blob: ac52c5e6dafab5c1af838830d13d0e5383198f85 [file] [log] [blame]
menu "RISC-V architecture"
depends on RISCV
config SYS_ARCH
default "riscv"
choice
prompt "Target select"
optional
config TARGET_ANDES_AE350
bool "Support Andes ae350"
config TARGET_MICROCHIP_ICICLE
bool "Support Microchip PolarFire-SoC Icicle Board"
config TARGET_MILKV_DUO
bool "Support Milk-v Duo Board"
config TARGET_OPENPITON_RISCV64
bool "Support RISC-V cores on OpenPiton SoC"
config TARGET_QEMU_VIRT
bool "Support QEMU Virt Board"
config TARGET_SIFIVE_UNLEASHED
bool "Support SiFive Unleashed Board"
config TARGET_SIFIVE_UNMATCHED
bool "Support SiFive Unmatched Board"
select SYS_CACHE_SHIFT_6
config TARGET_SIPEED_MAIX
bool "Support Sipeed Maix Board"
select SYS_CACHE_SHIFT_6
config TARGET_STARFIVE_VISIONFIVE2
bool "Support StarFive VisionFive2 Board"
select BOARD_LATE_INIT
config TARGET_TH1520_LPI4A
bool "Support Sipeed's TH1520 Lichee PI 4A Board"
select SYS_CACHE_SHIFT_6
config TARGET_XILINX_MBV
bool "Support AMD/Xilinx MicroBlaze V"
endchoice
config SYS_ICACHE_OFF
bool "Do not enable icache"
help
Do not enable instruction cache in U-Boot.
config SPL_SYS_ICACHE_OFF
bool "Do not enable icache in SPL"
depends on SPL
default SYS_ICACHE_OFF
help
Do not enable instruction cache in SPL.
config SYS_DCACHE_OFF
bool "Do not enable dcache"
help
Do not enable data cache in U-Boot.
config SPL_SYS_DCACHE_OFF
bool "Do not enable dcache in SPL"
depends on SPL
default SYS_DCACHE_OFF
help
Do not enable data cache in SPL.
config SPL_ZERO_MEM_BEFORE_USE
bool "Zero memory before use"
depends on SPL
help
Zero stack/GD/malloc area in SPL before using them, this is needed for
Sifive core devices that uses L2 cache to store SPL.
# board-specific options below
source "board/AndesTech/ae350/Kconfig"
source "board/emulation/qemu-riscv/Kconfig"
source "board/microchip/mpfs_icicle/Kconfig"
source "board/openpiton/riscv64/Kconfig"
source "board/sifive/unleashed/Kconfig"
source "board/sifive/unmatched/Kconfig"
source "board/sipeed/maix/Kconfig"
source "board/sophgo/milkv_duo/Kconfig"
source "board/starfive/visionfive2/Kconfig"
source "board/thead/th1520_lpi4a/Kconfig"
source "board/xilinx/mbv/Kconfig"
# platform-specific options below
source "arch/riscv/cpu/andesv5/Kconfig"
source "arch/riscv/cpu/fu540/Kconfig"
source "arch/riscv/cpu/fu740/Kconfig"
source "arch/riscv/cpu/generic/Kconfig"
source "arch/riscv/cpu/jh7110/Kconfig"
# architecture-specific options below
choice
prompt "Base ISA"
default ARCH_RV32I
config ARCH_RV32I
bool "RV32I"
select 32BIT
help
Choose this option to target the RV32I base integer instruction set.
config ARCH_RV64I
bool "RV64I"
select 64BIT
select PHYS_64BIT
help
Choose this option to target the RV64I base integer instruction set.
endchoice
choice
prompt "Code Model"
default CMODEL_MEDLOW
config CMODEL_MEDLOW
bool "medium low code model"
help
U-Boot and its statically defined symbols must lie within a single 2 GiB
address range and must lie between absolute addresses -2 GiB and +2 GiB.
config CMODEL_MEDANY
bool "medium any code model"
help
U-Boot and its statically defined symbols must be within any single 2 GiB
address range.
endchoice
choice
prompt "Run Mode"
default RISCV_MMODE
config RISCV_MMODE
bool "Machine"
help
Choose this option to build U-Boot for RISC-V M-Mode.
config RISCV_SMODE
bool "Supervisor"
imply DEBUG_UART
help
Choose this option to build U-Boot for RISC-V S-Mode.
endchoice
choice
prompt "SPL Run Mode"
default SPL_RISCV_MMODE
depends on SPL
config SPL_RISCV_MMODE
bool "Machine"
help
Choose this option to build U-Boot SPL for RISC-V M-Mode.
config SPL_RISCV_SMODE
bool "Supervisor"
help
Choose this option to build U-Boot SPL for RISC-V S-Mode.
endchoice
config RISCV_ISA_C
bool "Emit compressed instructions"
default y
help
Adds "C" to the ISA subsets that the toolchain is allowed to emit
when building U-Boot, which results in compressed instructions in the
U-Boot binary.
config RISCV_ISA_F
bool "Standard extension for Single-Precision Floating Point"
default y
help
Adds "F" to the ISA string passed to the compiler.
config RISCV_ISA_D
bool "Standard extension for Double-Precision Floating Point"
depends on RISCV_ISA_F
default y
help
Adds "D" to the ISA string passed to the compiler and changes the
riscv32 ABI from ilp32 to ilp32d and the riscv64 ABI from lp64 to
lp64d.
config RISCV_ISA_ZBB
bool "Zbb extension support for bit manipulation instructions"
help
Adds ZBB extension (basic bit manipulation) to the ISA subsets
that the toolchain is allowed to emit when building U-Boot.
The Zbb extension provides instructions to accelerate a number
of bit-specific operations (count bit population, sign extending,
bitrotation, etc) and enables optimized string routines.
menu "Use assembly optimized implementation of string routines"
config USE_ARCH_STRLEN
bool "Use an assembly optimized implementation of strlen"
default y
depends on RISCV_ISA_ZBB
help
Enable the generation of an optimized version of strlen using
Zbb extension.
config SPL_USE_ARCH_STRLEN
bool "Use an assembly optimized implementation of strlen for SPL"
default y if USE_ARCH_STRLEN
depends on RISCV_ISA_ZBB
depends on SPL
help
Enable the generation of an optimized version of strlen using
Zbb extension.
config TPL_USE_ARCH_STRLEN
bool "Use an assembly optimized implementation of strlen for TPL"
default y if USE_ARCH_STRLEN
depends on RISCV_ISA_ZBB
depends on TPL
help
Enable the generation of an optimized version of strlen using
Zbb extension.
config USE_ARCH_STRCMP
bool "Use an assembly optimized implementation of strcmp"
default y
depends on RISCV_ISA_ZBB
help
Enable the generation of an optimized version of strcmp using
Zbb extension.
config SPL_USE_ARCH_STRCMP
bool "Use an assembly optimized implementation of strcmp for SPL"
default y if USE_ARCH_STRCMP
depends on RISCV_ISA_ZBB
depends on SPL
help
Enable the generation of an optimized version of strcmp using
Zbb extension.
config TPL_USE_ARCH_STRCMP
bool "Use an assembly optimized implementation of strcmp for TPL"
default y if USE_ARCH_STRCMP
depends on RISCV_ISA_ZBB
depends on TPL
help
Enable the generation of an optimized version of strcmp using
Zbb extension.
config USE_ARCH_STRNCMP
bool "Use an assembly optimized implementation of strncmp"
default y
depends on RISCV_ISA_ZBB
help
Enable the generation of an optimized version of strncmp using
Zbb extension.
config SPL_USE_ARCH_STRNCMP
bool "Use an assembly optimized implementation of strncmp for SPL"
default y if USE_ARCH_STRNCMP
depends on RISCV_ISA_ZBB
depends on SPL
help
Enable the generation of an optimized version of strncmp using
Zbb extension.
config TPL_USE_ARCH_STRNCMP
bool "Use an assembly optimized implementation of strncmp for TPL"
default y if USE_ARCH_STRNCMP
depends on RISCV_ISA_ZBB
depends on TPL
help
Enable the generation of an optimized version of strncmp using
Zbb extension.
endmenu
config RISCV_ISA_A
def_bool y
config 32BIT
bool
config 64BIT
bool
config DMA_ADDR_T_64BIT
bool
default y if 64BIT
config RISCV_ACLINT
bool
depends on RISCV_MMODE
select REGMAP
select SYSCON
help
The RISC-V ACLINT block holds memory-mapped control and status registers
associated with software and timer interrupts.
config SPL_RISCV_ACLINT
bool
depends on SPL_RISCV_MMODE
select SPL_REGMAP
select SPL_SYSCON
help
The RISC-V ACLINT block holds memory-mapped control and status registers
associated with software and timer interrupts.
config SIFIVE_CACHE
bool
help
This enables the operations to configure SiFive cache
config ANDES_PLICSW
bool
depends on RISCV_MMODE || SPL_RISCV_MMODE
select REGMAP
select SYSCON
select SPL_REGMAP if SPL
select SPL_SYSCON if SPL
help
The Andes PLICSW block holds memory-mapped claim and pending
registers associated with software interrupt.
config SMP
bool "Symmetric Multi-Processing"
depends on SBI_V01 || !RISCV_SMODE
help
This enables support for systems with more than one CPU. If
you say N here, U-Boot will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor
machine. If you say Y here, U-Boot will run on many, but not
all, single processor machines.
config SPL_SMP
bool "Symmetric Multi-Processing in SPL"
depends on SPL && SPL_RISCV_MMODE
default y
help
This enables support for systems with more than one CPU in SPL.
If you say N here, U-Boot SPL will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor
machine. If you say Y here, U-Boot SPL will run on many, but not
all, single processor machines.
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP || SPL_SMP
default 8
help
On multiprocessor machines, U-Boot sets up a stack for each CPU.
Stack memory is pre-allocated. U-Boot must therefore know the
maximum number of CPUs that may be present.
config SBI
bool
default y if RISCV_SMODE || SPL_RISCV_SMODE
choice
prompt "SBI support"
default SBI_V02
config SBI_V01
bool "SBI v0.1 support"
depends on SBI
help
This config allows kernel to use SBI v0.1 APIs. This will be
deprecated in future once legacy M-mode software are no longer in use.
config SBI_V02
bool "SBI v0.2 or later support"
depends on SBI
help
The SBI specification introduced the concept of extensions in version
v0.2. With this configuration option U-Boot can detect and use SBI
extensions. With the HSM extension introduced in SBI 0.2, only a
single hart needs to boot and enter the operating system. The booting
hart can bring up secondary harts one by one afterwards.
Choose this option if OpenSBI release v0.7 or above is used together
with U-Boot.
endchoice
config SBI_IPI
bool
depends on SBI
default y if RISCV_SMODE || SPL_RISCV_SMODE
depends on SMP
config XIP
bool "XIP mode"
help
XIP (eXecute In Place) is a method for executing code directly
from a NOR flash memory without copying the code to ram.
Say yes here if U-Boot boots from flash directly.
config SPL_XIP
bool "Enable XIP mode for SPL"
help
If SPL starts in read-only memory (XIP for example) then we shouldn't
rely on lock variables (for example hart_lottery and available_harts_lock),
this affects only SPL, other stages should proceed as non-XIP.
config AVAILABLE_HARTS
bool "Send IPI by available harts"
default y
help
By default, IPI sending mechanism will depend on available_harts.
If disable this, it will send IPI by CPUs node numbers of device tree.
config SHOW_REGS
bool "Show registers on unhandled exception"
config RISCV_PRIV_1_9
bool "Use version 1.9 of the RISC-V priviledged specification"
help
Older versions of the RISC-V priviledged specification had
separate counter enable CSRs for each privilege mode. Writing
to the unified mcounteren CSR on a processor implementing the
old specification will result in an illegal instruction
exception. In addition to counter CSR changes, the way virtual
memory is configured was also changed.
config STACK_SIZE_SHIFT
int
default 14
config OF_BOARD_FIXUP
default y if OF_SEPARATE && RISCV_SMODE
menu "Use assembly optimized implementation of memory routines"
config USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy"
default y
help
Enable the generation of an optimized version of memcpy.
Such an implementation may be faster under some conditions
but may increase the binary size.
config SPL_USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy for SPL"
default y if USE_ARCH_MEMCPY
depends on SPL
help
Enable the generation of an optimized version of memcpy.
Such an implementation may be faster under some conditions
but may increase the binary size.
config TPL_USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy for TPL"
default y if USE_ARCH_MEMCPY
depends on TPL
help
Enable the generation of an optimized version of memcpy.
Such an implementation may be faster under some conditions
but may increase the binary size.
config USE_ARCH_MEMMOVE
bool "Use an assembly optimized implementation of memmove"
default y
help
Enable the generation of an optimized version of memmove.
Such an implementation may be faster under some conditions
but may increase the binary size.
config SPL_USE_ARCH_MEMMOVE
bool "Use an assembly optimized implementation of memmove for SPL"
default y if USE_ARCH_MEMCPY
depends on SPL
help
Enable the generation of an optimized version of memmove.
Such an implementation may be faster under some conditions
but may increase the binary size.
config TPL_USE_ARCH_MEMMOVE
bool "Use an assembly optimized implementation of memmove for TPL"
default y if USE_ARCH_MEMCPY
depends on TPL
help
Enable the generation of an optimized version of memmove.
Such an implementation may be faster under some conditions
but may increase the binary size.
config USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset"
default y
help
Enable the generation of an optimized version of memset.
Such an implementation may be faster under some conditions
but may increase the binary size.
config SPL_USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset for SPL"
default y if USE_ARCH_MEMSET
depends on SPL
help
Enable the generation of an optimized version of memset.
Such an implementation may be faster under some conditions
but may increase the binary size.
config TPL_USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset for TPL"
default y if USE_ARCH_MEMSET
depends on TPL
help
Enable the generation of an optimized version of memset.
Such an implementation may be faster under some conditions
but may increase the binary size.
endmenu
config SPL_LOAD_FIT_OPENSBI_OS_BOOT
bool "Enable SPL (OpenSBI OS boot mode) applying linux from FIT"
depends on SPL_LOAD_FIT
help
Use fw_dynamic from the FIT image, and u-boot SPL will invoke it directly.
This is a shortcut boot flow, from u-boot SPL -> OpenSBI -> u-boot proper
-> linux to u-boot SPL -> OpenSBI -> linux.
endmenu