blob: 8066f7fb649ab42cf643a781d545a6624e6dc602 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
*/
/dts-v1/;
#include <dt-bindings/net/qca-ar803x.h>
#include "imx8mp.dtsi"
/ {
model = "Data Modul i.MX8M Plus eDM SBC";
compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp";
aliases {
rtc0 = &rtc;
rtc1 = &snvs_rtc;
};
chosen {
stdout-path = &uart3;
};
memory@40000000 {
device_type = "memory";
/* There are 1/2/4 GiB options, adjusted by bootloader. */
reg = <0x0 0x40000000 0 0x40000000>;
};
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_panel_backlight>;
brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
default-brightness-level = <7>;
enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
pwms = <&pwm1 0 5000000 0>;
/* Disabled by default, unless display board plugged in. */
status = "disabled";
};
clk_xtal25: clk-xtal25 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
panel: panel {
backlight = <&backlight>;
power-supply = <&reg_panel_vcc>;
/* Disabled by default, unless display board plugged in. */
status = "disabled";
};
reg_panel_vcc: regulator-panel-vcc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_panel_vcc_reg>;
regulator-name = "PANEL_VCC";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 6 0>;
enable-active-high;
/* Disabled by default, unless display board plugged in. */
status = "disabled";
};
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 19 0>; /* SD2_RESET */
off-on-delay-us = <12000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "VDD_3V3_SD";
startup-delay-us = <100>;
vin-supply = <&buck4>;
};
watchdog {
/* TPS3813 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_watchdog_gpio>;
compatible = "linux,wdt-gpio";
always-running;
gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
hw_algo = "level";
/* Reset triggers in 2..3 seconds */
hw_margin_ms = <1500>;
/* Disabled by default */
status = "disabled";
};
};
&A53_0 {
cpu-supply = <&buck2>;
};
&A53_1 {
cpu-supply = <&buck2>;
};
&A53_2 {
cpu-supply = <&buck2>;
};
&A53_3 {
cpu-supply = <&buck2>;
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
flash@0 { /* W25Q128JVEI */
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>; /* Up to 133 MHz */
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
};
};
&ecspi2 { /* Feature connector SPI */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
/* Disabled by default, unless feature board plugged in. */
status = "disabled";
};
&ecspi3 { /* Display connector SPI */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
/* Disabled by default, unless display board plugged in. */
status = "disabled";
};
&eqos { /* First ethernet */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-handle = <&phy_eqos>;
phy-mode = "rgmii-id";
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
/* Atheros AR8031 PHY */
phy_eqos: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
/*
* Dedicated ENET_WOL# signal is unused, the PHY
* can wake the SoC up via INT signal as well.
*/
interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <10000>;
qca,keep-pll-enabled;
vddio-supply = <&vddio_eqos>;
vddio_eqos: vddio-regulator {
regulator-name = "VDDIO_EQOS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddh_eqos: vddh-regulator {
regulator-name = "VDDH_EQOS";
};
};
};
};
&fec { /* Second ethernet */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-handle = <&phy_fec>;
phy-mode = "rgmii-id";
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* Atheros AR8031 PHY */
phy_fec: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
/*
* Dedicated ENET_WOL# signal is unused, the PHY
* can wake the SoC up via INT signal as well.
*/
interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <10000>;
qca,keep-pll-enabled;
vddio-supply = <&vddio_fec>;
vddio_fec: vddio-regulator {
regulator-name = "VDDIO_FEC";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddh_fec: vddh-regulator {
regulator-name = "VDDH_FEC";
};
};
};
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
status = "okay";
};
&gpio1 {
gpio-line-names =
"", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#",
"", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03",
"GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#",
"", "", "", "ENET_RST#",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio2 {
gpio-line-names =
"", "", "ENET2_INT#", "", "", "", "", "",
"WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#",
"", "", "", "",
"", "", "", "SD2_RESET#", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio3 {
gpio-line-names =
"BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
"", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
"CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "",
"", "", "EEPROM_WP_1V8#", "", "", "", "", "",
"MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#",
"", "M2_W_DISABLE1_1V8#",
"M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3",
"", "", "", "";
};
&gpio4 {
gpio-line-names =
"DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#",
"", "DIS_USB_DN1", "DIS_USB_DN2", "",
"", "", "", "", "", "", "", "";
};
&gpio5 {
gpio-line-names =
"", "", "", "", "", "WDOG_EN", "", "",
"", "SPI1_CS#", "", "",
"", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
"I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
"", "", "", "",
"", "SPI3_CS#", "", "", "", "", "", "";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
usb-hub@2c {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_hub>;
compatible = "microchip,usb2514bi";
reg = <0x2c>;
individual-port-switching;
reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
self-powered;
};
eeprom: eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
rtc: rtc@68 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
compatible = "st,m41t62";
reg = <0x68>;
interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
};
pcieclk: clk@6a {
compatible = "renesas,9fgv0241";
reg = <0x6a>;
clocks = <&clk_xtal25>;
#clock-cells = <1>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
pmic: pmic@25 {
compatible = "nxp,pca9450c";
reg = <0x25>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
/*
* i.MX 8M Plus Data Sheet for Consumer Products
* 3.1.4 Operating ranges
* MIMX8ML8CVNKZAB
*/
regulators {
buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-ramp-delay = <3125>;
regulator-always-on;
regulator-boot-on;
};
buck2: BUCK2 { /* VDD_ARM */
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-ramp-delay = <3125>;
regulator-always-on;
regulator-boot-on;
};
buck4: BUCK4 { /* VDD_3V3 */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
buck5: BUCK5 { /* VDD_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
buck6: BUCK6 { /* NVCC_DRAM_1V1 */
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
};
ldo1: LDO1 { /* NVCC_SNVS_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo3: LDO3 { /* VDDA_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4: LDO4 { /* PMIC_LDO4 */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo5: LDO5 { /* NVCC_SD2 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
};
&i2c5 { /* HDMI EDID bus */
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c5>;
pinctrl-1 = <&pinctrl_i2c5_gpio>;
scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
<&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
<&pinctrl_panel_expansion>;
pinctrl_ecspi1: ecspi1-grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44
MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44
MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44
MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40
>;
};
pinctrl_ecspi2: ecspi2-grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40
>;
};
pinctrl_ecspi3: ecspi3-grp {
fsl,pins = <
MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x44
MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x44
MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x44
MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x40
>;
};
pinctrl_eqos: eqos-grp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
/* ENET_RST# */
MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x6
/* ENET_INT# */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000090
>;
};
pinctrl_fec: fec-grp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
/* ENET2_RST# */
MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x6
/* ENET2_INT# */
MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x40000090
>;
};
pinctrl_flexcan1: flexcan1-grp {
fsl,pins = <
MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
>;
};
pinctrl_hog_feature: hog-feature-grp {
fsl,pins = <
/* GPIO5_IO03 */
MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x40000006
/* GPIO5_IO04 */
MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40000006
/* CAN_INT# */
MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x40000090
>;
};
pinctrl_hog_panel: hog-panel-grp {
fsl,pins = <
/* GRAPHICS_GPIO0_1V8 */
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x26
>;
};
pinctrl_hog_misc: hog-misc-grp {
fsl,pins = <
/* ENET_WOL# -- shared by both PHYs */
MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x40000090
/* PG_V_IN_VAR# */
MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x40000000
/* CSI2_PD_1V8 */
MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x0
/* CSI2_RESET_1V8# */
MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x0
/* DIS_USB_DN1 */
MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x0
/* DIS_USB_DN2 */
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x0
/* EEPROM_WP_1V8# */
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x100
/* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x0
/* GRAPHICS_PRSNT_1V8# */
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000000
/* CLK_CCM_CLKO1_3V3 */
MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x10
>;
};
pinctrl_hog_sbc: hog-sbc-grp {
fsl,pins = <
/* MEMCFG[0..2] straps */
MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x40000140
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x40000140
MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000140
>;
};
pinctrl_i2c1: i2c1-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x40000084
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x40000084
>;
};
pinctrl_i2c1_gpio: i2c1-gpio-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x84
MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x84
>;
};
pinctrl_i2c2: i2c2-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x40000084
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x40000084
>;
};
pinctrl_i2c2_gpio: i2c2-gpio-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x84
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x84
>;
};
pinctrl_i2c3: i2c3-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084
>;
};
pinctrl_i2c3_gpio: i2c3-gpio-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84
MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84
>;
};
pinctrl_i2c5: i2c5-grp {
fsl,pins = <
MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084
MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084
>;
};
pinctrl_i2c5_gpio: i2c5-gpio-grp {
fsl,pins = <
MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84
MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84
>;
};
pinctrl_panel_backlight: panel-backlight-grp {
fsl,pins = <
/* BL_ENABLE_1V8 */
MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x104
>;
};
pinctrl_panel_expansion: panel-expansion-grp {
fsl,pins = <
/* DSI_RESET_1V8# */
MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x2
/* DSI_IRQ_1V8# */
MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000090
>;
};
pinctrl_panel_pwm: panel-pwm-grp {
fsl,pins = <
/* BL_PWM_3V3 */
MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT 0x12
>;
};
pinctrl_panel_vcc_reg: panel-vcc-grp {
fsl,pins = <
/* TFT_ENABLE_1V8 */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x104
>;
};
pinctrl_pcie0: pcie-grp {
fsl,pins = <
/* M2_PCIE_RST# */
MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2
/* M2_W_DISABLE1_1V8# */
MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x2
/* M2_W_DISABLE2_1V8# */
MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x2
/* CLK_M2_32K768 */
MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x14
/* M2_PCIE_WAKE# */
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x40000140
/* M2_PCIE_CLKREQ# */
MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61
>;
};
pinctrl_pdm: pdm-grp {
fsl,pins = <
/* PDM_SEL */
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x0
MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK 0x0
MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00 0x0
>;
};
pinctrl_pmic: pmic-grp {
fsl,pins = <
/* PMIC_nINT */
MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090
>;
};
pinctrl_rtc: rtc-grp {
fsl,pins = <
/* RTC_IRQ# */
MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000090
>;
};
pinctrl_sai1: sai1-grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0xd6
MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0xd6
MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK 0xd6
MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK 0xd6
MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0xd6
>;
};
pinctrl_sai2: sai2-grp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6
MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6
>;
};
pinctrl_sai3: sai3-grp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6
MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6
MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6
MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6
MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6
>;
};
pinctrl_uart1: uart1-grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x49
MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x49
MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS 0x49
MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49
>;
};
pinctrl_uart2: uart2-grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x49
MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x49
MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49
MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49
>;
};
pinctrl_uart3: uart3-grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49
MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49
>;
};
pinctrl_uart4: uart4-grp {
fsl,pins = <
MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49
MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49
>;
};
pinctrl_usdhc2: usdhc2-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20
>;
};
pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080
>;
};
pinctrl_usdhc3: usdhc3-grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
>;
};
pinctrl_usb_hub: usb-hub-grp {
fsl,pins = <
/* USBHUB_RESET# */
MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x4
>;
};
pinctrl_usb1: usb1-grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x6
MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x80
>;
};
pinctrl_watchdog_gpio: watchdog-gpio-grp {
fsl,pins = <
/* WDOG_B# */
MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x26
/* WDOG_EN -- ungate WDT RESET# signal propagation */
MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x6
/* WDOG_KICK# / WDI */
MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x26
>;
};
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_panel_pwm>;
/* Disabled by default, unless display board plugged in. */
status = "disabled";
};
/* SD slot */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
status = "okay";
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
vmmc-supply = <&buck4>;
vqmmc-supply = <&buck5>;
bus-width = <8>;
non-removable;
status = "okay";
};
&uart1 { /* RS485 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
status = "disabled"; /* Optional */
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
uart-has-rtscts;
status = "okay";
};
&uart3 { /* A53 Debug */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
&usb3_0 {
fsl,over-current-active-low;
status = "okay";
};
&usb_dwc3_0 { /* Lower plug direct */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
dr_mode = "host";
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&usb_dwc3_1 { /* Upper plug via HUB */
dr_mode = "host";
status = "okay";
};
&wdog1 {
status = "okay";
};