blob: b3592b22a0c1684464a408a2b58440c4cb982284 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
#include "dra72x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
#include "dra7-mmc-iodelay.dtsi"
#include "dra72x-mmc-iodelay.dtsi"
/ {
model = "TI AM5718 IDK";
compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>;
};
leds {
compatible = "gpio-leds";
cpu0-led {
label = "status0:red:cpu0";
gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "cpu0";
};
usr0-led {
label = "status0:green:usr";
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
heartbeat-led {
label = "status0:blue:heartbeat";
gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "heartbeat";
};
usr1-led {
label = "status1:red:usr";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
usr2-led {
label = "status1:green:usr";
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
mmc0-led {
label = "status1:blue:mmc0";
gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
};
};
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&extcon_usb2 {
id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
status = "okay";
};
};
&pcie1_rc {
status = "okay";
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&pcie1_ep {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&mmc1 {
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
};
&mmc2 {
pinctrl-names = "default", "hs", "ddr_1_8v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};