blob: 9bc475475dfd0ec17f3d06f4ede922383581c383 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2013-2016 Freescale Semiconductor, Inc.
* Copyright 2017, 2023 NXP
*/
#ifndef _FSL_DPNI_H
#define _FSL_DPNI_H
/* DPNI Version */
#define DPNI_VER_MAJOR 7
#define DPNI_VER_MINOR 3
/* Command IDs */
#define DPNI_CMDID_OPEN 0x8011
#define DPNI_CMDID_CLOSE 0x8001
#define DPNI_CMDID_CREATE 0x9011
#define DPNI_CMDID_DESTROY 0x9811
#define DPNI_CMDID_GET_API_VERSION 0xa011
#define DPNI_CMDID_ENABLE 0x0021
#define DPNI_CMDID_DISABLE 0x0031
#define DPNI_CMDID_GET_ATTR 0x0041
#define DPNI_CMDID_RESET 0x0051
#define DPNI_CMDID_SET_POOLS 0x2002
#define DPNI_CMDID_SET_BUFFER_LAYOUT 0x2651
#define DPNI_CMDID_GET_QDID 0x2101
#define DPNI_CMDID_GET_TX_DATA_OFFSET 0x2121
#define DPNI_CMDID_GET_LINK_STATE 0x2151
#define DPNI_CMDID_SET_LINK_CFG 0x21A1
#define DPNI_CMDID_ADD_MAC_ADDR 0x2261
#define DPNI_CMDID_GET_STATISTICS 0x25D1
#define DPNI_CMDID_GET_QUEUE 0x25F1
#define DPNI_CMDID_SET_QUEUE 0x2601
#define DPNI_CMDID_SET_TX_CONFIRMATION_MODE 0x2661
/* Macros for accessing command fields smaller than 1byte */
#define DPNI_MASK(field) \
GENMASK(DPNI_##field##_SHIFT + DPNI_##field##_SIZE - 1, \
DPNI_##field##_SHIFT)
#define dpni_set_field(var, field, val) \
((var) |= (((val) << DPNI_##field##_SHIFT) & DPNI_MASK(field)))
#define dpni_get_field(var, field) \
(((var) & DPNI_MASK(field)) >> DPNI_##field##_SHIFT)
#pragma pack(push, 1)
struct dpni_cmd_open {
__le32 dpni_id;
};
struct dpni_cmd_create {
__le32 options;
u8 num_queues;
u8 num_tcs;
u8 mac_filter_entries;
u8 num_channels;
u8 vlan_filter_entries;
u8 pad2;
u8 qos_entries;
u8 pad3;
__le16 fs_entries;
u8 num_rx_tcs;
u8 pad4;
u8 num_cgs;
__le16 num_opr;
u8 dist_key_size;
};
struct dpni_cmd_destroy {
__le32 dpni_id;
};
#define DPNI_BACKUP_POOL(val, order) (((val) & 0x1) << (order))
struct dpni_cmd_pool {
__le16 dpbp_id;
u8 priority_mask;
u8 pad;
};
struct dpni_cmd_set_pools {
u8 num_dpbp;
u8 backup_pool_mask;
u8 pad;
u8 pool_options;
struct dpni_cmd_pool pool[8];
__le16 buffer_size[8];
};
struct dpni_rsp_get_attr {
/* response word 0 */
__le32 options;
u8 num_queues;
u8 num_rx_tcs;
u8 mac_filter_entries;
u8 num_tx_tcs;
/* response word 1 */
u8 vlan_filter_entries;
u8 num_channels;
u8 qos_entries;
u8 pad2;
__le16 fs_entries;
__le16 num_opr;
/* response word 2 */
u8 qos_key_size;
u8 fs_key_size;
__le16 wriop_version;
u8 num_cgs;
};
/* There are 3 separate commands for configuring Rx, Tx and Tx confirmation
* buffer layouts, but they all share the same parameters.
* If one of the functions changes, below structure needs to be split.
*/
#define DPNI_PASS_TS_SHIFT 0
#define DPNI_PASS_TS_SIZE 1
#define DPNI_PASS_PR_SHIFT 1
#define DPNI_PASS_PR_SIZE 1
#define DPNI_PASS_FS_SHIFT 2
#define DPNI_PASS_FS_SIZE 1
#define DPNI_PASS_SWO_SHIFT 3
#define DPNI_PASS_SWO_SIZE 1
struct dpni_cmd_set_buffer_layout {
/* cmd word 0 */
u8 qtype;
u8 pad0[3];
__le16 options;
/* from LSB: pass_timestamp:1, parser_result:1, frame_status:1 */
u8 flags;
u8 pad1;
/* cmd word 1 */
__le16 private_data_size;
__le16 data_align;
__le16 head_room;
__le16 tail_room;
};
struct dpni_cmd_get_qdid {
u8 qtype;
};
struct dpni_rsp_get_qdid {
__le16 qdid;
};
struct dpni_rsp_get_tx_data_offset {
__le16 data_offset;
};
struct dpni_cmd_set_link_cfg {
__le64 pad0;
__le32 rate;
__le32 pad1;
__le64 options;
__le64 advertising;
};
#define DPNI_LINK_STATE_SHIFT 0
#define DPNI_LINK_STATE_SIZE 1
#define DPNI_STATE_VALID_SHIFT 1
#define DPNI_STATE_VALID_SIZE 1
struct dpni_rsp_get_link_state {
__le32 pad0;
/* from LSB: up:1 */
u8 flags;
u8 pad1[3];
__le32 rate;
__le32 pad2;
__le64 options;
__le64 supported;
__le64 advertising;
};
struct dpni_cmd_add_mac_addr {
u8 flags;
u8 pad;
u8 mac_addr[6];
u8 tc_id;
u8 fq_id;
};
struct dpni_cmd_get_queue {
u8 qtype;
u8 tc;
u8 index;
u8 channel_id;
};
#define DPNI_DEST_TYPE_SHIFT 0
#define DPNI_DEST_TYPE_SIZE 4
#define DPNI_CGID_VALID_SHIFT 5
#define DPNI_CGID_VALID_SIZE 1
#define DPNI_STASH_CTRL_SHIFT 6
#define DPNI_STASH_CTRL_SIZE 1
#define DPNI_HOLD_ACTIVE_SHIFT 7
#define DPNI_HOLD_ACTIVE_SIZE 1
struct dpni_rsp_get_queue {
/* response word 0 */
__le64 pad0;
/* response word 1 */
__le32 dest_id;
__le16 pad1;
u8 dest_prio;
/* From LSB: dest_type:4, pad:1, cgid_valid:1, flc_stash_ctrl:1, hold_active:1 */
u8 flags;
/* response word 2 */
__le64 flc;
/* response word 3 */
__le64 user_context;
/* response word 4 */
__le32 fqid;
__le16 qdbin;
__le16 pad2;
/* response word 5*/
u8 cgid;
};
struct dpni_cmd_set_queue {
/* cmd word 0 */
u8 qtype;
u8 tc;
u8 index;
u8 options;
__le32 pad0;
/* cmd word 1 */
__le32 dest_id;
__le16 pad1;
u8 dest_prio;
u8 flags;
/* cmd word 2 */
__le64 flc;
/* cmd word 3 */
__le64 user_context;
/* cmd word 4 */
u8 cgid;
u8 channel_id;
};
struct dpni_tx_confirmation_mode {
u8 ceetm_ch_idx;
u8 pad1;
__le16 pad2;
u8 confirmation_mode;
};
struct dpni_cmd_get_statistics {
u8 page_number;
__le16 param;
};
struct dpni_rsp_get_statistics {
__le64 counter[7];
};
#pragma pack(pop)
/**
* Data Path Network Interface API
* Contains initialization APIs and runtime control APIs for DPNI
*/
struct fsl_mc_io;
/* General DPNI macros */
/* Maximum number of traffic classes */
#define DPNI_MAX_TC 8
/* Maximum number of buffer pools per DPNI */
#define DPNI_MAX_DPBP 8
/* All traffic classes considered; see dpni_set_rx_flow() */
#define DPNI_ALL_TCS (u8)(-1)
/* All flows within traffic class considered; see dpni_set_rx_flow() */
#define DPNI_ALL_TC_FLOWS (u16)(-1)
/* Generate new flow ID; see dpni_set_tx_flow() */
#define DPNI_NEW_FLOW_ID (u16)(-1)
/* use for common tx-conf queue; see dpni_set_tx_conf_<x>() */
#define DPNI_COMMON_TX_CONF (u16)(-1)
int dpni_open(struct fsl_mc_io *mc_io, u32 cmd_flags, int dpni_id, u16 *token);
int dpni_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
/* DPNI configuration options */
/**
* Allow different distribution key profiles for different traffic classes;
* if not set, a single key profile is assumed
*/
#define DPNI_OPT_ALLOW_DIST_KEY_PER_TC 0x00000001
/**
* Disable all non-error transmit confirmation; error frames are reported
* back to a common Tx error queue
*/
#define DPNI_OPT_TX_CONF_DISABLED 0x00000002
/* Disable per-sender private Tx confirmation/error queue */
#define DPNI_OPT_PRIVATE_TX_CONF_ERROR_DISABLED 0x00000004
/**
* Support distribution based on hashed key;
* allows statistical distribution over receive queues in a traffic class
*/
#define DPNI_OPT_DIST_HASH 0x00000010
/**
* Support distribution based on flow steering;
* allows explicit control of distribution over receive queues in a traffic
* class
*/
#define DPNI_OPT_DIST_FS 0x00000020
/* Unicast filtering support */
#define DPNI_OPT_UNICAST_FILTER 0x00000080
/* Multicast filtering support */
#define DPNI_OPT_MULTICAST_FILTER 0x00000100
/* VLAN filtering support */
#define DPNI_OPT_VLAN_FILTER 0x00000200
/* Support IP reassembly on received packets */
#define DPNI_OPT_IPR 0x00000800
/* Support IP fragmentation on transmitted packets */
#define DPNI_OPT_IPF 0x00001000
/* VLAN manipulation support */
#define DPNI_OPT_VLAN_MANIPULATION 0x00010000
/* Support masking of QoS lookup keys */
#define DPNI_OPT_QOS_MASK_SUPPORT 0x00020000
/* Support masking of Flow Steering lookup keys */
#define DPNI_OPT_FS_MASK_SUPPORT 0x00040000
/**
* enum dpni_queue_type - Identifies a type of queue targeted by the command
* @DPNI_QUEUE_RX: Rx queue
* @DPNI_QUEUE_TX: Tx queue
* @DPNI_QUEUE_TX_CONFIRM: Tx confirmation queue
* @DPNI_QUEUE_RX_ERR: Rx error queue
*/
enum dpni_queue_type {
DPNI_QUEUE_RX,
DPNI_QUEUE_TX,
DPNI_QUEUE_TX_CONFIRM,
DPNI_QUEUE_RX_ERR,
};
/**
* struct dpni_cfg - Structure representing DPNI configuration
* @options: Any combination of the following options:
* DPNI_OPT_TX_FRM_RELEASE
* DPNI_OPT_NO_MAC_FILTER
* DPNI_OPT_HAS_POLICING
* DPNI_OPT_SHARED_CONGESTION
* DPNI_OPT_HAS_KEY_MASKING
* DPNI_OPT_NO_FS
* DPNI_OPT_SINGLE_SENDER
* DPNI_OPT_STASHING_DIS
* @fs_entries: Number of entries in the flow steering table.
* This table is used to select the ingress queue for
* ingress traffic, targeting a GPP core or another.
* In addition it can be used to discard traffic that
* matches the set rule. It is either an exact match table
* or a TCAM table, depending on DPNI_OPT_ HAS_KEY_MASKING
* bit in OPTIONS field. This field is ignored if
* DPNI_OPT_NO_FS bit is set in OPTIONS field. Otherwise,
* value 0 defaults to 64. Maximum supported value is 1024.
* Note that the total number of entries is limited on the
* SoC to as low as 512 entries if TCAM is used.
* @vlan_filter_entries: Number of entries in the VLAN address filtering
* table. This is an exact match table used to filter
* ingress traffic based on VLAN IDs. Value 0 disables VLAN
* filtering. Maximum supported value is 16.
* @mac_filter_entries: Number of entries in the MAC address filtering
* table. This is an exact match table and allows both
* unicast and multicast entries. The primary MAC address
* of the network interface is not part of this table,
* this contains only entries in addition to it. This
* field is ignored if DPNI_OPT_ NO_MAC_FILTER is set in
* OPTIONS field. Otherwise, value 0 defaults to 80.
* Maximum supported value is 80.
* @num_queues: Number of Tx and Rx queues used for traffic
* distribution. This is orthogonal to QoS and is only
* used to distribute traffic to multiple GPP cores.
* This configuration affects the number of Tx queues
* (logical FQs, all associated with a single CEETM queue),
* Rx queues and Tx confirmation queues, if applicable.
* Value 0 defaults to one queue. Maximum supported value
* is 8.
* @num_tcs: Number of traffic classes (TCs), reserved for the DPNI.
* TCs can have different priority levels for the purpose
* of Tx scheduling (see DPNI_SET_TX_PRIORITIES), different
* BPs (DPNI_ SET_POOLS), policers. There are dedicated QM
* queues for traffic classes (including class queues on
* Tx). Value 0 defaults to one TC. Maximum supported value
* is 16. There are maximum 16 TCs for Tx and 8 TCs for Rx.
* When num_tcs>8 Tx will use this value but Rx will have
* only 8 traffic classes.
* @num_rx_tcs: if set to other value than zero represents number
* of TCs used for Rx. Maximum value is 8. If set to zero the
* number of Rx TCs will be initialized with the value provided
* in num_tcs parameter.
* @qos_entries: Number of entries in the QoS classification table. This
* table is used to select the TC for ingress traffic. It
* is either an exact match or a TCAM table, depending on
* DPNI_OPT_ HAS_KEY_MASKING bit in OPTIONS field. This
* field is ignored if the DPNI has a single TC. Otherwise,
* a value of 0 defaults to 64. Maximum supported value
* is 64.
* @num_channels: Number of egress channels used by this dpni object. If
* set to zero the dpni object will use a single CEETM channel.
*/
struct dpni_cfg {
u32 options;
u16 fs_entries;
u8 vlan_filter_entries;
u8 mac_filter_entries;
u8 num_queues;
u8 num_tcs;
u8 num_rx_tcs;
u8 qos_entries;
u8 num_cgs;
u16 num_opr;
u8 dist_key_size;
u8 num_channels;
};
/**
* dpni_prepare_cfg() - function prepare parameters
* @cfg: cfg structure
* @cfg_buf: Zeroed 256 bytes of memory before mapping it to DMA
*
* This function has to be called before dpni_create()
*/
int dpni_prepare_cfg(const struct dpni_cfg *cfg,
u8 *cfg_buf);
int dpni_create(struct fsl_mc_io *mc_io, u16 dprc_token, u32 cmd_flags,
const struct dpni_cfg *cfg, u32 *obj_id);
int dpni_destroy(struct fsl_mc_io *mc_io, u16 dprc_token, u32 cmd_flags,
u32 object_id);
/**
* struct dpni_pools_cfg - Structure representing buffer pools configuration
* @num_dpbp: Number of DPBPs
* @pool_options: Buffer assignment options
* This field is a combination of DPNI_POOL_ASSOC_flags
* @pools: Array of buffer pools parameters; The number of valid entries
* must match 'num_dpbp' value
* @pools.dpbp_id: DPBP object ID
* @pools.priority: Priority mask that indicates TC's used with this buffer.
* I set to 0x00 MC will assume value 0xff.
* @pools.buffer_size: Buffer size
* @pools.backup_pool: Backup pool
*/
#define DPNI_POOL_ASSOC_QPRI 0
#define DPNI_POOL_ASSOC_QDBIN 1
struct dpni_pools_cfg {
u8 num_dpbp;
u8 pool_options;
struct {
int dpbp_id;
u8 priority_mask;
u16 buffer_size;
int backup_pool;
} pools[DPNI_MAX_DPBP];
};
int dpni_set_pools(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
const struct dpni_pools_cfg *cfg);
int dpni_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
int dpni_disable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
int dpni_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
/**
* struct dpni_attr - Structure representing DPNI attributes
* @options: Any combination of the following options:
* DPNI_OPT_TX_FRM_RELEASE
* DPNI_OPT_NO_MAC_FILTER
* DPNI_OPT_HAS_POLICING
* DPNI_OPT_SHARED_CONGESTION
* DPNI_OPT_HAS_KEY_MASKING
* DPNI_OPT_NO_FS
* DPNI_OPT_STASHING_DIS
* @num_queues: Number of Tx and Rx queues used for traffic distribution.
* @num_rx_tcs: Number of RX traffic classes (TCs), reserved for the DPNI.
* @num_tx_tcs: Number of TX traffic classes (TCs), reserved for the DPNI.
* @mac_filter_entries: Number of entries in the MAC address filtering
* table.
* @vlan_filter_entries: Number of entries in the VLAN address filtering
* table.
* @qos_entries: Number of entries in the QoS classification table.
* @fs_entries: Number of entries in the flow steering table.
* @qos_key_size: Size, in bytes, of the QoS look-up key. Defining a key larger
* than this when adding QoS entries will result
* in an error.
* @fs_key_size: Size, in bytes, of the flow steering look-up key. Defining a
* key larger than this when composing the hash + FS key
* will result in an error.
* @wriop_version: Version of WRIOP HW block.
* The 3 version values are stored on 6, 5, 5 bits
* respectively.
* Values returned:
* - 0x400 - WRIOP version 1.0.0, used on LS2080 and
* variants,
* - 0x421 - WRIOP version 1.1.1, used on LS2088 and
* variants,
* - 0x422 - WRIOP version 1.1.2, used on LS1088 and
* variants.
* - 0xC00 - WRIOP version 3.0.0, used on LX2160 and
* variants.
*/
struct dpni_attr {
u32 options;
u8 num_queues;
u8 num_rx_tcs;
u8 num_tx_tcs;
u8 mac_filter_entries;
u8 vlan_filter_entries;
u8 qos_entries;
u16 fs_entries;
u16 num_opr;
u8 qos_key_size;
u8 fs_key_size;
u16 wriop_version;
u8 num_cgs;
u8 num_channels;
};
int dpni_get_attributes(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
struct dpni_attr *attr);
/* DPNI buffer layout modification options */
/* Select to modify the time-stamp setting */
#define DPNI_BUF_LAYOUT_OPT_TIMESTAMP 0x00000001
/* Select to modify the parser-result setting; not applicable for Tx */
#define DPNI_BUF_LAYOUT_OPT_PARSER_RESULT 0x00000002
/* Select to modify the frame-status setting */
#define DPNI_BUF_LAYOUT_OPT_FRAME_STATUS 0x00000004
/* Select to modify the private-data-size setting */
#define DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE 0x00000008
/* Select to modify the data-alignment setting */
#define DPNI_BUF_LAYOUT_OPT_DATA_ALIGN 0x00000010
/* Select to modify the data-head-room setting */
#define DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM 0x00000020
/*!< Select to modify the data-tail-room setting */
#define DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM 0x00000040
/* Select to modify the sw-opaque value setting */
#define DPNI_BUF_LAYOUT_OPT_SW_OPAQUE 0x00000080
/* Select to disable Scatter Gather and use single buffer */
#define DPNI_BUF_LAYOUT_OPT_NO_SG 0x00000100
/**
* struct dpni_buffer_layout - Structure representing DPNI buffer layout
* @options: Flags representing the suggested modifications to the
* buffer layout;
* Use any combination of 'DPNI_BUF_LAYOUT_OPT_<X>' flags
* @pass_timestamp: Pass timestamp value
* @pass_parser_result: Pass parser results
* @pass_frame_status: Pass frame status
* @private_data_size: Size kept for private data (in bytes)
* @data_align: Data alignment
* @data_head_room: Data head room
* @data_tail_room: Data tail room
*/
struct dpni_buffer_layout {
u32 options;
int pass_timestamp;
int pass_parser_result;
int pass_frame_status;
int pass_sw_opaque;
u16 private_data_size;
u16 data_align;
u16 data_head_room;
u16 data_tail_room;
};
int dpni_set_buffer_layout(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
enum dpni_queue_type qtype,
const struct dpni_buffer_layout *layout);
int dpni_get_qdid(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
enum dpni_queue_type qtype, u16 *qdid);
int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
u16 *data_offset);
/* Enable auto-negotiation */
#define DPNI_LINK_OPT_AUTONEG 0x0000000000000001ULL
/* Enable half-duplex mode */
#define DPNI_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL
/* Enable pause frames */
#define DPNI_LINK_OPT_PAUSE 0x0000000000000004ULL
/* Enable a-symmetric pause frames */
#define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL
/**
* struct - Structure representing DPNI link configuration
* @rate: Rate
* @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values
* @advertising: Speeds that are advertised for autoneg (bitmap)
*/
struct dpni_link_cfg {
u32 rate;
u64 options;
u64 advertising;
};
int dpni_set_link_cfg(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
const struct dpni_link_cfg *cfg);
/**
* struct dpni_link_state - Structure representing DPNI link state
* @rate: Rate
* @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values
* @up: Link state; '0' for down, '1' for up
* @state_valid: Ignore/Update the state of the link
* @supported: Speeds capability of the phy (bitmap)
* @advertising: Speeds that are advertised for autoneg (bitmap)
*/
struct dpni_link_state {
u32 rate;
u64 options;
int up;
int state_valid;
u64 supported;
u64 advertising;
};
int dpni_get_link_state(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
struct dpni_link_state *state);
int dpni_add_mac_addr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
const u8 mac_addr[6], u8 flags,
u8 tc_id, u8 flow_id);
int dpni_get_api_version(struct fsl_mc_io *mc_io, u32 cmd_flags,
u16 *major_ver, u16 *minor_ver);
/**
* enum dpni_dest - DPNI destination types
* @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and
* does not generate FQDAN notifications; user is expected to
* dequeue from the queue based on polling or other user-defined
* method
* @DPNI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN
* notifications to the specified DPIO; user is expected to dequeue
* from the queue only after notification is received
* @DPNI_DEST_DPCON: The queue is set in schedule mode and does not generate
* FQDAN notifications, but is connected to the specified DPCON
* object; user is expected to dequeue from the DPCON channel
*/
enum dpni_dest {
DPNI_DEST_NONE = 0,
DPNI_DEST_DPIO = 1,
DPNI_DEST_DPCON = 2
};
/* DPNI Tx flow modification options */
/* Select to modify the settings for dedicate Tx confirmation/error */
#define DPNI_TX_FLOW_OPT_TX_CONF_ERROR 0x00000001
/*!< Select to modify the L3 checksum generation setting */
#define DPNI_TX_FLOW_OPT_L3_CHKSUM_GEN 0x00000010
/*!< Select to modify the L4 checksum generation setting */
#define DPNI_TX_FLOW_OPT_L4_CHKSUM_GEN 0x00000020
/**
* enum dpni_confirmation_mode - Defines DPNI options supported for Tx
* confirmation
* @DPNI_CONF_AFFINE: For each Tx queue set associated with a sender there is
* an affine Tx Confirmation queue
* @DPNI_CONF_SINGLE: All Tx queues are associated with a single Tx
* confirmation queue
* @DPNI_CONF_DISABLE: Tx frames are not confirmed. This must be associated
* with proper FD set-up to have buffers release to a Buffer Pool, otherwise
* buffers will be leaked
*/
enum dpni_confirmation_mode {
DPNI_CONF_AFFINE,
DPNI_CONF_SINGLE,
DPNI_CONF_DISABLE,
};
/**
* stashes the whole annotation area (up to 192 bytes)
*/
#define DPNI_FLC_STASH_FRAME_ANNOTATION 0x00000001
/**
* struct dpni_queue - Queue structure
* @destination - Destination structure
* @destination.id: ID of the destination, only relevant if DEST_TYPE is > 0.
* Identifies either a DPIO or a DPCON object.
* Not relevant for Tx queues.
* @destination.type: May be one of the following:
* 0 - No destination, queue can be manually
* queried, but will not push traffic or
* notifications to a DPIO;
* 1 - The destination is a DPIO. When traffic
* becomes available in the queue a FQDAN
* (FQ data available notification) will be
* generated to selected DPIO;
* 2 - The destination is a DPCON. The queue is
* associated with a DPCON object for the
* purpose of scheduling between multiple
* queues. The DPCON may be independently
* configured to generate notifications.
* Not relevant for Tx queues.
* @destination.hold_active: Hold active, maintains a queue scheduled for longer
* in a DPIO during dequeue to reduce spread of traffic.
* Only relevant if queues are
* not affined to a single DPIO.
* @user_context: User data, presented to the user along with any frames
* from this queue. Not relevant for Tx queues.
* @flc: FD FLow Context structure
* @flc.value: Default FLC value for traffic dequeued from
* this queue. Please check description of FD
* structure for more information.
* Note that FLC values set using dpni_add_fs_entry,
* if any, take precedence over values per queue.
* @flc.stash_control: Boolean, indicates whether the 6 lowest
* - significant bits are used for stash control.
* significant bits are used for stash control. If set, the 6
* least significant bits in value are interpreted as follows:
* - bits 0-1: indicates the number of 64 byte units of context
* that are stashed. FLC value is interpreted as a memory address
* in this case, excluding the 6 LS bits.
* - bits 2-3: indicates the number of 64 byte units of frame
* annotation to be stashed. Annotation is placed at FD[ADDR].
* - bits 4-5: indicates the number of 64 byte units of frame
* data to be stashed. Frame data is placed at FD[ADDR] +
* FD[OFFSET].
* For more details check the Frame Descriptor section in the
* hardware documentation.
*@cgid :indicate the cgid to set relative to dpni
*/
struct dpni_queue {
struct {
u16 id;
enum dpni_dest type;
char hold_active;
u8 priority;
} destination;
u64 user_context;
struct {
u64 value;
char stash_control;
} flc;
int cgid;
};
/**
* struct dpni_queue_id - Queue identification, used for enqueue commands
* or queue control
* @fqid: FQID used for enqueueing to and/or configuration of this
* specific FQ
* @qdbin: Queueing bin, used to enqueue using QDID, DQBIN, QPRI.
* Only relevant for Tx queues.
*/
struct dpni_queue_id {
u32 fqid;
u16 qdbin;
};
int dpni_set_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
enum dpni_queue_type qtype, u16 param, u8 index,
u8 options, const struct dpni_queue *queue);
int dpni_get_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
enum dpni_queue_type qtype, u16 param, u8 index,
struct dpni_queue *queue, struct dpni_queue_id *qid);
int dpni_set_tx_confirmation_mode(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
u8 ceetm_ch_idx, enum dpni_confirmation_mode mode);
#define DPNI_STATISTICS_CNT 7
/**
* union dpni_statistics - Union describing the DPNI statistics
* @page_0: Page_0 statistics structure
* @page_0.ingress_all_frames: Ingress frame count
* @page_0.ingress_all_bytes: Ingress byte count
* @page_0.ingress_multicast_frames: Ingress multicast frame count
* @page_0.ingress_multicast_bytes: Ingress multicast byte count
* @page_0.ingress_broadcast_frames: Ingress broadcast frame count
* @page_0.ingress_broadcast_bytes: Ingress broadcast byte count
* @page_1: Page_1 statistics structure
* @page_1.egress_all_frames: Egress frame count
* @page_1.egress_all_bytes: Egress byte count
* @page_1.egress_multicast_frames: Egress multicast frame count
* @page_1.egress_multicast_bytes: Egress multicast byte count
* @page_1.egress_broadcast_frames: Egress broadcast frame count
* @page_1.egress_broadcast_bytes: Egress broadcast byte count
* @page_2: Page_2 statistics structure
* @page_2.ingress_filtered_frames: Ingress filtered frame count
* @page_2.ingress_discarded_frames: Ingress discarded frame count
* @page_2.ingress_nobuffer_discards: Ingress discarded frame count due to
* lack of buffers
* @page_2.egress_discarded_frames: Egress discarded frame count
* @page_2.egress_confirmed_frames: Egress confirmed frame count
* @page_3: Page_3 statistics structure
* @page_3.egress_dequeue_bytes: Cumulative count of the number of bytes
* dequeued from egress FQs
* @page_3.egress_dequeue_frames: Cumulative count of the number of frames
* dequeued from egress FQs
* @page_3.egress_reject_bytes: Cumulative count of the number of bytes in
* egress frames whose enqueue was rejected
* @page_3.egress_reject_frames: Cumulative count of the number of egress
* frames whose enqueue was rejected
* @page_4: Page_4 statistics structure: congestion points
* @page_4.cgr_reject_frames: number of rejected frames due to congestion point
* @page_4.cgr_reject_bytes: number of rejected bytes due to congestion point
* @page_5: Page_5 statistics structure: policer
* @page_5.policer_cnt_red: NUmber of red colored frames
* @page_5.policer_cnt_yellow: number of yellow colored frames
* @page_5.policer_cnt_green: number of green colored frames
* @page_5.policer_cnt_re_red: number of recolored red frames
* @page_5.policer_cnt_re_yellow: number of recolored yellow frames
* @page_6: Page_6 statistics structure
* @page_6.tx_pending_frames: total number of frames pending in egress FQs
* @raw: raw statistics structure, used to index counters
*/
union dpni_statistics {
struct {
u64 ingress_all_frames;
u64 ingress_all_bytes;
u64 ingress_multicast_frames;
u64 ingress_multicast_bytes;
u64 ingress_broadcast_frames;
u64 ingress_broadcast_bytes;
} page_0;
struct {
u64 egress_all_frames;
u64 egress_all_bytes;
u64 egress_multicast_frames;
u64 egress_multicast_bytes;
u64 egress_broadcast_frames;
u64 egress_broadcast_bytes;
} page_1;
struct {
u64 ingress_filtered_frames;
u64 ingress_discarded_frames;
u64 ingress_nobuffer_discards;
u64 egress_discarded_frames;
u64 egress_confirmed_frames;
} page_2;
struct {
u64 egress_dequeue_bytes;
u64 egress_dequeue_frames;
u64 egress_reject_bytes;
u64 egress_reject_frames;
} page_3;
struct {
u64 cgr_reject_frames;
u64 cgr_reject_bytes;
} page_4;
struct {
u64 policer_cnt_red;
u64 policer_cnt_yellow;
u64 policer_cnt_green;
u64 policer_cnt_re_red;
u64 policer_cnt_re_yellow;
} page_5;
struct {
u64 tx_pending_frames;
} page_6;
struct {
u64 counter[DPNI_STATISTICS_CNT];
} raw;
};
int dpni_get_statistics(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
u8 page, u16 param, union dpni_statistics *stat);
#endif /* _FSL_DPNI_H */