blob: 9230dd3fd96c821e8c5db7d2581827082e9b9fac [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Qualcomm APQ8016 based Dragonboard 410C board device tree source
*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
*/
/dts-v1/;
#include "skeleton64.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Qualcomm Technologies, Inc. Dragonboard 410c";
compatible = "qcom,dragonboard", "qcom,apq8016-sbc";
qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>;
qcom,board-id = <0x10018 0x0>;
#address-cells = <0x2>;
#size-cells = <0x2>;
aliases {
usb0 = "/soc/ehci@78d9000";
};
memory {
device_type = "memory";
reg = <0 0x80000000 0 0x3da00000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
smem_mem: smem_region@86300000 {
reg = <0x0 0x86300000 0x0 0x100000>;
no-map;
};
};
chosen {
stdout-path = "/soc/serial@78b0000";
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
};
soc {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0x0 0x0 0x0 0xffffffff>;
compatible = "simple-bus";
rpm_msg_ram: memory@60000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x60000 0x8000>;
};
soc_gpios: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x400000>;
gpio-controller;
gpio-count = <122>;
gpio-bank-name="soc";
#gpio-cells = <2>;
blsp1_uart: uart {
function = "blsp1_uart";
pins = "GPIO_4", "GPIO_5";
drive-strength = <8>;
bias-disable;
};
};
clkc: qcom,gcc@1800000 {
compatible = "qcom,gcc-apq8016";
reg = <0x1800000 0x80000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
};
serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4";
reg = <0x78b0000 0x200>;
clock = <&clkc 4>;
pinctrl-names = "uart";
pinctrl-0 = <&blsp1_uart>;
};
ehci@78d9000 {
compatible = "qcom,ehci-host";
reg = <0x78d9000 0x400>;
phys = <&ehci_phy>;
};
ehci_phy: ehci_phy@78d9000 {
compatible = "qcom,apq8016-usbphy";
reg = <0x78d9000 0x400>;
#phy-cells = <0>;
};
sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7824900 0x11c 0x7824000 0x800>;
bus-width = <0x8>;
index = <0x0>;
non-removable;
clock = <&clkc 0>;
clock-frequency = <100000000>;
};
sdhci@07864000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7864900 0x11c 0x7864000 0x800>;
index = <0x1>;
bus-width = <0x4>;
clock = <&clkc 1>;
clock-frequency = <200000000>;
cd-gpios = <&soc_gpios 38 GPIO_ACTIVE_LOW>;
};
wcnss {
bt {
compatible="qcom,wcnss-bt";
};
wifi {
compatible="qcom,wcnss-wlan";
};
};
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0200f000 0x001000>,
<0x02400000 0x400000>,
<0x02c00000 0x400000>,
<0x03800000 0x200000>,
<0x0200a000 0x002100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
#address-cells = <0x1>;
#size-cells = <0x1>;
pmic0: pm8916@0 {
compatible = "qcom,spmi-pmic";
reg = <0x0 0x1>;
#address-cells = <0x1>;
#size-cells = <0x1>;
pm8916_pon: pm8916_pon@800 {
compatible = "qcom,pm8916-pwrkey";
reg = <0x800 0x96>;
#gpio-cells = <2>;
gpio-controller;
};
pm8916_gpios: pm8916_gpios@c000 {
compatible = "qcom,pm8916-gpio";
reg = <0xc000 0x400>;
gpio-controller;
gpio-count = <4>;
#gpio-cells = <2>;
gpio-bank-name="pmic";
};
};
pmic1: pm8916@1 {
compatible = "qcom,spmi-pmic";
reg = <0x1 0x1>;
};
};
};
leds {
compatible = "gpio-leds";
user1 {
label = "green:user1";
gpios = <&soc_gpios 21 0>;
};
user2 {
label = "green:user2";
gpios = <&soc_gpios 120 0>;
};
user3 {
label = "green:user3";
gpios = <&pm8916_gpios 0 0>;
};
user4 {
label = "green:user4";
gpios = <&pm8916_gpios 1 0>;
};
};
};
#include "dragonboard410c-uboot.dtsi"