| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * National Semiconductor PHY drivers |
| * |
| * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| * author Andy Fleming |
| */ |
| #include <common.h> |
| #include <phy.h> |
| |
| /* NatSemi DP83630 */ |
| |
| #define DP83630_PHY_PAGESEL_REG 0x13 |
| #define DP83630_PHY_PTP_COC_REG 0x14 |
| #define DP83630_PHY_PTP_CLKOUT_EN (1<<15) |
| #define DP83630_PHY_RBR_REG 0x17 |
| |
| static int dp83630_config(struct phy_device *phydev) |
| { |
| int ptp_coc_reg; |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| phy_write(phydev, MDIO_DEVAD_NONE, DP83630_PHY_PAGESEL_REG, 0x6); |
| ptp_coc_reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| DP83630_PHY_PTP_COC_REG); |
| ptp_coc_reg &= ~DP83630_PHY_PTP_CLKOUT_EN; |
| phy_write(phydev, MDIO_DEVAD_NONE, DP83630_PHY_PTP_COC_REG, |
| ptp_coc_reg); |
| phy_write(phydev, MDIO_DEVAD_NONE, DP83630_PHY_PAGESEL_REG, 0); |
| |
| genphy_config_aneg(phydev); |
| |
| return 0; |
| } |
| |
| U_BOOT_PHY_DRIVER(dp83630) = { |
| .name = "NatSemi DP83630", |
| .uid = 0x20005ce1, |
| .mask = 0xfffffff0, |
| .features = PHY_BASIC_FEATURES, |
| .config = &dp83630_config, |
| .startup = &genphy_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| |
| /* DP83865 Link and Auto-Neg Status Register */ |
| #define MIIM_DP83865_LANR 0x11 |
| #define MIIM_DP83865_SPD_MASK 0x0018 |
| #define MIIM_DP83865_SPD_1000 0x0010 |
| #define MIIM_DP83865_SPD_100 0x0008 |
| #define MIIM_DP83865_DPX_FULL 0x0002 |
| |
| |
| /* NatSemi DP83865 */ |
| static int dp838xx_config(struct phy_device *phydev) |
| { |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| genphy_config_aneg(phydev); |
| |
| return 0; |
| } |
| |
| static int dp83865_parse_status(struct phy_device *phydev) |
| { |
| int mii_reg; |
| |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_DP83865_LANR); |
| |
| switch (mii_reg & MIIM_DP83865_SPD_MASK) { |
| |
| case MIIM_DP83865_SPD_1000: |
| phydev->speed = SPEED_1000; |
| break; |
| |
| case MIIM_DP83865_SPD_100: |
| phydev->speed = SPEED_100; |
| break; |
| |
| default: |
| phydev->speed = SPEED_10; |
| break; |
| |
| } |
| |
| if (mii_reg & MIIM_DP83865_DPX_FULL) |
| phydev->duplex = DUPLEX_FULL; |
| else |
| phydev->duplex = DUPLEX_HALF; |
| |
| return 0; |
| } |
| |
| static int dp83865_startup(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = genphy_update_link(phydev); |
| if (ret) |
| return ret; |
| |
| return dp83865_parse_status(phydev); |
| } |
| |
| |
| U_BOOT_PHY_DRIVER(dp83865) = { |
| .name = "NatSemi DP83865", |
| .uid = 0x20005c70, |
| .mask = 0xfffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &dp838xx_config, |
| .startup = &dp83865_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| /* NatSemi DP83848 */ |
| static int dp83848_parse_status(struct phy_device *phydev) |
| { |
| int mii_reg; |
| |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); |
| |
| if(mii_reg & (BMSR_100FULL | BMSR_100HALF)) { |
| phydev->speed = SPEED_100; |
| } else { |
| phydev->speed = SPEED_10; |
| } |
| |
| if (mii_reg & (BMSR_10FULL | BMSR_100FULL)) { |
| phydev->duplex = DUPLEX_FULL; |
| } else { |
| phydev->duplex = DUPLEX_HALF; |
| } |
| |
| return 0; |
| } |
| |
| static int dp83848_startup(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = genphy_update_link(phydev); |
| if (ret) |
| return ret; |
| |
| return dp83848_parse_status(phydev); |
| } |
| |
| U_BOOT_PHY_DRIVER(dp83848) = { |
| .name = "NatSemi DP83848", |
| .uid = 0x20005c90, |
| .mask = 0x2000ff90, |
| .features = PHY_BASIC_FEATURES, |
| .config = &dp838xx_config, |
| .startup = &dp83848_startup, |
| .shutdown = &genphy_shutdown, |
| }; |