blob: d92bad97b71e9c2964ca969a1b54704e3c8bfca4 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Atmel Corporation
* Wenyou.Yang <wenyou.yang@atmel.com>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <malloc.h>
#include <sdhci.h>
#include <asm/arch/clk.h>
#include <asm/global_data.h>
#define ATMEL_SDHC_MIN_FREQ 400000
#define ATMEL_SDHC_GCK_RATE 240000000
#define ATMEL_SDHC_MC1R 0x204
#define ATMEL_SDHC_MC1R_FCD 0x80
#ifndef CONFIG_DM_MMC
int atmel_sdhci_init(void *regbase, u32 id)
{
struct sdhci_host *host;
u32 max_clk, min_clk = ATMEL_SDHC_MIN_FREQ;
host = (struct sdhci_host *)calloc(1, sizeof(struct sdhci_host));
if (!host) {
printf("%s: sdhci_host calloc failed\n", __func__);
return -ENOMEM;
}
host->name = "atmel_sdhci";
host->ioaddr = regbase;
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
max_clk = at91_get_periph_generated_clk(id);
if (!max_clk) {
printf("%s: Failed to get the proper clock\n", __func__);
free(host);
return -ENODEV;
}
host->max_clk = max_clk;
add_sdhci(host, 0, min_clk);
return 0;
}
#else
DECLARE_GLOBAL_DATA_PTR;
struct atmel_sdhci_plat {
struct mmc_config cfg;
struct mmc mmc;
};
static void atmel_sdhci_config_fcd(struct sdhci_host *host)
{
u8 mc1r;
/* If nonremovable, assume that the card is always present.
*
* WA: SAMA5D2 doesn't drive CMD if using CD GPIO line.
*/
if ((host->mmc->cfg->host_caps & MMC_CAP_NONREMOVABLE)
#if CONFIG_IS_ENABLED(DM_GPIO)
|| dm_gpio_get_value(&host->cd_gpio) >= 0
#endif
) {
sdhci_readb(host, ATMEL_SDHC_MC1R);
mc1r |= ATMEL_SDHC_MC1R_FCD;
sdhci_writeb(host, mc1r, ATMEL_SDHC_MC1R);
}
}
static int atmel_sdhci_deferred_probe(struct sdhci_host *host)
{
struct udevice *dev = host->mmc->dev;
int ret;
ret = sdhci_probe(dev);
if (ret)
return ret;
atmel_sdhci_config_fcd(host);
return 0;
}
static const struct sdhci_ops atmel_sdhci_ops = {
.deferred_probe = atmel_sdhci_deferred_probe,
};
static int atmel_sdhci_probe(struct udevice *dev)
{
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct atmel_sdhci_plat *plat = dev_get_plat(dev);
struct sdhci_host *host = dev_get_priv(dev);
u32 max_clk;
struct clk clk;
int ret;
ret = clk_get_by_index(dev, 0, &clk);
if (ret)
return ret;
ret = clk_enable(&clk);
if (ret)
return ret;
host->name = dev->name;
host->ioaddr = dev_read_addr_ptr(dev);
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
host->bus_width = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"bus-width", 4);
ret = clk_get_by_index(dev, 1, &clk);
if (ret)
return ret;
clk_set_rate(&clk, ATMEL_SDHC_GCK_RATE);
max_clk = clk_get_rate(&clk);
if (!max_clk)
return -EINVAL;
ret = clk_enable(&clk);
/* return error only if the clock really has a clock enable func */
if (ret && ret != -ENOSYS)
return ret;
ret = mmc_of_parse(dev, &plat->cfg);
if (ret)
return ret;
host->max_clk = max_clk;
host->mmc = &plat->mmc;
host->mmc->dev = dev;
ret = sdhci_setup_cfg(&plat->cfg, host, 0, ATMEL_SDHC_MIN_FREQ);
if (ret)
return ret;
host->mmc->priv = host;
host->ops = &atmel_sdhci_ops;
upriv->mmc = host->mmc;
ret = sdhci_probe(dev);
if (ret)
return ret;
atmel_sdhci_config_fcd(host);
return 0;
}
static int atmel_sdhci_bind(struct udevice *dev)
{
struct atmel_sdhci_plat *plat = dev_get_plat(dev);
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
}
static const struct udevice_id atmel_sdhci_ids[] = {
{ .compatible = "atmel,sama5d2-sdhci" },
{ .compatible = "microchip,sam9x60-sdhci" },
{ .compatible = "microchip,sama7g5-sdhci" },
{ }
};
U_BOOT_DRIVER(atmel_sdhci_drv) = {
.name = "atmel_sdhci",
.id = UCLASS_MMC,
.of_match = atmel_sdhci_ids,
.ops = &sdhci_ops,
.bind = atmel_sdhci_bind,
.probe = atmel_sdhci_probe,
.priv_auto = sizeof(struct sdhci_host),
.plat_auto = sizeof(struct atmel_sdhci_plat),
};
#endif