| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2014-2015 Samsung Electronics |
| * Przemyslaw Marczak <p.marczak@samsung.com> |
| */ |
| #include <common.h> |
| #include <command.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <dm/uclass-internal.h> |
| #include <linux/printk.h> |
| #include <power/regulator.h> |
| |
| #define LIMIT_DEVNAME 20 |
| #define LIMIT_OFNAME 32 |
| #define LIMIT_INFO 18 |
| |
| static struct udevice *currdev; |
| |
| static int failure(int ret) |
| { |
| printf("Error: %d (%s)\n", ret, errno_str(ret)); |
| |
| return CMD_RET_FAILURE; |
| } |
| |
| static int do_dev(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| struct dm_regulator_uclass_plat *uc_pdata; |
| const char *name; |
| int ret = -ENXIO; |
| |
| switch (argc) { |
| case 2: |
| name = argv[1]; |
| ret = regulator_get_by_platname(name, &currdev); |
| if (ret) { |
| printf("Can't get the regulator: %s!\n", name); |
| return failure(ret); |
| } |
| fallthrough; |
| case 1: |
| if (!currdev) { |
| printf("Regulator device is not set!\n\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| uc_pdata = dev_get_uclass_plat(currdev); |
| if (!uc_pdata) { |
| printf("%s: no regulator platform data!\n", currdev->name); |
| return failure(ret); |
| } |
| |
| printf("dev: %s @ %s\n", uc_pdata->name, currdev->name); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int curr_dev_and_plat(struct udevice **devp, |
| struct dm_regulator_uclass_plat **uc_pdata, |
| bool allow_type_fixed) |
| { |
| *devp = NULL; |
| *uc_pdata = NULL; |
| |
| if (!currdev) { |
| printf("First, set the regulator device!\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| *devp = currdev; |
| |
| *uc_pdata = dev_get_uclass_plat(*devp); |
| if (!*uc_pdata) { |
| pr_err("Regulator: %s - missing platform data!\n", currdev->name); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (!allow_type_fixed && (*uc_pdata)->type == REGULATOR_TYPE_FIXED) { |
| printf("Operation not allowed for fixed regulator!\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_list(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct dm_regulator_uclass_plat *uc_pdata; |
| struct udevice *dev; |
| int ret; |
| |
| printf("| %-*.*s| %-*.*s| %s\n", |
| LIMIT_DEVNAME, LIMIT_DEVNAME, "Device", |
| LIMIT_OFNAME, LIMIT_OFNAME, "regulator-name", |
| "Parent"); |
| |
| for (ret = uclass_find_first_device(UCLASS_REGULATOR, &dev); dev; |
| ret = uclass_find_next_device(&dev)) { |
| if (ret) |
| continue; |
| |
| uc_pdata = dev_get_uclass_plat(dev); |
| printf("| %-*.*s| %-*.*s| %s\n", |
| LIMIT_DEVNAME, LIMIT_DEVNAME, dev->name, |
| LIMIT_OFNAME, LIMIT_OFNAME, uc_pdata->name, |
| dev->parent->name); |
| } |
| |
| return ret; |
| } |
| |
| static int constraint(const char *name, int val, const char *val_name) |
| { |
| printf("%-*s", LIMIT_INFO, name); |
| if (val < 0) { |
| printf(" %s (err: %d)\n", errno_str(val), val); |
| return val; |
| } |
| |
| if (val_name) |
| printf(" %d (%s)\n", val, val_name); |
| else |
| printf(" %d\n", val); |
| |
| return 0; |
| } |
| |
| static const char *get_mode_name(struct dm_regulator_mode *mode, |
| int mode_count, |
| int mode_id) |
| { |
| while (mode_count--) { |
| if (mode->id == mode_id) |
| return mode->name; |
| mode++; |
| } |
| |
| return NULL; |
| } |
| |
| static int do_info(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct udevice *dev; |
| struct dm_regulator_uclass_plat *uc_pdata; |
| struct dm_regulator_mode *modes; |
| const char *parent_uc; |
| int mode_count; |
| int ret; |
| int i; |
| |
| ret = curr_dev_and_plat(&dev, &uc_pdata, true); |
| if (ret) |
| return ret; |
| |
| parent_uc = dev_get_uclass_name(dev->parent); |
| |
| printf("%s\n%-*s %s\n%-*s %s\n%-*s %s\n%-*s %s\n%-*s\n", |
| "Regulator info:", |
| LIMIT_INFO, "* regulator-name:", uc_pdata->name, |
| LIMIT_INFO, "* device name:", dev->name, |
| LIMIT_INFO, "* parent name:", dev->parent->name, |
| LIMIT_INFO, "* parent uclass:", parent_uc, |
| LIMIT_INFO, "* constraints:"); |
| |
| constraint(" - min uV:", uc_pdata->min_uV, NULL); |
| constraint(" - max uV:", uc_pdata->max_uV, NULL); |
| constraint(" - min uA:", uc_pdata->min_uA, NULL); |
| constraint(" - max uA:", uc_pdata->max_uA, NULL); |
| constraint(" - always on:", uc_pdata->always_on, |
| uc_pdata->always_on ? "true" : "false"); |
| constraint(" - boot on:", uc_pdata->boot_on, |
| uc_pdata->boot_on ? "true" : "false"); |
| |
| mode_count = regulator_mode(dev, &modes); |
| constraint("* op modes:", mode_count, NULL); |
| |
| for (i = 0; i < mode_count; i++, modes++) |
| constraint(" - mode id:", modes->id, modes->name); |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static void do_status_detail(struct udevice *dev, |
| struct dm_regulator_uclass_plat *uc_pdata) |
| { |
| int current, value, mode; |
| const char *mode_name; |
| bool enabled; |
| |
| printf("Regulator %s status:\n", uc_pdata->name); |
| |
| enabled = regulator_get_enable(dev); |
| constraint(" * enable:", enabled, enabled ? "true" : "false"); |
| |
| value = regulator_get_value(dev); |
| constraint(" * value uV:", value, NULL); |
| |
| current = regulator_get_current(dev); |
| constraint(" * current uA:", current, NULL); |
| |
| mode = regulator_get_mode(dev); |
| mode_name = get_mode_name(uc_pdata->mode, uc_pdata->mode_count, mode); |
| constraint(" * mode id:", mode, mode_name); |
| } |
| |
| static void do_status_line(struct udevice *dev, int status) |
| { |
| struct dm_regulator_uclass_plat *pdata; |
| int current, value, mode; |
| const char *mode_name; |
| bool enabled; |
| |
| pdata = dev_get_uclass_plat(dev); |
| enabled = regulator_get_enable(dev); |
| value = regulator_get_value(dev); |
| current = regulator_get_current(dev); |
| mode = regulator_get_mode(dev); |
| mode_name = get_mode_name(pdata->mode, pdata->mode_count, mode); |
| printf("%-20s %-10s ", pdata->name, enabled ? "enabled" : "disabled"); |
| if (value >= 0) |
| printf("%10d ", value); |
| else |
| printf("%10s ", "-"); |
| if (current >= 0) |
| printf("%10d ", current); |
| else |
| printf("%10s ", "-"); |
| if (mode >= 0) |
| printf("%-10s", mode_name); |
| else |
| printf("%-10s", "-"); |
| printf(" %i", status); |
| printf("\n"); |
| } |
| |
| static int do_status(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct dm_regulator_uclass_plat *uc_pdata; |
| struct udevice *dev; |
| int ret; |
| |
| if (currdev && (argc < 2 || strcmp(argv[1], "-a"))) { |
| ret = curr_dev_and_plat(&dev, &uc_pdata, true); |
| if (ret) |
| return CMD_RET_FAILURE; |
| do_status_detail(dev, uc_pdata); |
| return 0; |
| } |
| |
| /* Show all of them in a list, probing them as needed */ |
| printf("%-20s %-10s %10s %10s %-10s %s\n", "Name", "Enabled", "uV", "mA", |
| "Mode", "Status"); |
| for (ret = uclass_first_device_check(UCLASS_REGULATOR, &dev); dev; |
| ret = uclass_next_device_check(&dev)) |
| do_status_line(dev, ret); |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_value(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct udevice *dev; |
| struct dm_regulator_uclass_plat *uc_pdata; |
| int value; |
| int force; |
| int ret; |
| |
| ret = curr_dev_and_plat(&dev, &uc_pdata, argc == 1); |
| if (ret) |
| return ret; |
| |
| if (argc == 1) { |
| ret = regulator_get_value(dev); |
| if (ret < 0) { |
| printf("Regulator: %s - can't get the Voltage!\n", |
| uc_pdata->name); |
| return failure(ret); |
| } |
| |
| printf("%d uV\n", ret); |
| return CMD_RET_SUCCESS; |
| } |
| |
| if (argc == 3) |
| force = !strcmp("-f", argv[2]); |
| else |
| force = 0; |
| |
| value = simple_strtoul(argv[1], NULL, 0); |
| if ((value < uc_pdata->min_uV || value > uc_pdata->max_uV) && !force) { |
| printf("Value exceeds regulator constraint limits %d..%d uV\n", |
| uc_pdata->min_uV, uc_pdata->max_uV); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (!force) |
| ret = regulator_set_value(dev, value); |
| else |
| ret = regulator_set_value_force(dev, value); |
| if (ret) { |
| printf("Regulator: %s - can't set the Voltage!\n", |
| uc_pdata->name); |
| return failure(ret); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_current(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct udevice *dev; |
| struct dm_regulator_uclass_plat *uc_pdata; |
| int current; |
| int ret; |
| |
| ret = curr_dev_and_plat(&dev, &uc_pdata, argc == 1); |
| if (ret) |
| return ret; |
| |
| if (argc == 1) { |
| ret = regulator_get_current(dev); |
| if (ret < 0) { |
| printf("Regulator: %s - can't get the Current!\n", |
| uc_pdata->name); |
| return failure(ret); |
| } |
| |
| printf("%d uA\n", ret); |
| return CMD_RET_SUCCESS; |
| } |
| |
| current = simple_strtoul(argv[1], NULL, 0); |
| if (current < uc_pdata->min_uA || current > uc_pdata->max_uA) { |
| printf("Current exceeds regulator constraint limits\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| ret = regulator_set_current(dev, current); |
| if (ret) { |
| printf("Regulator: %s - can't set the Current!\n", |
| uc_pdata->name); |
| return failure(ret); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_mode(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct udevice *dev; |
| struct dm_regulator_uclass_plat *uc_pdata; |
| int mode; |
| int ret; |
| |
| ret = curr_dev_and_plat(&dev, &uc_pdata, false); |
| if (ret) |
| return ret; |
| |
| if (argc == 1) { |
| ret = regulator_get_mode(dev); |
| if (ret < 0) { |
| printf("Regulator: %s - can't get the operation mode!\n", |
| uc_pdata->name); |
| return failure(ret); |
| } |
| |
| printf("mode id: %d\n", ret); |
| return CMD_RET_SUCCESS; |
| } |
| |
| mode = simple_strtoul(argv[1], NULL, 0); |
| |
| ret = regulator_set_mode(dev, mode); |
| if (ret) { |
| printf("Regulator: %s - can't set the operation mode!\n", |
| uc_pdata->name); |
| return failure(ret); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_enable(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct udevice *dev; |
| struct dm_regulator_uclass_plat *uc_pdata; |
| int ret; |
| |
| ret = curr_dev_and_plat(&dev, &uc_pdata, true); |
| if (ret) |
| return ret; |
| |
| ret = regulator_set_enable(dev, true); |
| if (ret) { |
| printf("Regulator: %s - can't enable!\n", uc_pdata->name); |
| return failure(ret); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_disable(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct udevice *dev; |
| struct dm_regulator_uclass_plat *uc_pdata; |
| int ret; |
| |
| ret = curr_dev_and_plat(&dev, &uc_pdata, true); |
| if (ret) |
| return ret; |
| |
| ret = regulator_set_enable(dev, false); |
| if (ret) { |
| printf("Regulator: %s - can't disable!\n", uc_pdata->name); |
| return failure(ret); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static struct cmd_tbl subcmd[] = { |
| U_BOOT_CMD_MKENT(dev, 2, 1, do_dev, "", ""), |
| U_BOOT_CMD_MKENT(list, 1, 1, do_list, "", ""), |
| U_BOOT_CMD_MKENT(info, 2, 1, do_info, "", ""), |
| U_BOOT_CMD_MKENT(status, 2, 1, do_status, "", ""), |
| U_BOOT_CMD_MKENT(value, 3, 1, do_value, "", ""), |
| U_BOOT_CMD_MKENT(current, 3, 1, do_current, "", ""), |
| U_BOOT_CMD_MKENT(mode, 2, 1, do_mode, "", ""), |
| U_BOOT_CMD_MKENT(enable, 1, 1, do_enable, "", ""), |
| U_BOOT_CMD_MKENT(disable, 1, 1, do_disable, "", ""), |
| }; |
| |
| static int do_regulator(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct cmd_tbl *cmd; |
| |
| argc--; |
| argv++; |
| |
| cmd = find_cmd_tbl(argv[0], subcmd, ARRAY_SIZE(subcmd)); |
| if (cmd == NULL || argc > cmd->maxargs) |
| return CMD_RET_USAGE; |
| |
| return cmd->cmd(cmdtp, flag, argc, argv); |
| } |
| |
| U_BOOT_CMD(regulator, CONFIG_SYS_MAXARGS, 1, do_regulator, |
| "uclass operations", |
| "list - list UCLASS regulator devices\n" |
| "regulator dev [regulator-name] - show/[set] operating regulator device\n" |
| "regulator info - print constraints info\n" |
| "regulator status [-a] - print operating status [for all]\n" |
| "regulator value [val] [-f] - print/[set] voltage value [uV] (force)\n" |
| "regulator current [val] - print/[set] current value [uA]\n" |
| "regulator mode [id] - print/[set] operating mode id\n" |
| "regulator enable - enable the regulator output\n" |
| "regulator disable - disable the regulator output\n" |
| ); |