| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2017 Microchip Technology Inc. All rights reserved. |
| */ |
| |
| #include <dm.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <miiphy.h> |
| #include <memalign.h> |
| #include <net.h> |
| #include <usb.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include "usb_ether.h" |
| #include "lan7x.h" |
| |
| /* |
| * Lan7x infrastructure commands |
| */ |
| int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data) |
| { |
| int len; |
| ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1); |
| |
| cpu_to_le32s(&data); |
| tmpbuf[0] = data; |
| |
| len = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), |
| USB_VENDOR_REQUEST_WRITE_REGISTER, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 0, index, tmpbuf, sizeof(data), |
| USB_CTRL_SET_TIMEOUT_MS); |
| if (len != sizeof(data)) { |
| debug("%s failed: index=%d, data=%d, len=%d", |
| __func__, index, data, len); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data) |
| { |
| int len; |
| ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1); |
| |
| len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), |
| USB_VENDOR_REQUEST_READ_REGISTER, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 0, index, tmpbuf, sizeof(*data), |
| USB_CTRL_GET_TIMEOUT_MS); |
| *data = tmpbuf[0]; |
| if (len != sizeof(*data)) { |
| debug("%s failed: index=%d, len=%d", __func__, index, len); |
| return -EIO; |
| } |
| |
| le32_to_cpus(data); |
| return 0; |
| } |
| |
| static int lan7x_phy_wait_not_busy(struct usb_device *udev) |
| { |
| return lan7x_wait_for_bit(udev, __func__, |
| MII_ACC, MII_ACC_MII_BUSY, |
| false, 100, 0); |
| } |
| |
| int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx) |
| { |
| u32 val, addr; |
| |
| /* confirm MII not busy */ |
| if (lan7x_phy_wait_not_busy(udev)) { |
| debug("MII is busy in %s\n", __func__); |
| return -ETIMEDOUT; |
| } |
| |
| /* set the address, index & direction (read from PHY) */ |
| addr = (phy_id << 11) | (idx << 6) | |
| MII_ACC_MII_READ | MII_ACC_MII_BUSY; |
| lan7x_write_reg(udev, MII_ACC, addr); |
| |
| if (lan7x_phy_wait_not_busy(udev)) { |
| debug("Timed out reading MII reg %02X\n", idx); |
| return -ETIMEDOUT; |
| } |
| |
| lan7x_read_reg(udev, MII_DATA, &val); |
| |
| return val & 0xFFFF; |
| } |
| |
| void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx, int regval) |
| { |
| u32 addr; |
| |
| /* confirm MII not busy */ |
| if (lan7x_phy_wait_not_busy(udev)) { |
| debug("MII is busy in %s\n", __func__); |
| return; |
| } |
| |
| lan7x_write_reg(udev, MII_DATA, regval); |
| |
| /* set the address, index & direction (write to PHY) */ |
| addr = (phy_id << 11) | (idx << 6) | |
| MII_ACC_MII_WRITE | MII_ACC_MII_BUSY; |
| lan7x_write_reg(udev, MII_ACC, addr); |
| |
| if (lan7x_phy_wait_not_busy(udev)) |
| debug("Timed out writing MII reg %02X\n", idx); |
| } |
| |
| /* |
| * Lan7x phylib wrappers |
| */ |
| static int lan7x_phylib_mdio_read(struct mii_dev *bus, |
| int addr, int devad, int reg) |
| { |
| struct usb_device *udev = dev_get_parent_priv(bus->priv); |
| |
| return lan7x_mdio_read(udev, addr, reg); |
| } |
| |
| static int lan7x_phylib_mdio_write(struct mii_dev *bus, |
| int addr, int devad, int reg, u16 val) |
| { |
| struct usb_device *udev = dev_get_parent_priv(bus->priv); |
| |
| lan7x_mdio_write(udev, addr, reg, (int)val); |
| |
| return 0; |
| } |
| |
| /* |
| * Lan7x eeprom functions |
| */ |
| static int lan7x_eeprom_confirm_not_busy(struct usb_device *udev) |
| { |
| return lan7x_wait_for_bit(udev, __func__, |
| E2P_CMD, E2P_CMD_EPC_BUSY, |
| false, 100, 0); |
| } |
| |
| static int lan7x_wait_eeprom(struct usb_device *udev) |
| { |
| return lan7x_wait_for_bit(udev, __func__, |
| E2P_CMD, |
| (E2P_CMD_EPC_BUSY | E2P_CMD_EPC_TIMEOUT), |
| false, 100, 0); |
| } |
| |
| static int lan7x_read_eeprom(struct usb_device *udev, |
| u32 offset, u32 length, u8 *data) |
| { |
| u32 val; |
| int i, ret; |
| |
| ret = lan7x_eeprom_confirm_not_busy(udev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < length; i++) { |
| val = E2P_CMD_EPC_BUSY | E2P_CMD_EPC_CMD_READ | |
| (offset & E2P_CMD_EPC_ADDR_MASK); |
| lan7x_write_reg(udev, E2P_CMD, val); |
| |
| ret = lan7x_wait_eeprom(udev); |
| if (ret) |
| return ret; |
| |
| lan7x_read_reg(udev, E2P_DATA, &val); |
| data[i] = val & 0xFF; |
| offset++; |
| } |
| return ret; |
| } |
| |
| /* |
| * Lan7x phylib functions |
| */ |
| int lan7x_phylib_register(struct udevice *udev) |
| { |
| struct usb_device *usbdev = dev_get_parent_priv(udev); |
| struct lan7x_private *priv = dev_get_priv(udev); |
| int ret; |
| |
| priv->mdiobus = mdio_alloc(); |
| if (!priv->mdiobus) { |
| printf("mdio_alloc failed\n"); |
| return -ENOMEM; |
| } |
| priv->mdiobus->read = lan7x_phylib_mdio_read; |
| priv->mdiobus->write = lan7x_phylib_mdio_write; |
| sprintf(priv->mdiobus->name, |
| "lan7x_mdiobus-d%hu-p%hu", usbdev->devnum, usbdev->portnr); |
| priv->mdiobus->priv = (void *)udev; |
| |
| ret = mdio_register(priv->mdiobus); |
| if (ret) { |
| printf("mdio_register failed\n"); |
| free(priv->mdiobus); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev) |
| { |
| struct lan7x_private *priv = dev_get_priv(udev); |
| |
| priv->phydev = phy_connect(priv->mdiobus, dev->phy_id, |
| udev, PHY_INTERFACE_MODE_MII); |
| |
| if (!priv->phydev) { |
| printf("phy_connect failed\n"); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| int lan7x_eth_phylib_config_start(struct udevice *udev) |
| { |
| struct lan7x_private *priv = dev_get_priv(udev); |
| int ret; |
| |
| /* configure supported modes */ |
| priv->phydev->supported = PHY_BASIC_FEATURES | |
| SUPPORTED_1000baseT_Full | |
| SUPPORTED_Pause | |
| SUPPORTED_Asym_Pause; |
| |
| priv->phydev->advertising = ADVERTISED_10baseT_Half | |
| ADVERTISED_10baseT_Full | |
| ADVERTISED_100baseT_Half | |
| ADVERTISED_100baseT_Full | |
| ADVERTISED_1000baseT_Full | |
| ADVERTISED_Pause | |
| ADVERTISED_Asym_Pause | |
| ADVERTISED_Autoneg; |
| |
| priv->phydev->autoneg = AUTONEG_ENABLE; |
| |
| ret = genphy_config_aneg(priv->phydev); |
| if (ret) { |
| printf("genphy_config_aneg failed\n"); |
| return ret; |
| } |
| ret = phy_startup(priv->phydev); |
| if (ret) { |
| printf("phy_startup failed\n"); |
| return ret; |
| } |
| |
| debug("** %s() speed %i duplex %i adv %X supp %X\n", __func__, |
| priv->phydev->speed, priv->phydev->duplex, |
| priv->phydev->advertising, priv->phydev->supported); |
| |
| return 0; |
| } |
| |
| int lan7x_update_flowcontrol(struct usb_device *udev, |
| struct ueth_data *dev, |
| uint32_t *flow, uint32_t *fct_flow) |
| { |
| uint32_t lcladv, rmtadv; |
| u8 cap = 0; |
| struct lan7x_private *priv = dev_get_priv(udev->dev); |
| |
| debug("** %s()\n", __func__); |
| debug("** %s() priv->phydev->speed %i duplex %i\n", __func__, |
| priv->phydev->speed, priv->phydev->duplex); |
| |
| if (priv->phydev->duplex == DUPLEX_FULL) { |
| lcladv = lan7x_mdio_read(udev, dev->phy_id, MII_ADVERTISE); |
| rmtadv = lan7x_mdio_read(udev, dev->phy_id, MII_LPA); |
| cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); |
| |
| debug("TX Flow "); |
| if (cap & FLOW_CTRL_TX) { |
| *flow = (FLOW_CR_TX_FCEN | 0xFFFF); |
| /* set fct_flow thresholds to 20% and 80% */ |
| *fct_flow = ((MAX_RX_FIFO_SIZE * 2) / (10 * 512)) |
| & 0x7FUL; |
| *fct_flow <<= 8UL; |
| *fct_flow |= ((MAX_RX_FIFO_SIZE * 8) / (10 * 512)) |
| & 0x7FUL; |
| debug("EN "); |
| } else { |
| debug("DIS "); |
| } |
| debug("RX Flow "); |
| if (cap & FLOW_CTRL_RX) { |
| *flow |= FLOW_CR_RX_FCEN; |
| debug("EN"); |
| } else { |
| debug("DIS"); |
| } |
| } |
| debug("\n"); |
| return 0; |
| } |
| |
| int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev) |
| { |
| int ret; |
| |
| memset(enetaddr, 0, 6); |
| |
| ret = lan7x_read_eeprom(udev, 0, 1, enetaddr); |
| |
| if ((ret == 0) && (enetaddr[0] == EEPROM_INDICATOR)) { |
| ret = lan7x_read_eeprom(udev, |
| EEPROM_MAC_OFFSET, ETH_ALEN, |
| enetaddr); |
| if ((ret == 0) && is_valid_ethaddr(enetaddr)) { |
| /* eeprom values are valid so use them */ |
| debug("MAC address read from EEPROM %pM\n", |
| enetaddr); |
| return 0; |
| } |
| } |
| debug("MAC address read from EEPROM invalid %pM\n", enetaddr); |
| |
| memset(enetaddr, 0, 6); |
| return -EINVAL; |
| } |
| |
| int lan7x_pmt_phy_reset(struct usb_device *udev, |
| struct ueth_data *dev) |
| { |
| int ret; |
| u32 data; |
| |
| ret = lan7x_read_reg(udev, PMT_CTL, &data); |
| if (ret) |
| return ret; |
| ret = lan7x_write_reg(udev, PMT_CTL, data | PMT_CTL_PHY_RST); |
| if (ret) |
| return ret; |
| |
| /* for LAN7x, we need to check PMT_CTL_READY asserted */ |
| ret = lan7x_wait_for_bit(udev, "PMT_CTL_PHY_RST", |
| PMT_CTL, PMT_CTL_PHY_RST, |
| false, 1000, 0); /* could take over 125mS */ |
| if (ret) |
| return ret; |
| |
| return lan7x_wait_for_bit(udev, "PMT_CTL_READY", |
| PMT_CTL, PMT_CTL_READY, |
| true, 1000, 0); |
| } |
| |
| int lan7x_basic_reset(struct usb_device *udev, |
| struct ueth_data *dev) |
| { |
| int ret; |
| |
| dev->phy_id = LAN7X_INTERNAL_PHY_ID; /* fixed phy id */ |
| |
| ret = lan7x_write_reg(udev, HW_CFG, HW_CFG_LRST); |
| if (ret) |
| return ret; |
| |
| ret = lan7x_wait_for_bit(udev, "HW_CFG_LRST", |
| HW_CFG, HW_CFG_LRST, |
| false, 1000, 0); |
| if (ret) |
| return ret; |
| |
| debug("USB devnum %d portnr %d\n", udev->devnum, udev->portnr); |
| |
| return lan7x_pmt_phy_reset(udev, dev); |
| } |
| |
| void lan7x_eth_stop(struct udevice *dev) |
| { |
| debug("** %s()\n", __func__); |
| } |
| |
| int lan7x_eth_send(struct udevice *dev, void *packet, int length) |
| { |
| struct lan7x_private *priv = dev_get_priv(dev); |
| struct ueth_data *ueth = &priv->ueth; |
| int err; |
| int actual_len; |
| u32 tx_cmd_a; |
| u32 tx_cmd_b; |
| ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg, |
| PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)); |
| |
| debug("** %s(), len %d, buf %#x\n", __func__, length, |
| (unsigned int)(ulong) msg); |
| if (length > PKTSIZE) |
| return -ENOSPC; |
| |
| /* LAN7x disable all TX offload features for u-boot */ |
| tx_cmd_a = (u32) (length & TX_CMD_A_LEN_MASK) | TX_CMD_A_FCS; |
| tx_cmd_b = 0; |
| cpu_to_le32s(&tx_cmd_a); |
| cpu_to_le32s(&tx_cmd_b); |
| |
| /* prepend cmd_a and cmd_b */ |
| memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a)); |
| memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b)); |
| memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet, |
| length); |
| err = usb_bulk_msg(ueth->pusb_dev, |
| usb_sndbulkpipe(ueth->pusb_dev, ueth->ep_out), |
| (void *)msg, |
| length + sizeof(tx_cmd_a) + |
| sizeof(tx_cmd_b), |
| &actual_len, USB_BULK_SEND_TIMEOUT_MS); |
| debug("Tx: len = %u, actual = %u, err = %d\n", |
| (unsigned int)(length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)), |
| (unsigned int)actual_len, err); |
| |
| return err; |
| } |
| |
| int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct lan7x_private *priv = dev_get_priv(dev); |
| struct ueth_data *ueth = &priv->ueth; |
| uint8_t *ptr; |
| int ret, len; |
| u32 packet_len = 0; |
| u32 rx_cmd_a = 0; |
| |
| len = usb_ether_get_rx_bytes(ueth, &ptr); |
| debug("%s: first try, len=%d\n", __func__, len); |
| if (!len) { |
| if (!(flags & ETH_RECV_CHECK_DEVICE)) |
| return -EAGAIN; |
| ret = usb_ether_receive(ueth, RX_URB_SIZE); |
| if (ret == -EAGAIN) |
| return ret; |
| |
| len = usb_ether_get_rx_bytes(ueth, &ptr); |
| debug("%s: second try, len=%d\n", __func__, len); |
| } |
| |
| /* |
| * 1st 4 bytes contain the length of the actual data plus error info. |
| * Extract data length. |
| */ |
| if (len < sizeof(packet_len)) { |
| debug("Rx: incomplete packet length\n"); |
| goto err; |
| } |
| memcpy(&rx_cmd_a, ptr, sizeof(rx_cmd_a)); |
| le32_to_cpus(&rx_cmd_a); |
| if (rx_cmd_a & RX_CMD_A_RXE) { |
| debug("Rx: Error header=%#x", rx_cmd_a); |
| goto err; |
| } |
| packet_len = (u16) (rx_cmd_a & RX_CMD_A_LEN_MASK); |
| |
| if (packet_len > len - sizeof(packet_len)) { |
| debug("Rx: too large packet: %d\n", packet_len); |
| goto err; |
| } |
| |
| /* |
| * For LAN7x, the length in command A does not |
| * include command A, B, and C length. |
| * So use it as is. |
| */ |
| |
| *packetp = ptr + 10; |
| return packet_len; |
| |
| err: |
| usb_ether_advance_rxbuf(ueth, -1); |
| return -EINVAL; |
| } |
| |
| int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len) |
| { |
| struct lan7x_private *priv = dev_get_priv(dev); |
| |
| packet_len = ALIGN(packet_len, 4); |
| usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len); |
| |
| return 0; |
| } |
| |
| int lan7x_eth_remove(struct udevice *dev) |
| { |
| struct lan7x_private *priv = dev_get_priv(dev); |
| |
| debug("** %s()\n", __func__); |
| free(priv->phydev); |
| mdio_unregister(priv->mdiobus); |
| mdio_free(priv->mdiobus); |
| |
| return 0; |
| } |