blob: 2656f5fc5ecf3ad2d408028f00b203930f700fa6 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* (C) Copyright 2015 - 2016, Xilinx, Inc,
* Michal Simek <michal.simek@amd.com>
* Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
#include <console.h>
#include <common.h>
#include <compiler.h>
#include <cpu_func.h>
#include <fpga.h>
#include <log.h>
#include <zynqmppl.h>
#include <zynqmp_firmware.h>
#include <asm/cache.h>
#include <linux/bitops.h>
#include <linux/sizes.h>
#include <asm/arch/sys_proto.h>
#include <memalign.h>
#define DUMMY_WORD 0xffffffff
/* Xilinx binary format header */
static const u32 bin_format[] = {
DUMMY_WORD, /* Dummy words */
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
DUMMY_WORD,
0x000000bb, /* Sync word */
0x11220044, /* Sync word */
DUMMY_WORD,
DUMMY_WORD,
0xaa995566, /* Sync word */
};
#define SWAP_NO 1
#define SWAP_DONE 2
/*
* Load the whole word from unaligned buffer
* Keep in your mind that it is byte loading on little-endian system
*/
static u32 load_word(const void *buf, u32 swap)
{
u32 word = 0;
u8 *bitc = (u8 *)buf;
int p;
if (swap == SWAP_NO) {
for (p = 0; p < 4; p++) {
word <<= 8;
word |= bitc[p];
}
} else {
for (p = 3; p >= 0; p--) {
word <<= 8;
word |= bitc[p];
}
}
return word;
}
static u32 check_header(const void *buf)
{
u32 i, pattern;
int swap = SWAP_NO;
u32 *test = (u32 *)buf;
debug("%s: Let's check bitstream header\n", __func__);
/* Checking that passing bin is not a bitstream */
for (i = 0; i < ARRAY_SIZE(bin_format); i++) {
pattern = load_word(&test[i], swap);
/*
* Bitstreams in binary format are swapped
* compare to regular bistream.
* Do not swap dummy word but if swap is done assume
* that parsing buffer is binary format
*/
if ((__swab32(pattern) != DUMMY_WORD) &&
(__swab32(pattern) == bin_format[i])) {
swap = SWAP_DONE;
debug("%s: data swapped - let's swap\n", __func__);
}
debug("%s: %d/%px: pattern %x/%x bin_format\n", __func__, i,
&test[i], pattern, bin_format[i]);
}
debug("%s: Found bitstream header at %px %s swapinng\n", __func__,
buf, swap == SWAP_NO ? "without" : "with");
return swap;
}
static void *check_data(u8 *buf, size_t bsize, u32 *swap)
{
u32 word, p = 0; /* possition */
/* Because buf doesn't need to be aligned let's read it by chars */
for (p = 0; p < bsize; p++) {
word = load_word(&buf[p], SWAP_NO);
debug("%s: word %x %x/%px\n", __func__, word, p, &buf[p]);
/* Find the first bitstream dummy word */
if (word == DUMMY_WORD) {
debug("%s: Found dummy word at position %x/%px\n",
__func__, p, &buf[p]);
*swap = check_header(&buf[p]);
if (*swap) {
/* FIXME add full bitstream checking here */
return &buf[p];
}
}
/* Loop can be huge - support CTRL + C */
if (ctrlc())
return NULL;
}
return NULL;
}
static ulong zynqmp_align_dma_buffer(u32 *buf, u32 len, u32 swap)
{
u32 *new_buf;
u32 i;
if ((ulong)buf != ALIGN((ulong)buf, ARCH_DMA_MINALIGN)) {
new_buf = (u32 *)ALIGN((ulong)buf, ARCH_DMA_MINALIGN);
/*
* This might be dangerous but permits to flash if
* ARCH_DMA_MINALIGN is greater than header size
*/
if (new_buf > (u32 *)buf) {
debug("%s: Aligned buffer is after buffer start\n",
__func__);
new_buf -= ARCH_DMA_MINALIGN;
}
printf("%s: Align buffer at %px to %px(swap %d)\n", __func__,
buf, new_buf, swap);
for (i = 0; i < (len/4); i++)
new_buf[i] = load_word(&buf[i], swap);
buf = new_buf;
} else if ((swap != SWAP_DONE) &&
(zynqmp_firmware_version() <= PMUFW_V1_0)) {
/* For bitstream which are aligned */
new_buf = buf;
printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__,
swap);
for (i = 0; i < (len/4); i++)
new_buf[i] = load_word(&buf[i], swap);
}
return (ulong)buf;
}
static int zynqmp_validate_bitstream(xilinx_desc *desc, const void *buf,
size_t bsize, u32 blocksize, u32 *swap)
{
ulong *buf_start;
ulong diff;
buf_start = check_data((u8 *)buf, blocksize, swap);
if (!buf_start)
return FPGA_FAIL;
/* Check if data is postpone from start */
diff = (ulong)buf_start - (ulong)buf;
if (diff) {
printf("%s: Bitstream is not validated yet (diff %lx)\n",
__func__, diff);
return FPGA_FAIL;
}
if ((ulong)buf < SZ_1M) {
printf("%s: Bitstream has to be placed up to 1MB (%px)\n",
__func__, buf);
return FPGA_FAIL;
}
return 0;
}
#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE)
static int zynqmp_check_compatible(xilinx_desc *desc, int flags)
{
/*
* If no flags set, the image may be legacy, but we need to
* signal caller this situation with specific error code.
*/
if (!flags)
return -ENODATA;
/* For legacy bitstream images no need for other methods exist */
if ((flags & desc->flags) && flags == FPGA_LEGACY)
return 0;
/*
* Other images are handled in secure callback loads(). Check
* callback existence besides image type support.
*/
if (desc->operations->loads && (flags & desc->flags))
return 0;
return -ENODEV;
}
#endif
static int zynqmp_load(xilinx_desc *desc, const void *buf, size_t bsize,
bitstream_type bstype, int flags)
{
ALLOC_CACHE_ALIGN_BUFFER(u32, bsizeptr, 1);
u32 swap = 0;
ulong bin_buf;
int ret;
u32 buf_lo, buf_hi;
u32 bsize_req = (u32)bsize;
u32 ret_payload[PAYLOAD_ARG_CNT];
#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE)
struct fpga_secure_info info = { 0 };
ret = zynqmp_check_compatible(desc, flags);
if (ret) {
if (ret != -ENODATA) {
puts("Missing loads() operation or unsupported bitstream type\n");
return FPGA_FAIL;
}
/* If flags is not set, the image treats as legacy */
flags = FPGA_LEGACY;
}
switch (flags) {
case FPGA_LEGACY:
break; /* Handle the legacy image later in this function */
#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE)
case FPGA_XILINX_ZYNQMP_DDRAUTH:
/* DDR authentication */
info.authflag = ZYNQMP_FPGA_AUTH_DDR;
info.encflag = FPGA_NO_ENC_OR_NO_AUTH;
return desc->operations->loads(desc, buf, bsize, &info);
case FPGA_XILINX_ZYNQMP_ENC:
/* Encryption using device key */
info.authflag = FPGA_NO_ENC_OR_NO_AUTH;
info.encflag = FPGA_ENC_DEV_KEY;
return desc->operations->loads(desc, buf, bsize, &info);
#endif
default:
printf("Unsupported bitstream type %d\n", flags);
return FPGA_FAIL;
}
#endif
if (zynqmp_firmware_version() <= PMUFW_V1_0) {
puts("WARN: PMUFW v1.0 or less is detected\n");
puts("WARN: Not all bitstream formats are supported\n");
puts("WARN: Please upgrade PMUFW\n");
if (zynqmp_validate_bitstream(desc, buf, bsize, bsize, &swap))
return FPGA_FAIL;
bsizeptr = (u32 *)&bsize;
flush_dcache_range((ulong)bsizeptr,
(ulong)bsizeptr + sizeof(size_t));
bsize_req = (u32)(uintptr_t)bsizeptr;
bstype |= BIT(ZYNQMP_FPGA_BIT_NS);
} else {
bstype = 0;
}
bin_buf = zynqmp_align_dma_buffer((u32 *)buf, bsize, swap);
flush_dcache_range(bin_buf, bin_buf + bsize);
buf_lo = (u32)bin_buf;
buf_hi = upper_32_bits(bin_buf);
ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo, buf_hi,
bsize_req, bstype, ret_payload);
if (ret)
printf("PL FPGA LOAD failed with err: 0x%08x\n", ret);
return ret;
}
#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE)
static int zynqmp_loads(xilinx_desc *desc, const void *buf, size_t bsize,
struct fpga_secure_info *fpga_sec_info)
{
int ret;
u32 buf_lo, buf_hi;
u32 ret_payload[PAYLOAD_ARG_CNT];
u8 flag = 0;
flush_dcache_range((ulong)buf, (ulong)buf +
ALIGN(bsize, CONFIG_SYS_CACHELINE_SIZE));
if (!fpga_sec_info->encflag)
flag |= BIT(ZYNQMP_FPGA_BIT_ENC_DEV_KEY);
if (fpga_sec_info->userkey_addr &&
fpga_sec_info->encflag == FPGA_ENC_USR_KEY) {
flush_dcache_range((ulong)fpga_sec_info->userkey_addr,
(ulong)fpga_sec_info->userkey_addr +
ALIGN(KEY_PTR_LEN,
CONFIG_SYS_CACHELINE_SIZE));
flag |= BIT(ZYNQMP_FPGA_BIT_ENC_USR_KEY);
}
if (!fpga_sec_info->authflag)
flag |= BIT(ZYNQMP_FPGA_BIT_AUTH_OCM);
if (fpga_sec_info->authflag == ZYNQMP_FPGA_AUTH_DDR)
flag |= BIT(ZYNQMP_FPGA_BIT_AUTH_DDR);
buf_lo = lower_32_bits((ulong)buf);
buf_hi = upper_32_bits((ulong)buf);
if ((u32)(uintptr_t)fpga_sec_info->userkey_addr)
ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo,
buf_hi,
(u32)(uintptr_t)fpga_sec_info->userkey_addr,
flag, ret_payload);
else
ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo,
buf_hi, (u32)bsize,
flag, ret_payload);
if (ret)
puts("PL FPGA LOAD fail\n");
else
puts("Bitstream successfully loaded\n");
return ret;
}
#endif
static int zynqmp_pcap_info(xilinx_desc *desc)
{
int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
ret = xilinx_pm_request(PM_FPGA_GET_STATUS, 0, 0, 0,
0, ret_payload);
if (!ret)
printf("PCAP status\t0x%x\n", ret_payload[1]);
return ret;
}
static int __maybe_unused zynqmp_str2flag(xilinx_desc *desc, const char *str)
{
if (!strncmp(str, "u-boot,fpga-legacy", 18))
return FPGA_LEGACY;
#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE)
if (!strncmp(str, "u-boot,zynqmp-fpga-ddrauth", 26))
return FPGA_XILINX_ZYNQMP_DDRAUTH;
if (!strncmp(str, "u-boot,zynqmp-fpga-enc", 22))
return FPGA_XILINX_ZYNQMP_ENC;
#endif
return 0;
}
struct xilinx_fpga_op zynqmp_op = {
.load = zynqmp_load,
.info = zynqmp_pcap_info,
#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE)
.loads = zynqmp_loads,
.str2flag = zynqmp_str2flag,
#endif
};