blob: 6d4b35ea96615460a1d5dd3214345b98c3f2c37b [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
*
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
*
* Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "sama5d27_wlsom1.dtsi"
/ {
model = "Microchip SAMA5D27 WLSOM1 EK";
compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d2", "atmel,sama5";
chosen {
stdout-path = &uart0;
};
onewire_tm: onewire {
gpios = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_onewire_tm_default>;
status = "okay";
w1_eeprom: w1_eeprom@0 {
compatible = "maxim,ds24b33";
status = "okay";
};
};
ahb {
sdmmc0: sdio-host@a0000000 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
status = "okay";
};
apb {
hlcdc: hlcdc@f0000000 {
atmel,vl-bpix = <4>;
atmel,output-mode = <24>;
atmel,guard-time = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
status = "okay";
display-timings {
800x480 {
clock-frequency = <33300000>;
xres = <800>;
yres = <480>;
hactive = <800>;
vactive = <480>;
hsync-len = <64>;
hfront-porch = <1>;
hback-porch = <64>;
vfront-porch = <1>;
vback-porch = <22>;
vsync-len = <23>;
};
};
};
qspi1: spi@f0024000 {
status = "okay";
};
macb0: ethernet@f8008000 {
status = "okay";
};
uart0: serial@f801c000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0_default>;
status = "okay";
};
pioA: pinctrl@fc038000 {
pinctrl_lcd_base: pinctrl_lcd_base {
pinmux = <PIN_PC30__LCDVSYNC>,
<PIN_PC31__LCDHSYNC>,
<PIN_PD1__LCDDEN>,
<PIN_PD0__LCDPCK>;
bias-disable;
};
pinctrl_lcd_pwm: pinctrl_lcd_pwm {
pinmux = <PIN_PC28__LCDPWM>;
bias-disable;
};
pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
pinmux = <PIN_PC10__LCDDAT2>,
<PIN_PC11__LCDDAT3>,
<PIN_PC12__LCDDAT4>,
<PIN_PC13__LCDDAT5>,
<PIN_PC14__LCDDAT6>,
<PIN_PC15__LCDDAT7>,
<PIN_PC16__LCDDAT10>,
<PIN_PC17__LCDDAT11>,
<PIN_PC18__LCDDAT12>,
<PIN_PC19__LCDDAT13>,
<PIN_PC20__LCDDAT14>,
<PIN_PC21__LCDDAT15>,
<PIN_PC22__LCDDAT18>,
<PIN_PC23__LCDDAT19>,
<PIN_PC24__LCDDAT20>,
<PIN_PC25__LCDDAT21>,
<PIN_PC26__LCDDAT22>,
<PIN_PC27__LCDDAT23>;
bias-disable;
};
pinctrl_sdmmc0_default: sdmmc0_default {
cmd_data {
pinmux = <PIN_PA1__SDMMC0_CMD>,
<PIN_PA2__SDMMC0_DAT0>,
<PIN_PA3__SDMMC0_DAT1>,
<PIN_PA4__SDMMC0_DAT2>,
<PIN_PA5__SDMMC0_DAT3>;
bias-disable;
};
ck_cd_vddsel {
pinmux = <PIN_PA0__SDMMC0_CK>,
<PIN_PA11__SDMMC0_VDDSEL>,
<PIN_PA12__SDMMC0_WP>,
<PIN_PA13__SDMMC0_CD>;
bias-disable;
};
};
pinctrl_uart0_default: uart0_default {
pinmux = <PIN_PB26__URXD0>,
<PIN_PB27__UTXD0>;
bias-disable;
};
pinctrl_onewire_tm_default: onewire_tm_default {
pinmux = <PIN_PC9__GPIO>;
bias-pull-up;
};
pinctrl_usb_default: usb_default {
pinmux = <PIN_PA10__GPIO>;
bias-disable;
};
pinctrl_usba_vbus: usba_vbus {
pinmux = <PIN_PA16__GPIO>;
bias-disable;
};
};
};
};
};
&usb1 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioA PIN_PA10 GPIO_ACTIVE_HIGH
0
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};
&usb2 {
status = "okay";
};