| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Toggles a GPIO pin to power down a device |
| * |
| * Created using the Linux driver as reference, which |
| * has been written by: |
| * |
| * Jamie Lentin <jm@lentin.co.uk> |
| * Andrew Lunn <andrew@lunn.ch> |
| * |
| * Copyright (C) 2012 Jamie Lentin |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <sysreset.h> |
| |
| #include <asm/gpio.h> |
| #include <linux/delay.h> |
| |
| struct poweroff_gpio_info { |
| struct gpio_desc gpio; |
| u32 active_delay_ms; |
| u32 inactive_delay_ms; |
| u32 timeout_ms; |
| }; |
| |
| static int poweroff_gpio_request(struct udevice *dev, enum sysreset_t type) |
| { |
| struct poweroff_gpio_info *priv = dev_get_priv(dev); |
| int r; |
| |
| if (type != SYSRESET_POWER_OFF) |
| return -EPROTONOSUPPORT; |
| |
| debug("GPIO poweroff\n"); |
| |
| /* drive it active, also inactive->active edge */ |
| r = dm_gpio_set_value(&priv->gpio, 1); |
| if (r < 0) |
| return r; |
| mdelay(priv->active_delay_ms); |
| |
| /* drive inactive, also active->inactive edge */ |
| r = dm_gpio_set_value(&priv->gpio, 0); |
| if (r < 0) |
| return r; |
| mdelay(priv->inactive_delay_ms); |
| |
| /* drive it active, also inactive->active edge */ |
| r = dm_gpio_set_value(&priv->gpio, 1); |
| if (r < 0) |
| return r; |
| |
| /* give it some time */ |
| mdelay(priv->timeout_ms); |
| |
| return -EINPROGRESS; |
| } |
| |
| static int poweroff_gpio_probe(struct udevice *dev) |
| { |
| struct poweroff_gpio_info *priv = dev_get_priv(dev); |
| int flags; |
| |
| flags = dev_read_bool(dev, "input") ? GPIOD_IS_IN : GPIOD_IS_OUT; |
| priv->active_delay_ms = dev_read_u32_default(dev, "active-delay-ms", 100); |
| priv->inactive_delay_ms = dev_read_u32_default(dev, "inactive-delay-ms", 100); |
| priv->timeout_ms = dev_read_u32_default(dev, "timeout-ms", 3000); |
| |
| return gpio_request_by_name(dev, "gpios", 0, &priv->gpio, flags); |
| } |
| |
| static struct sysreset_ops poweroff_gpio_ops = { |
| .request = poweroff_gpio_request, |
| }; |
| |
| static const struct udevice_id poweroff_gpio_ids[] = { |
| { .compatible = "gpio-poweroff", }, |
| {}, |
| }; |
| |
| U_BOOT_DRIVER(poweroff_gpio) = { |
| .name = "poweroff-gpio", |
| .id = UCLASS_SYSRESET, |
| .ops = &poweroff_gpio_ops, |
| .probe = poweroff_gpio_probe, |
| .priv_auto = sizeof(struct poweroff_gpio_info), |
| .of_match = poweroff_gpio_ids, |
| }; |