blob: 5d23ecb34bf3c0eaf6f10113252fe153dc682dbb [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Keymile kmcent2 Device Tree Source, based on T1040RDB DTS
*
* (C) Copyright 2016
* Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
*
* Copyright 2014 - 2015 Freescale Semiconductor Inc.
*/
/include/ "t104xsi-pre.dtsi"
/ {
model = "keymile,kmcent2";
compatible = "keymile,kmcent2";
aliases {
front_phy = &front_phy;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bman_fbpr: bman-fbpr {
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
};
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x04000000
1 0 0xf 0xfa000000 0x00010000
2 0 0xf 0xfb000000 0x00010000
4 0 0xf 0xc0000000 0x08000000
6 0 0xf 0xd0000000 0x08000000
7 0 0xf 0xd8000000 0x08000000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x04000000>;
bank-width = <2>;
device-width = <2>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
board-control@2,0 {
compatible = "keymile,qriox";
reg = <0x2 0x0 0x80>;
};
chassis-mgmt@6,0 {
compatible = "keymile,bfticu";
reg = <6 0 0x100>;
interrupt-controller;
interrupt-parent = <&mpic>;
interrupts = <11 1 0 0>;
#interrupt-cells = <1>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
network-clock@1 {
compatible = "zarlink,zl30364";
reg = <1>;
spi-max-frequency = <1000000>;
};
};
sdhc@114000 {
status = "disabled";
};
i2c@118000 {
clock-frequency = <100000>;
mux@70 {
compatible = "nxp,pca9547";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@54 {
compatible = "atmel,24c02";
reg = <0x54>;
pagesize = <2>;
read-only;
label = "ddr3-spd";
};
};
i2c@7 {
reg = <7>;
#address-cells = <1>;
#size-cells = <0>;
temp-sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
label = "SENSOR_0";
};
temp-sensor@4a {
compatible = "national,lm75";
reg = <0x4a>;
label = "SENSOR_2";
};
temp-sensor@4b {
compatible = "national,lm75";
reg = <0x4b>;
label = "SENSOR_3";
};
};
};
};
i2c@118100 {
clock-frequency = <100000>;
eeprom@50 {
compatible = "atmel,24c08";
reg = <0x50>;
pagesize = <16>;
};
eeprom@54 {
compatible = "atmel,24c08";
reg = <0x54>;
pagesize = <16>;
};
};
i2c@119000 {
status = "disabled";
};
i2c@119100 {
status = "disabled";
};
serial2: serial@11d500 {
status = "disabled";
};
serial3: serial@11d600 {
status = "disabled";
};
usb0: usb@210000 {
status = "disabled";
};
usb1: usb@211000 {
status = "disabled";
};
display@180000 {
status = "disabled";
};
sata@220000 {
status = "disabled";
};
sata@221000 {
status = "disabled";
};
fman@400000 {
ethernet@e0000 {
phy-mode = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
ethernet@e2000 {
phy-mode = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
ethernet@e4000 {
status = "disabled";
};
ethernet@e6000 {
status = "disabled";
};
ethernet@e8000 {
phy-handle = <&front_phy>;
phy-mode = "rgmii-id";
};
mdio0: mdio@fc000 {
front_phy: ethernet-phy@11 {
reg = <0x11>;
};
};
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
status = "disabled";
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
0x01000000 0 0 0xf 0xf8010000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
status = "disabled";
reg = <0xf 0xfe260000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci3: pcie@ffe270000 {
status = "disabled";
reg = <0xf 0xfe270000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
qe: qe@ffe140000 {
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
ucc_hdlc: ucc@2000 {
device_type = "hdlc";
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk9";
tx-clock-name = "clk9";
fsl,hdlc-bus;
};
};
};
#include "t1040si-post.dtsi"