blob: 93f622f291048b7808bdc32b39f2b2c05cfe01ab [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2011 Infineon Technologies
*
* Authors:
* Peter Huewe <huewe.external@infineon.com>
*
* Version: 2.1.1
*
* Description:
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
*
* It is based on the Linux kernel driver tpm.c from Leendert van
* Dorn, Dave Safford, Reiner Sailer, and Kyleen Hall.
*/
#ifndef _TPM_TIS_I2C_H
#define _TPM_TIS_I2C_H
#include <linux/compiler.h>
#include <linux/types.h>
/**
* struct tpm_tis_phy_ops - low-level TPM bus operations
*/
struct tpm_tis_phy_ops {
/* read_bytes() - Read a number of bytes from the device
*
* @udev: TPM device
* @addr: offset from device base
* @len: len to read
* @result: data read
*
* @return: 0 on success, negative on failure
*/
int (*read_bytes)(struct udevice *udev, u32 addr, u16 len,
u8 *result);
/* write_bytes() - Read a number of bytes from the device
*
* @udev: TPM device
* @addr: offset from device base
* @len: len to read
* @value: data to write
*
* @return: 0 on success, negative on failure
*/
int (*write_bytes)(struct udevice *udev, u32 addr, u16 len,
const u8 *value);
/* read32() - Read a 32bit value of the device
*
* @udev: TPM device
* @addr: offset from device base
* @result: data read
*
* @return: 0 on success, negative on failure
*/
int (*read32)(struct udevice *udev, u32 addr, u32 *result);
/* write32() - write a 32bit value to the device
*
* @udev: TPM device
* @addr: offset from device base
* @src: data to write
*
* @return: 0 on success, negative on failure
*/
int (*write32)(struct udevice *udev, u32 addr, u32 src);
};
enum tis_int_flags {
TPM_GLOBAL_INT_ENABLE = 0x80000000,
TPM_INTF_BURST_COUNT_STATIC = 0x100,
TPM_INTF_CMD_READY_INT = 0x080,
TPM_INTF_INT_EDGE_FALLING = 0x040,
TPM_INTF_INT_EDGE_RISING = 0x020,
TPM_INTF_INT_LEVEL_LOW = 0x010,
TPM_INTF_INT_LEVEL_HIGH = 0x008,
TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
TPM_INTF_STS_VALID_INT = 0x002,
TPM_INTF_DATA_AVAIL_INT = 0x001,
};
#define TPM_ACCESS(l) (0x0000 | ((l) << 12))
#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12))
#define TPM_STS(l) (0x0018 | ((l) << 12))
#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
#define TPM_DID_VID(l) (0x0f00 | ((l) << 12))
#define TPM_RID(l) (0x0f04 | ((l) << 12))
#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
enum tpm_timeout {
TPM_TIMEOUT_MS = 5,
TIS_SHORT_TIMEOUT_MS = 750,
TIS_LONG_TIMEOUT_MS = 2000,
SLEEP_DURATION_US = 60,
SLEEP_DURATION_LONG_US = 210,
};
/* Size of external transmit buffer (used in tpm_transmit)*/
#define TPM_BUFSIZE 4096
/* Index of Count field in TPM response buffer */
#define TPM_RSP_SIZE_BYTE 2
#define TPM_RSP_RC_BYTE 6
struct tpm_chip {
int is_open;
int locality;
u32 vend_dev;
u8 rid;
unsigned long timeout_a, timeout_b, timeout_c, timeout_d; /* msec */
ulong chip_type;
struct tpm_tis_phy_ops *phy_ops;
};
struct tpm_input_header {
__be16 tag;
__be32 length;
__be32 ordinal;
} __packed;
struct tpm_output_header {
__be16 tag;
__be32 length;
__be32 return_code;
} __packed;
struct timeout_t {
__be32 a;
__be32 b;
__be32 c;
__be32 d;
} __packed;
struct duration_t {
__be32 tpm_short;
__be32 tpm_medium;
__be32 tpm_long;
} __packed;
union cap_t {
struct timeout_t timeout;
struct duration_t duration;
};
struct tpm_getcap_params_in {
__be32 cap;
__be32 subcap_size;
__be32 subcap;
} __packed;
struct tpm_getcap_params_out {
__be32 cap_size;
union cap_t cap;
} __packed;
union tpm_cmd_header {
struct tpm_input_header in;
struct tpm_output_header out;
};
union tpm_cmd_params {
struct tpm_getcap_params_out getcap_out;
struct tpm_getcap_params_in getcap_in;
};
struct tpm_cmd_t {
union tpm_cmd_header header;
union tpm_cmd_params params;
} __packed;
/* Max number of iterations after i2c NAK */
#define MAX_COUNT 3
#ifndef __TPM_V2_H
/*
* Max number of iterations after i2c NAK for 'long' commands
*
* We need this especially for sending TPM_READY, since the cleanup after the
* transtion to the ready state may take some time, but it is unpredictable
* how long it will take.
*/
#define MAX_COUNT_LONG 50
enum tis_access {
TPM_ACCESS_VALID = 0x80,
TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
TPM_ACCESS_REQUEST_PENDING = 0x04,
TPM_ACCESS_REQUEST_USE = 0x02,
};
enum tis_status {
TPM_STS_VALID = 0x80,
TPM_STS_COMMAND_READY = 0x40,
TPM_STS_GO = 0x20,
TPM_STS_DATA_AVAIL = 0x10,
TPM_STS_DATA_EXPECT = 0x08,
};
#endif
/**
* tpm_tis_open - Open the device and request locality 0
*
* @dev: TPM device
*
* @return: 0 on success, negative on failure
*/
int tpm_tis_open(struct udevice *udev);
/**
* tpm_tis_close - Close the device and release locality
*
* @dev: TPM device
*
* @return: 0 on success, negative on failure
*/
int tpm_tis_close(struct udevice *udev);
/** tpm_tis_cleanup - Get the device in ready state and release locality
*
* @dev: TPM device
*
* @return: always 0
*/
int tpm_tis_cleanup(struct udevice *udev);
/**
* tpm_tis_send - send data to the device
*
* @dev: TPM device
* @buf: buffer to send
* @len: size of the buffer
*
* @return: number of bytes sent or negative on failure
*/
int tpm_tis_send(struct udevice *udev, const u8 *buf, size_t len);
/**
* tpm_tis_recv_data - Receive data from a device. Wrapper for tpm_tis_recv
*
* @dev: TPM device
* @buf: buffer to copy data
* @size: buffer size
*
* @return: bytes read or negative on failure
*/
int tpm_tis_recv(struct udevice *udev, u8 *buf, size_t count);
/**
* tpm_tis_get_desc - Get the TPM description
*
* @dev: TPM device
* @buf: buffer to fill data
* @size: buffer size
*
* @return: Number of characters written (or would have been written) in buffer
*/
int tpm_tis_get_desc(struct udevice *udev, char *buf, int size);
/**
* tpm_tis_init - inititalize the device
*
* @dev: TPM device
*
* @return: 0 on success, negative on failure
*/
int tpm_tis_init(struct udevice *udev);
/**
* tpm_tis_ops_register - register the PHY ops for the device
*
* @dev: TPM device
* @ops: tpm_tis_phy_ops ops for the device
*/
void tpm_tis_ops_register(struct udevice *udev, struct tpm_tis_phy_ops *ops);
#endif