blob: 8a8296e8630d12d84f8bfbb21cae6236582db4dc [file] [log] [blame]
.. SPDX-License-Identifier: GPL-2.0+
U-Boot for Beelink GS-King-X (S922X)
====================================
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an
S922X-H chip and the following specifications:
- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- S/PDIF optical output
- 2x ESS9018 audio DACs
- 4x Ricor RT6862 audio amps
- Analogue headphone output
- 1x USB 2.0 OTG port
- 3x USB 3.0 ports
- IR receiver
- 1x micro SD card slot (internal)
- USB SATA controller with 2x 3.5" drive bays
- 1x Power on/off button
Beelink do not provide public schematics, but have been willing to share them with known
distro developers to assist with development.
U-Boot Compilation
------------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-none-elf-
$ make beelink-gsking-x_defconfig
$ make
U-Boot Signing with Pre-Built FIP repo
--------------------------------------
.. code-block:: bash
$ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
$ cd amlogic-boot-fip
$ mkdir my-output-dir
$ ./build-fip.sh beelink-s922x /path/to/u-boot/u-boot.bin my-output-dir
U-Boot Manual Signing
---------------------
Beelink released an Amlogic "SDK" dump in their forums but the U-Boot sources included
result in 2GB RAM detected. The following FIPs were generated with newer sources and
detect 4GB RAM: https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
.. code-block:: bash
$ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
$ unzip master.zip
$ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
Go back to the mainline U-Boot source tree then:
.. code-block:: bash
$ mkdir fip
$ cp $FIPDIR/* fip/
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
fip/bl30.bin \
fip/zero_tmp \
fip/bl30_zero.bin \
fip/bl301.bin \
fip/bl301_zero.bin \
fip/bl30_new.bin \
bl30
$ sh fip/blx_fix.sh \
fip/bl2.bin \
fip/zero_tmp \
fip/bl2_zero.bin \
fip/acs.bin \
fip/bl21_zero.bin \
fip/bl2_new.bin \
bl2
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
--output fip/bl30_new.bin.g12a.enc \
--level v3
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
--output fip/bl30_new.bin.enc \
--level v3 --type bl30
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
--output fip/bl31.img.enc \
--level v3 --type bl31
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
--output fip/bl33.bin.enc \
--level v3 --type bl33
$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
--output fip/bl2.n.bin.sig
$ fip/aml_encrypt_g12b --bootmk \
--output fip/u-boot.bin \
--bl2 fip/bl2.n.bin.sig \
--bl30 fip/bl30_new.bin.enc \
--bl31 fip/bl31.img.enc \
--bl33 fip/bl33.bin.enc \
--ddrfw1 fip/ddr4_1d.fw \
--ddrfw2 fip/ddr4_2d.fw \
--ddrfw3 fip/ddr3_1d.fw \
--ddrfw4 fip/piei.fw \
--ddrfw5 fip/lpddr4_1d.fw \
--ddrfw6 fip/lpddr4_2d.fw \
--ddrfw7 fip/diag_lpddr4.fw \
--ddrfw8 fip/aml_ddr.fw \
--level v3
Then write U-Boot to SD or eMMC with:
.. code-block:: bash
$ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440