blob: b0b0f44db2c4f6d083fe180281686c39a306a56b [file] [log] [blame]
.. SPDX-License-Identifier: GPL-2.0+
Kontron Electronics SL i.MX6UL/ULL SoM
======================================
The Kontron SoM-Line i.MX6UL/ULL (N6x1x) by Kontron Electronics GmbH is a SoM module
with either an i.MX6UL or i.MX6ULL SoC, 256/512 MB DDR3 RAM, SPI NOR, SPI NAND and Ethernet PHY.
The matching evaluation boards (Board-Line) have two Ethernet ports, USB 2.0,
RGB, SD card, CAN, RS485, RS232 and much more.
Quick Start
-----------
- Build U-Boot
- Boot
Build U-Boot
^^^^^^^^^^^^
.. code-block:: bash
$ make kontron-sl-mx6ul_defconfig
$ make
Burn the flash.bin to SD card at an offset of 1 KiB:
.. code-block:: bash
$ dd if=flash.bin of=/dev/sd[x] bs=1K seek=1 conv=notrunc
Boot
^^^^
Put the SD card in the slot on the board and apply power.
Further Information
-------------------
The bootloader configuration is setup to be used with kernel FIT images. Legacy
images might not be working out of the box.
Please see https://docs.kontron-electronics.de for further vendor documentation.