blob: a54eff43addec7cd5a5928cd64f84cf6de40123d [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2017-2018, Intel Corporation
*/
#ifndef __INTEL_SMC_H
#define __INTEL_SMC_H
#include <linux/arm-smccc.h>
#include <linux/bitops.h>
/*
* This file defines the Secure Monitor Call (SMC) message protocol used for
* service layer driver in normal world (EL1) to communicate with secure
* monitor software in Secure Monitor Exception Level 3 (EL3).
*
* This file is shared with secure firmware (FW) which is out of u-boot tree.
*
* An ARM SMC instruction takes a function identifier and up to 6 64-bit
* register values as arguments, and can return up to 4 64-bit register
* values. The operation of the secure monitor is determined by the parameter
* values passed in through registers.
* EL1 and EL3 communicates pointer as physical address rather than the
* virtual address.
*/
/*
* Functions specified by ARM SMC Calling convention:
*
* FAST call executes atomic operations, returns when the requested operation
* has completed.
* STD call starts a operation which can be preempted by a non-secure
* interrupt. The call can return before the requested operation has
* completed.
*
* a0..a7 is used as register names in the descriptions below, on arm32
* that translates to r0..r7 and on arm64 to w0..w7.
*/
#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
ARM_SMCCC_OWNER_SIP, (func_num))
#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
ARM_SMCCC_OWNER_SIP, (func_num))
/*
* Return values in INTEL_SIP_SMC_* call
*
* INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION:
* Secure monitor software doesn't recognize the request.
*
* INTEL_SIP_SMC_STATUS_OK:
* SMC call completed successfully,
* In case of FPGA configuration write operation, it means secure monitor
* software can accept the next chunk of FPGA configuration data.
*
* INTEL_SIP_SMC_STATUS_BUSY:
* In case of FPGA configuration write operation, it means secure monitor
* software is still processing previous data & can't accept the next chunk
* of data. Service driver needs to issue
* INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the
* completed block(s).
*
* INTEL_SIP_SMC_STATUS_ERROR:
* There is error during the SMC call process.
*
* INTEL_SIP_SMC_REG_ERROR:
* There is error during a read or write operation of the protected
* registers.
*/
#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
#define INTEL_SIP_SMC_STATUS_OK 0x0
#define INTEL_SIP_SMC_STATUS_BUSY 0x1
#define INTEL_SIP_SMC_STATUS_REJECTED 0x2
#define INTEL_SIP_SMC_STATUS_ERROR 0x4
#define INTEL_SIP_SMC_REG_ERROR 0x5
#define INTEL_SIP_SMC_RSU_ERROR 0x7
/*
* Request INTEL_SIP_SMC_FPGA_CONFIG_START
*
* Sync call used by service driver at EL1 to request the FPGA in EL3 to
* be prepare to receive a new configuration.
*
* Call register usage:
* a0: INTEL_SIP_SMC_FPGA_CONFIG_START.
* a1: flag for full or partial configuration
* 0 full reconfiguration.
* 1 partial reconfiguration.
* a2-7: not used.
*
* Return status:
* a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_STATUS_ERROR.
* a1-3: not used.
*/
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1
#define INTEL_SIP_SMC_FPGA_CONFIG_START \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START)
/*
* Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE
*
* Async call used by service driver at EL1 to provide FPGA configuration data
* to secure world.
*
* Call register usage:
* a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE.
* a1: 64bit physical address of the configuration data memory block
* a2: Size of configuration data block.
* a3-7: not used.
*
* Return status:
* a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY,
* INTEL_SIP_SMC_STATUS_REJECTED or INTEL_SIP_SMC_STATUS_ERROR.
* a1: 64bit physical address of 1st completed memory block if any completed
* block, otherwise zero value.
* a2: 64bit physical address of 2nd completed memory block if any completed
* block, otherwise zero value.
* a3: 64bit physical address of 3rd completed memory block if any completed
* block, otherwise zero value.
*/
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2
#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \
INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE)
/*
* Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE
*
* Sync call used by service driver at EL1 to track the completed write
* transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE
* call returns INTEL_SIP_SMC_STATUS_BUSY.
*
* Call register usage:
* a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE.
* a1-7: not used.
*
* Return status:
* a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or
* INTEL_SIP_SMC_STATUS_ERROR.
* a1: 64bit physical address of 1st completed memory block.
* a2: 64bit physical address of 2nd completed memory block if
* any completed block, otherwise zero value.
* a3: 64bit physical address of 3rd completed memory block if
* any completed block, otherwise zero value.
*/
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3
#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
/*
* Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE
*
* Sync call used by service driver at EL1 to inform secure world that all
* data are sent, to check whether or not the secure world had completed
* the FPGA configuration process.
*
* Call register usage:
* a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE.
* a1-7: not used.
*
* Return status:
* a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or
* INTEL_SIP_SMC_STATUS_ERROR.
* a1-3: not used.
*/
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4
#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE)
/*
* Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM
*
* Sync call used by service driver at EL1 to query the physical address of
* memory block reserved by secure monitor software.
*
* Call register usage:
* a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM.
* a1-7: not used.
*
* Return status:
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
* a1: start of physical address of reserved memory block.
* a2: size of reserved memory block.
* a3: not used.
*/
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5
#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM)
/*
* Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK
*
* For SMC loop-back mode only, used for internal integration, debugging
* or troubleshooting.
*
* Call register usage:
* a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK.
* a1-7: not used.
*
* Return status:
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
* a1-3: not used.
*/
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6
#define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK)
/*
* Request INTEL_SIP_SMC_REG_READ
*
* Read a protected register using SMCCC
*
* Call register usage:
* a0: INTEL_SIP_SMC_REG_READ.
* a1: register address.
* a2-7: not used.
*
* Return status:
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
* a1: Value in the register
* a2-3: not used.
*/
#define INTEL_SIP_SMC_FUNCID_REG_READ 7
#define INTEL_SIP_SMC_REG_READ \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)
/*
* Request INTEL_SIP_SMC_REG_WRITE
*
* Write a protected register using SMCCC
*
* Call register usage:
* a0: INTEL_SIP_SMC_REG_WRITE.
* a1: register address
* a2: value to program into register.
* a3-7: not used.
*
* Return status:
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
* a1-3: not used.
*/
#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
#define INTEL_SIP_SMC_REG_WRITE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)
/*
* Request INTEL_SIP_SMC_FUNCID_REG_UPDATE
*
* Update one or more bits in a protected register using a
* read-modify-write operation.
*
* Call register usage:
* a0: INTEL_SIP_SMC_REG_UPDATE.
* a1: register address
* a2: Write Mask.
* a3: Value to write.
* a4-7: not used.
*
* Return status:
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
* a1-3: Not used.
*/
#define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9
#define INTEL_SIP_SMC_REG_UPDATE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)
/*
* Request INTEL_SIP_SMC_RSU_STATUS
*
* Sync call used by service driver at EL1 to query the RSU status
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_STATUS
* a1-7 not used
*
* Return status
* a0: Current Image
* a1: Last Failing Image
* a2: Version [width 32 bit] | State [width 32 bit]
* a3: Error details [width 32 bit] | Error location [width 32 bit]
*
* Or
*
* a0: INTEL_SIP_SMC_RSU_ERROR
*/
#define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11
#define INTEL_SIP_SMC_RSU_STATUS \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS)
/*
* Request INTEL_SIP_SMC_RSU_UPDATE
*
* Sync call used by service driver at EL1 to tell you next reboot is RSU_UPDATE
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_UPDATE
* a1 64bit physical address of the configuration data memory in flash
* a2-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK
*/
#define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12
#define INTEL_SIP_SMC_RSU_UPDATE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)
/*
* Request INTEL_SIP_SMC_ECC_DBE
*
* Sync call used by service driver at EL1 alert EL3 that a Double Bit
* ECC error has occurred.
*
* Call register usage:
* a0 INTEL_SIP_SMC_ECC_DBE
* a1 SysManager Double Bit Error value
* a2-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK
*/
#define INTEL_SIP_SMC_FUNCID_ECC_DBE 13
#define INTEL_SIP_SMC_ECC_DBE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
/*
* Request INTEL_SIP_SMC_RSU_NOTIFY
*
* Sync call used by service driver at EL1 to report HPS software execution stage
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_NOTIFY
* a1 32bit HPS software execution stage
* a2-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
*/
#define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14
#define INTEL_SIP_SMC_RSU_NOTIFY \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY)
/*
* Request INTEL_SIP_SMC_RSU_RETRY_COUNTER
*
* Sync call used by service driver at EL1 to query the RSU retry counter
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_RETRY_COUNTER
* a1-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_RSU_ERROR.
* a1 retry counter
*/
#define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15
#define INTEL_SIP_SMC_RSU_RETRY_COUNTER \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER)
/*
* Request INTEL_SIP_SMC_RSU_DCMF_VERSION
*
* Sync call used by service driver at EL1 to query DCMF version
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_DCMF_VERSION
* a1-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK
* a1 dcmf1 version | dcmf0 version
* a2 dcmf3 version | dcmf2 version
*
* Or
*
* a0 INTEL_SIP_SMC_RSU_ERROR
*/
#define INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION 16
#define INTEL_SIP_SMC_RSU_DCMF_VERSION \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION)
/*
* Request INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION
*
* Sync call used by SSBL (EL2) to copy DCMF version to ATF memory
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION
* a1 dcmf1 version | dcmf0 version
* a2 dcmf3 version | dcmf2 version
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK
*/
#define INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_VERSION 17
#define INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_VERSION)
/*
* Request INTEL_SIP_SMC_RSU_MAX_RETRY
*
* Sync call used by service driver at EL1 to query max_retry parameter
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_MAX_RETRY
* a1-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK
* a1 max_retry
*
* Or
*
* a0 INTEL_SIP_SMC_RSU_ERROR
*/
#define INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY 18
#define INTEL_SIP_SMC_RSU_MAX_RETRY \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY)
/*
* Request INTEL_SIP_SMC_RSU_COPY_MAX_RETRY
*
* Sync call used by SSBL (EL2) to copy RSU 'max retry' to ATF memory
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_COPY_MAX_RETRY
* a1 max retry
* a2-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK
*/
#define INTEL_SIP_SMC_FUNCID_RSU_COPY_MAX_RETRY 19
#define INTEL_SIP_SMC_RSU_COPY_MAX_RETRY \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_COPY_MAX_RETRY)
/*
* Request INTEL_SIP_SMC_RSU_DCMF_STATUS
*
* Sync call used by service driver at EL1 to query DCMF status
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_DCMF_STATUS
* a1-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK
* a1 dcmf3 status | dcmf2 status | dcmf1 status | dcmf0 status
*
* Or
*
* a0 INTEL_SIP_SMC_RSU_ERROR
*/
#define INTEL_SIP_SMC_FUNCID_RSU_DCMF_STATUS 20
#define INTEL_SIP_SMC_RSU_DCMF_STATUS \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_STATUS)
/*
* Request INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS
*
* Sync call used by SSBL (EL2) to copy RSU 'dcmf status' to ATF memory
*
* Call register usage:
* a0 INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS
* a1 dcmf status
* a2-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK
*/
#define INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_STATUS 21
#define INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_STATUS)
/*
* Request INTEL_SIP_SMC_HPS_SET_BRIDGES
*
* Enable/disable the SoC FPGA bridges
*
* Call register usage:
* a0 INTEL_SIP_SMC_HPS_SET_BRIDGES
* a1 Set bridges status:
* 0 - Disable
* 1 - Enable
* a2-7 not used
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK
*/
#define INTEL_SIP_SMC_FUNCID_HPS_SET_BRIDGES 50
#define INTEL_SIP_SMC_HPS_SET_BRIDGES \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HPS_SET_BRIDGES)
/*
* Request INTEL_SIP_SMC_MBOX_SEND_CMD
*
* Send mailbox command to SDM
*
* Call register usage:
* a0 INTEL_SIP_SMC_MBOX_SEND_CMD
* a1 Mailbox command
* a2 64bit physical address pointer to command's arguments
* a3 Length of the argument
* a4 Urgent command:
* 0 - Disable
* 1 - Enable
* a5 64bit physical address pointer to a buffer for receiving responses
* a6 Length of the buffer
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR
* a1 Status of mailbox response
* a2 Received length in the buffer
*/
#define INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD 60
#define INTEL_SIP_SMC_MBOX_SEND_CMD \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD)
/*
* Request INTEL_SIP_SMC_GET_USERCODE
*
* Send mailbox command to get usercode from SDM
*
* Call register usage:
* a0 INTEL_SIP_SMC_GET_USERCODE
* a1-7 not used.
*
* Return status
* a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR
* a1 User code
* a2-3 not used.
*/
#define INTEL_SIP_SMC_FUNCID_GET_USERCODE 61
#define INTEL_SIP_SMC_GET_USERCODE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_GET_USERCODE)
#endif