pmc PMC_TYPE_CORE 8>;
assigned-clock-rates = <480000000>;
status = "disabled";
};
ebi: ebi@10000000 {
compatible = "microchip,sam9x60-ebi";
#address-cells = <2>;
#size-cells = <1>;
atmel,smc = <&smc>;
microchip,sfr = <&sfr>;
reg = <0x10000000 0x60000000>;
ranges = <0x0 0x0 0x10000000 0x10000000
0x1 0x0 0x20000000 0x10000000
0x2 0x0 0x30000000 0x10000000
0x3 0x0 0x40000000 0x10000000
0x4 0x0 0x50000000 0x10000000
0x5 0x0 0x60000000 0x10000000>;
clocks = <&pmc PMC_TYPE_CORE 11>;
status = "disabled";
nand_controller: nand-controller {
compatible = "microchip,sam9x60-nand-controller";
ecc-engine = <&pmecc>;
#address-cells = <2>;
#size-cells = <1>;
ranges;
status = "disabled";
};
};
sdhci0: sdhci-host@80000000 {
compatible = "microchip,sam9x60-sdhci";
reg = <0x80000000 0x300>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
clock-names = "hclock", "multclk";
assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
assigned-clock-rates = <100000000>;
assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhci0>;
};
sdhci1: sdhci-host@90000000 {
compatible = "microchip,sam9x60-sdhci";
reg = <0x90000000 0x300>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
clock-names = "hclock", "multclk";
assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
assigned-clock-rates = <100000000>;
assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhci1>;
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
qspi: spi@f0014000 {
compatible = "microchip,sam9x60-qspi";
reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
reg-names = "qspi_base", "qspi_mmap";
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 18>; /* ID_QSPI */
clock-names = "pclk", "qspick";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
flx0: flexcom@f801c600 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf801c000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf801c000 0x800>;
status = "disabled";
};
macb0: ethernet@f802c000 {
compatible = "cdns,sam9x60-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii>;
clock-names = "hclk", "pclk";
clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
status = "disabled";
};
sfr: sfr@f8050000 {
compatible = "microchip,sam9x60-sfr", "syscon";
reg = <0xf8050000 0x100>;
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
clock-names = "usart";
};
pinctrl {
#address-cells = <1>;
#size-cells = <1>;
compatible = "microchip,sam9x60-pinctrl", "simple-bus";
ranges = <0xfffff400 0xfffff400 0x800>;
reg = <0xfffff400 0x200 /* pioA */
0xfffff600 0x200 /* pioB */
0xfffff800 0x200 /* pioC */
0xfffffa00 0x200>; /* pioD */
/* shared pinctrl settings */
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
macb0 {
pinctrl_macb0_rmii: macb0_rmii-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
};
};
sdhci0 {
pinctrl_sdhci0: sdhci0 {
atmel,pins =
<AT91_PIOA 17 AT91_PERIPH_A
(AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA17 CK periph A with pullup */
AT91_PIOA 16 AT91_PERIPH_A
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA16 CMD periph A with pullup */
AT91_PIOA 15 AT91_PERIPH_A
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA15 DAT0 periph A */
AT91_PIOA 18 AT91_PERIPH_A
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA18 DAT1 periph A with pullup */
AT91_PIOA 19 AT91_PERIPH_A
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA19 DAT2 periph A with pullup */
AT91_PIOA 20 AT91_PERIPH_A
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA20 DAT3 periph A with pullup */
};
};
sdhci1 {
pinctrl_sdhci1: sdhci1 {
atmel,pins =
<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */
AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */
AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */
AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */
AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */
AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */
};
};
};
pmecc: ecc-engine@ffffe000 {
compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
reg = <0xffffe000 0x300>,
<0xffffe600 0x100>;
};
smc: smc@ffffea00 {
compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
reg = <0xffffea00 0x100>;
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
#gpio-cells = <2>;
gpio-controller;
clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@fffff600 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
#gpio-cells = <2>;
gpio-controller;
clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioC: gpio@fffff800 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
#gpio-cells = <2>;
gpio-controller;
clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
};
pioD: gpio@fffffa00 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
#gpio-cells = <2>;
gpio-controller;
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
};
pmc: pmc@fffffc00 {
compatible = "microchip,sam9x60-pmc";
reg = <0xfffffc00 0x200>;
#clock-cells = <2>;
clocks = <&clk32 1>, <&clk32 0>, <&main_xtal>, <&main_rc>;
clock-names = "td_slck", "md_slck", "main_xtal", "main_rc";
status = "okay";
};
reset_controller: rstc@fffffe00 {
compatible = "microchip,sam9x60-rstc";
reg = <0xfffffe00 0x10>;
clocks = <&clk32 0>;
};
pit: timer@fffffe40 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe40 0x10>;
clocks = <&pmc PMC_TYPE_CORE 11>; /* ID_MCK. */
};
pit64b0: timer@f0028000 {
compatible = "microchip,sam9x60-pit64b";
reg = <0xf0028000 0xec>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
clock-names = "pclk", "gclk";
};
clk32: sckc@fffffe50 {
compatible = "microchip,sam9x60-sckc";
reg = <0xfffffe50 0x4>;
clocks = <&slow_rc_osc>, <&slow_xtal>;
#clock-cells = <1>;
};
};
};
onewire_tm: onewire {
compatible = "w1-gpio";
status = "disabled";
};
};