blob: 2c12f6e04410c1ee244df0728b38f6a63c2aec43 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* (C) Copyright 2015 Google, Inc
* (C) Copyright 2016 Heiko Stuebner <heiko@sntech.de>
*/
#include <bitfield.h>
#include <common.h>
#include <clk-uclass.h>
#include <dm.h>
#include <dt-structs.h>
#include <errno.h>
#include <log.h>
#include <malloc.h>
#include <mapmem.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/cru_rk3066.h>
#include <asm/arch-rockchip/grf_rk3066.h>
#include <asm/arch-rockchip/hardware.h>
#include <dt-bindings/clock/rk3066a-cru.h>
#include <dm/device_compat.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/uclass-internal.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/log2.h>
#include <linux/stringify.h>
struct rk3066_clk_plat {
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct dtd_rockchip_rk3066a_cru dtd;
#endif
};
struct pll_div {
u32 nr;
u32 nf;
u32 no;
};
enum {
VCO_MAX_HZ = 1416U * 1000000,
VCO_MIN_HZ = 300 * 1000000,
OUTPUT_MAX_HZ = 1416U * 1000000,
OUTPUT_MIN_HZ = 30 * 1000000,
FREF_MAX_HZ = 1416U * 1000000,
FREF_MIN_HZ = 30 * 1000,
};
enum {
/* PLL CON0 */
PLL_OD_MASK = GENMASK(3, 0),
/* PLL CON1 */
PLL_NF_MASK = GENMASK(12, 0),
/* PLL CON2 */
PLL_BWADJ_MASK = GENMASK(11, 0),
/* PLL CON3 */
PLL_RESET_SHIFT = 5,
/* GRF_SOC_STATUS0 */
SOCSTS_DPLL_LOCK = BIT(4),
SOCSTS_APLL_LOCK = BIT(5),
SOCSTS_CPLL_LOCK = BIT(6),
SOCSTS_GPLL_LOCK = BIT(7),
};
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _nr, _no) {\
.nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no};\
_Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\
(_nr * _no) == hz, #hz "Hz cannot be hit with PLL "\
"divisors on line " __stringify(__LINE__))
/* Keep divisors as low as possible to reduce jitter and power usage. */
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
static int rk3066_clk_set_pll(struct rk3066_cru *cru, enum rk_clk_id clk_id,
const struct pll_div *div)
{
int pll_id = rk_pll_id(clk_id);
struct rk3066_pll *pll = &cru->pll[pll_id];
/* All PLLs have the same VCO and output frequency range restrictions. */
uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000;
uint output_hz = vco_hz / div->no;
debug("%s: PLL at %x: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n", __func__,
(uint)pll, div->nf, div->nr, div->no, vco_hz, output_hz);
assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ &&
(div->no == 1 || !(div->no % 2)));
/* Enter reset. */
rk_setreg(&pll->con3, BIT(PLL_RESET_SHIFT));
rk_clrsetreg(&pll->con0,
CLKR_MASK | PLL_OD_MASK,
((div->nr - 1) << CLKR_SHIFT) | (div->no - 1));
rk_clrsetreg(&pll->con1, CLKF_MASK, div->nf - 1);
rk_clrsetreg(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1);
/* Exit reset. */
rk_clrreg(&pll->con3, BIT(PLL_RESET_SHIFT));
return 0;
}
static int rk3066_clk_configure_ddr(struct rk3066_cru *cru, struct rk3066_grf *grf,
unsigned int hz)
{
static const struct pll_div dpll_cfg[] = {
{.nf = 25, .nr = 2, .no = 1},
{.nf = 400, .nr = 9, .no = 2},
{.nf = 500, .nr = 9, .no = 2},
{.nf = 100, .nr = 3, .no = 1},
};
int cfg;
switch (hz) {
case 300000000:
cfg = 0;
break;
case 533000000: /* actually 533.3P MHz */
cfg = 1;
break;
case 666000000: /* actually 666.6P MHz */
cfg = 2;
break;
case 800000000:
cfg = 3;
break;
default:
debug("%s: unsupported SDRAM frequency", __func__);
return -EINVAL;
}
/* Enter PLL slow mode. */
rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK,
PLL_MODE_SLOW << DPLL_MODE_SHIFT);
rk3066_clk_set_pll(cru, CLK_DDR, &dpll_cfg[cfg]);
/* Wait for PLL lock. */
while (!(readl(&grf->soc_status0) & SOCSTS_DPLL_LOCK))
udelay(1);
/* Enter PLL normal mode. */
rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK,
PLL_MODE_NORMAL << DPLL_MODE_SHIFT);
return 0;
}
static int rk3066_clk_configure_cpu(struct rk3066_cru *cru, struct rk3066_grf *grf,
unsigned int hz)
{
static const struct pll_div apll_cfg[] = {
{.nf = 50, .nr = 1, .no = 2},
{.nf = 59, .nr = 1, .no = 1},
};
int div_core_peri, div_cpu_aclk, cfg;
/*
* We support two possible frequencies, the safe 600MHz
* which will work with default pmic settings and will
* be set to get away from the 24MHz default and
* the maximum of 1.416Ghz, which boards can set if they
* were able to get pmic support for it.
*/
switch (hz) {
case APLL_SAFE_HZ:
cfg = 0;
div_core_peri = 1;
div_cpu_aclk = 3;
break;
case APLL_HZ:
cfg = 1;
div_core_peri = 2;
div_cpu_aclk = 3;
break;
default:
debug("unsupported ARMCLK frequency");
return -EINVAL;
}
/* Enter PLL slow mode. */
rk_clrsetreg(&cru->cru_mode_con, APLL_MODE_MASK,
PLL_MODE_SLOW << APLL_MODE_SHIFT);
rk3066_clk_set_pll(cru, CLK_ARM, &apll_cfg[cfg]);
/* Wait for PLL lock. */
while (!(readl(&grf->soc_status0) & SOCSTS_APLL_LOCK))
udelay(1);
/* Set divider for peripherals attached to the CPU core. */
rk_clrsetreg(&cru->cru_clksel_con[0],
CORE_PERI_DIV_MASK,
div_core_peri << CORE_PERI_DIV_SHIFT);
/* Set up dependent divisor for cpu_aclk. */
rk_clrsetreg(&cru->cru_clksel_con[1],
CPU_ACLK_DIV_MASK,
div_cpu_aclk << CPU_ACLK_DIV_SHIFT);
/* Enter PLL normal mode. */
rk_clrsetreg(&cru->cru_mode_con, APLL_MODE_MASK,
PLL_MODE_NORMAL << APLL_MODE_SHIFT);
return hz;
}
static uint32_t rk3066_clk_pll_get_rate(struct rk3066_cru *cru,
enum rk_clk_id clk_id)
{
u32 nr, no, nf;
u32 con;
int pll_id = rk_pll_id(clk_id);
struct rk3066_pll *pll = &cru->pll[pll_id];
static u8 clk_shift[CLK_COUNT] = {
0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, CPLL_MODE_SHIFT,
GPLL_MODE_SHIFT
};
uint shift;
con = readl(&cru->cru_mode_con);
shift = clk_shift[clk_id];
switch (FIELD_GET(APLL_MODE_MASK, con >> shift)) {
case PLL_MODE_SLOW:
return OSC_HZ;
case PLL_MODE_NORMAL:
/* normal mode */
con = readl(&pll->con0);
no = bitfield_extract_by_mask(con, CLKOD_MASK) + 1;
nr = bitfield_extract_by_mask(con, CLKR_MASK) + 1;
con = readl(&pll->con1);
nf = bitfield_extract_by_mask(con, CLKF_MASK) + 1;
return (OSC_HZ * nf) / (nr * no);
case PLL_MODE_DEEP:
default:
return 32768;
}
}
static ulong rk3066_clk_mmc_get_clk(struct rk3066_cru *cru, uint gclk_rate,
int periph)
{
uint div;
u32 con;
switch (periph) {
case HCLK_EMMC:
case SCLK_EMMC:
con = readl(&cru->cru_clksel_con[12]);
div = bitfield_extract_by_mask(con, EMMC_DIV_MASK);
break;
case HCLK_SDMMC:
case SCLK_SDMMC:
con = readl(&cru->cru_clksel_con[11]);
div = bitfield_extract_by_mask(con, MMC0_DIV_MASK);
break;
case HCLK_SDIO:
case SCLK_SDIO:
con = readl(&cru->cru_clksel_con[12]);
div = bitfield_extract_by_mask(con, SDIO_DIV_MASK);
break;
default:
return -EINVAL;
}
return DIV_TO_RATE(gclk_rate, div) / 2;
}
static ulong rk3066_clk_mmc_set_clk(struct rk3066_cru *cru, uint gclk_rate,
int periph, uint freq)
{
int src_clk_div;
debug("%s: gclk_rate=%u\n", __func__, gclk_rate);
/* MMC clock by default divides by 2 internally, so need to provide double in CRU. */
src_clk_div = DIV_ROUND_UP(gclk_rate / 2, freq) - 1;
assert(src_clk_div <= 0x3f);
switch (periph) {
case HCLK_EMMC:
case SCLK_EMMC:
rk_clrsetreg(&cru->cru_clksel_con[12],
EMMC_DIV_MASK,
src_clk_div << EMMC_DIV_SHIFT);
break;
case HCLK_SDMMC:
case SCLK_SDMMC:
rk_clrsetreg(&cru->cru_clksel_con[11],
MMC0_DIV_MASK,
src_clk_div << MMC0_DIV_SHIFT);
break;
case HCLK_SDIO:
case SCLK_SDIO:
rk_clrsetreg(&cru->cru_clksel_con[12],
SDIO_DIV_MASK,
src_clk_div << SDIO_DIV_SHIFT);
break;
default:
return -EINVAL;
}
return rk3066_clk_mmc_get_clk(cru, gclk_rate, periph);
}
static ulong rk3066_clk_spi_get_clk(struct rk3066_cru *cru, uint gclk_rate,
int periph)
{
uint div;
u32 con;
switch (periph) {
case SCLK_SPI0:
con = readl(&cru->cru_clksel_con[25]);
div = bitfield_extract_by_mask(con, SPI0_DIV_MASK);
break;
case SCLK_SPI1:
con = readl(&cru->cru_clksel_con[25]);
div = bitfield_extract_by_mask(con, SPI1_DIV_MASK);
break;
default:
return -EINVAL;
}
return DIV_TO_RATE(gclk_rate, div);
}
static ulong rk3066_clk_spi_set_clk(struct rk3066_cru *cru, uint gclk_rate,
int periph, uint freq)
{
int src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1;
assert(src_clk_div < 128);
switch (periph) {
case SCLK_SPI0:
assert(src_clk_div <= SPI0_DIV_MASK >> SPI0_DIV_SHIFT);
rk_clrsetreg(&cru->cru_clksel_con[25],
SPI0_DIV_MASK,
src_clk_div << SPI0_DIV_SHIFT);
break;
case SCLK_SPI1:
assert(src_clk_div <= SPI1_DIV_MASK >> SPI1_DIV_SHIFT);
rk_clrsetreg(&cru->cru_clksel_con[25],
SPI1_DIV_MASK,
src_clk_div << SPI1_DIV_SHIFT);
break;
default:
return -EINVAL;
}
return rk3066_clk_spi_get_clk(cru, gclk_rate, periph);
}
static ulong rk3066_clk_saradc_get_clk(struct rk3066_cru *cru, int periph)
{
u32 div, con;
switch (periph) {
case SCLK_SARADC:
con = readl(&cru->cru_clksel_con[24]);
div = bitfield_extract_by_mask(con, SARADC_DIV_MASK);
break;
case SCLK_TSADC:
con = readl(&cru->cru_clksel_con[34]);
div = bitfield_extract_by_mask(con, TSADC_DIV_MASK);
break;
default:
return -EINVAL;
}
return DIV_TO_RATE(PERI_PCLK_HZ, div);
}
static ulong rk3066_clk_saradc_set_clk(struct rk3066_cru *cru, uint hz,
int periph)
{
int src_clk_div;
src_clk_div = DIV_ROUND_UP(PERI_PCLK_HZ, hz) - 1;
assert(src_clk_div < 128);
switch (periph) {
case SCLK_SARADC:
rk_clrsetreg(&cru->cru_clksel_con[24],
SARADC_DIV_MASK,
src_clk_div << SARADC_DIV_SHIFT);
break;
case SCLK_TSADC:
rk_clrsetreg(&cru->cru_clksel_con[34],
SARADC_DIV_MASK,
src_clk_div << SARADC_DIV_SHIFT);
break;
default:
return -EINVAL;
}
return rk3066_clk_saradc_get_clk(cru, periph);
}
static void rk3066_clk_init(struct rk3066_cru *cru, struct rk3066_grf *grf)
{
u32 aclk_div, hclk_div, pclk_div, h2p_div;
/* Enter PLL slow mode. */
rk_clrsetreg(&cru->cru_mode_con,
GPLL_MODE_MASK |
CPLL_MODE_MASK,
PLL_MODE_SLOW << GPLL_MODE_SHIFT |
PLL_MODE_SLOW << CPLL_MODE_SHIFT);
/* Init PLL. */
rk3066_clk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg);
rk3066_clk_set_pll(cru, CLK_CODEC, &cpll_init_cfg);
/* Wait for PLL lock. */
while ((readl(&grf->soc_status0) &
(SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) !=
(SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK))
udelay(1);
/*
* Select CPU clock PLL source and
* reparent aclk_cpu_pre from APPL to GPLL.
* Set up dependent divisors for PCLK/HCLK and ACLK clocks.
*/
aclk_div = DIV_ROUND_UP(GPLL_HZ, CPU_ACLK_HZ) - 1;
assert((aclk_div + 1) * CPU_ACLK_HZ == GPLL_HZ && aclk_div <= 0x1f);
rk_clrsetreg(&cru->cru_clksel_con[0],
CPU_ACLK_PLL_MASK |
A9_CORE_DIV_MASK,
CPU_ACLK_PLL_SELECT_GPLL << CPU_ACLK_PLL_SHIFT |
aclk_div << A9_CORE_DIV_SHIFT);
hclk_div = ilog2(CPU_ACLK_HZ / CPU_HCLK_HZ);
assert((1 << hclk_div) * CPU_HCLK_HZ == CPU_ACLK_HZ && hclk_div < 0x3);
pclk_div = ilog2(CPU_ACLK_HZ / CPU_PCLK_HZ);
assert((1 << pclk_div) * CPU_PCLK_HZ == CPU_ACLK_HZ && pclk_div < 0x4);
h2p_div = ilog2(CPU_HCLK_HZ / CPU_H2P_HZ);
assert((1 << h2p_div) * CPU_H2P_HZ == CPU_HCLK_HZ && pclk_div < 0x3);
rk_clrsetreg(&cru->cru_clksel_con[1],
AHB2APB_DIV_MASK |
CPU_PCLK_DIV_MASK |
CPU_HCLK_DIV_MASK,
h2p_div << AHB2APB_DIV_SHIFT |
pclk_div << CPU_PCLK_DIV_SHIFT |
hclk_div << CPU_HCLK_DIV_SHIFT);
/*
* Select PERI clock PLL source and
* set up dependent divisors for PCLK/HCLK and ACLK clocks.
*/
aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ);
assert((1 << hclk_div) * PERI_HCLK_HZ ==
PERI_ACLK_HZ && (hclk_div < 0x4));
pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ);
assert((1 << pclk_div) * PERI_PCLK_HZ ==
PERI_ACLK_HZ && (pclk_div < 0x4));
rk_clrsetreg(&cru->cru_clksel_con[10],
PERI_PCLK_DIV_MASK |
PERI_HCLK_DIV_MASK |
PERI_ACLK_DIV_MASK,
PERI_SEL_GPLL << PERI_SEL_PLL_SHIFT |
pclk_div << PERI_PCLK_DIV_SHIFT |
hclk_div << PERI_HCLK_DIV_SHIFT |
aclk_div << PERI_ACLK_DIV_SHIFT);
/* Enter PLL normal mode. */
rk_clrsetreg(&cru->cru_mode_con,
GPLL_MODE_MASK |
CPLL_MODE_MASK,
PLL_MODE_NORMAL << GPLL_MODE_SHIFT |
PLL_MODE_NORMAL << CPLL_MODE_SHIFT);
rk3066_clk_mmc_set_clk(cru, PERI_HCLK_HZ, HCLK_SDMMC, 16000000);
}
static ulong rk3066_clk_get_rate(struct clk *clk)
{
struct rk3066_clk_priv *priv = dev_get_priv(clk->dev);
ulong new_rate, gclk_rate;
gclk_rate = rk3066_clk_pll_get_rate(priv->cru, CLK_GENERAL);
switch (clk->id) {
case 1 ... 4:
new_rate = rk3066_clk_pll_get_rate(priv->cru, clk->id);
break;
case HCLK_EMMC:
case HCLK_SDMMC:
case HCLK_SDIO:
case SCLK_EMMC:
case SCLK_SDMMC:
case SCLK_SDIO:
new_rate = rk3066_clk_mmc_get_clk(priv->cru, PERI_HCLK_HZ,
clk->id);
break;
case SCLK_SPI0:
case SCLK_SPI1:
new_rate = rk3066_clk_spi_get_clk(priv->cru, PERI_PCLK_HZ,
clk->id);
break;
case PCLK_I2C0:
case PCLK_I2C1:
case PCLK_I2C2:
case PCLK_I2C3:
case PCLK_I2C4:
return gclk_rate;
case SCLK_SARADC:
case SCLK_TSADC:
new_rate = rk3066_clk_saradc_get_clk(priv->cru, clk->id);
break;
case SCLK_TIMER0:
case SCLK_TIMER1:
case SCLK_TIMER2:
case SCLK_UART0:
case SCLK_UART1:
case SCLK_UART2:
case SCLK_UART3:
return OSC_HZ;
default:
return -ENOENT;
}
return new_rate;
}
static ulong rk3066_clk_set_rate(struct clk *clk, ulong rate)
{
struct rk3066_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3066_cru *cru = priv->cru;
ulong new_rate;
switch (clk->id) {
case PLL_APLL:
new_rate = rk3066_clk_configure_cpu(priv->cru, priv->grf, rate);
break;
case CLK_DDR:
new_rate = rk3066_clk_configure_ddr(priv->cru, priv->grf, rate);
break;
case HCLK_EMMC:
case HCLK_SDMMC:
case HCLK_SDIO:
case SCLK_EMMC:
case SCLK_SDMMC:
case SCLK_SDIO:
new_rate = rk3066_clk_mmc_set_clk(cru, PERI_HCLK_HZ,
clk->id, rate);
break;
case SCLK_SPI0:
case SCLK_SPI1:
new_rate = rk3066_clk_spi_set_clk(cru, PERI_PCLK_HZ,
clk->id, rate);
break;
case SCLK_SARADC:
case SCLK_TSADC:
new_rate = rk3066_clk_saradc_set_clk(cru, rate, clk->id);
break;
case PLL_CPLL:
case PLL_GPLL:
case ACLK_CPU:
case HCLK_CPU:
case PCLK_CPU:
case ACLK_PERI:
case HCLK_PERI:
case PCLK_PERI:
return 0;
default:
return -ENOENT;
}
return new_rate;
}
static int rk3066_clk_enable(struct clk *clk)
{
struct rk3066_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
case HCLK_NANDC0:
rk_clrreg(&priv->cru->cru_clkgate_con[5], BIT(9));
break;
case HCLK_SDMMC:
rk_clrreg(&priv->cru->cru_clkgate_con[5], BIT(10));
break;
case HCLK_SDIO:
rk_clrreg(&priv->cru->cru_clkgate_con[5], BIT(11));
break;
}
return 0;
}
static int rk3066_clk_disable(struct clk *clk)
{
struct rk3066_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
case HCLK_NANDC0:
rk_setreg(&priv->cru->cru_clkgate_con[5], BIT(9));
break;
case HCLK_SDMMC:
rk_setreg(&priv->cru->cru_clkgate_con[5], BIT(10));
break;
case HCLK_SDIO:
rk_setreg(&priv->cru->cru_clkgate_con[5], BIT(11));
break;
}
return 0;
}
static struct clk_ops rk3066_clk_ops = {
.disable = rk3066_clk_disable,
.enable = rk3066_clk_enable,
.get_rate = rk3066_clk_get_rate,
.set_rate = rk3066_clk_set_rate,
};
static int rk3066_clk_of_to_plat(struct udevice *dev)
{
if (CONFIG_IS_ENABLED(OF_REAL)) {
struct rk3066_clk_priv *priv = dev_get_priv(dev);
priv->cru = dev_read_addr_ptr(dev);
}
return 0;
}
static int rk3066_clk_probe(struct udevice *dev)
{
struct rk3066_clk_priv *priv = dev_get_priv(dev);
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
if (IS_ERR(priv->grf))
return PTR_ERR(priv->grf);
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3066_clk_plat *plat = dev_get_plat(dev);
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
if (IS_ENABLED(CONFIG_TPL_BUILD)) {
rk3066_clk_init(priv->cru, priv->grf);
/* Init CPU frequency. */
rk3066_clk_configure_cpu(priv->cru, priv->grf, APLL_SAFE_HZ);
}
return 0;
}
static int rk3066_clk_bind(struct udevice *dev)
{
struct udevice *sys_child;
struct sysreset_reg *priv;
int reg_offset, ret;
/* The reset driver does not have a device node, so bind it here. */
ret = device_bind(dev, DM_DRIVER_GET(sysreset_rockchip), "sysreset",
NULL, ofnode_null(), &sys_child);
if (ret) {
dev_dbg(dev, "Warning: No sysreset driver: ret=%d\n", ret);
} else {
priv = malloc(sizeof(struct sysreset_reg));
priv->glb_srst_fst_value = offsetof(struct rk3066_cru,
cru_glb_srst_fst_value);
priv->glb_srst_snd_value = offsetof(struct rk3066_cru,
cru_glb_srst_snd_value);
dev_set_priv(sys_child, priv);
}
if (CONFIG_IS_ENABLED(RESET_ROCKCHIP)) {
reg_offset = offsetof(struct rk3066_cru, cru_softrst_con[0]);
ret = rockchip_reset_bind(dev, reg_offset, 9);
if (ret)
dev_dbg(dev, "Warning: software reset driver bind failed\n");
}
return 0;
}
static const struct udevice_id rk3066_clk_ids[] = {
{ .compatible = "rockchip,rk3066a-cru" },
{ }
};
U_BOOT_DRIVER(rockchip_rk3066a_cru) = {
.name = "rockchip_rk3066a_cru",
.id = UCLASS_CLK,
.ops = &rk3066_clk_ops,
.probe = rk3066_clk_probe,
.bind = rk3066_clk_bind,
.of_match = rk3066_clk_ids,
.of_to_plat = rk3066_clk_of_to_plat,
.priv_auto = sizeof(struct rk3066_clk_priv),
.plat_auto = sizeof(struct rk3066_clk_plat),
};