blob: aaa59598bd4c058aeaf88f3ac8ac4657dc3c56f3 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LX2160ARDB device tree source
*
* Author: Priyanka Jain <priyanka.jain@nxp.com>
* Sriram Dash <sriram.dash@nxp.com>
*
* Copyright 2018, 2023 NXP
*
*/
/dts-v1/;
#include "fsl-lx2160a.dtsi"
/ {
model = "NXP Layerscape LX2160ARDB Board";
compatible = "fsl,lx2160ardb", "fsl,lx2160a";
aliases {
spi0 = &fspi;
serial0 = &uart0;
};
};
&dpmac3 {
status = "okay";
phy-handle = <&aquantia_phy1>;
phy-connection-type = "usxgmii";
};
&dpmac4 {
status = "okay";
phy-handle = <&aquantia_phy2>;
phy-connection-type = "usxgmii";
};
&dpmac17 {
status = "okay";
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii-id";
};
&dpmac18 {
status = "okay";
phy-handle = <&rgmii_phy2>;
phy-connection-type = "rgmii-id";
};
&emdio1 {
status = "okay";
rgmii_phy1: ethernet-phy@1 {
/* AR8035 PHY - "compatible" property not strictly needed */
compatible = "ethernet-phy-id004d.d072";
reg = <0x1>;
/* Poll mode - no "interrupts" property defined */
};
rgmii_phy2: ethernet-phy@2 {
/* AR8035 PHY - "compatible" property not strictly needed */
compatible = "ethernet-phy-id004d.d072";
reg = <0x2>;
/* Poll mode - no "interrupts" property defined */
};
aquantia_phy1: ethernet-phy@4 {
/* AQR107 PHY - "compatible" property not strictly needed */
compatible = "ethernet-phy-ieee802.3-c45";
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x4>;
};
aquantia_phy2: ethernet-phy@5 {
/* AQR107 PHY - "compatible" property not strictly needed */
compatible = "ethernet-phy-ieee802.3-c45";
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5>;
};
};
&esdhc0 {
status = "okay";
};
&esdhc1 {
status = "okay";
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
};
&fspi {
status = "okay";
mt35xu512aba0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <1>;
};
mt35xu512aba1: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <1>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <1>;
};
};
&i2c0 {
status = "okay";
bootph-all;
};
&i2c4 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
};
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&sata2 {
status = "okay";
};
&sata3 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};