blob: fda751aeffb8e5d39a93f3295f4d3523e4827f18 [file] [log] [blame]
.. SPDX-License-Identifier: GPL-2.0+
phyCORE-i.MX 8M Plus
====================
The phyCORE-i.MX 8M Plus with 2GB of main memory is supported.
Quick Start
-----------
- Build the ARM Trusted firmware binary
- Get ddr firmware
- Build U-Boot
- Boot
Build the ARM Trusted firmware binary
-------------------------------------
.. code-block:: bash
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
$ cd trusted-firmware-a
$ export CROSS_COMPILE=aarch64-linux-gnu
$ export IMX_BOOT_UART_BASE=0x30860000
$ make PLAT=imx8mp bl31
Get the ddr firmware
--------------------
.. code-block:: bash
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin
$ chmod +x firmware-imx-8.19.bin
$ ./firmware-imx-8.19.bin
Build U-Boot for SD card
------------------------
Copy binaries
^^^^^^^^^^^^^
.. code-block:: bash
$ cp <TF-A dir>/build/imx8mp/release/bl31.bin .
$ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin .
Build U-Boot
^^^^^^^^^^^^
.. code-block:: bash
$ make phycore-imx8mp_defconfig
$ make flash.bin
Flash SD card
^^^^^^^^^^^^^
.. code-block:: bash
$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=sync