blob: 85bd37101ba21cc6c69dbf6344f4940ca1dedd71 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Google, Inc
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <log.h>
#include <pch.h>
#include <pci.h>
#include <asm/cpu.h>
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/arch/gpio.h>
#include <dt-bindings/gpio/x86-gpio.h>
#include <dm/pinctrl.h>
#include <dm/uclass-internal.h>
DECLARE_GLOBAL_DATA_PTR;
enum {
MAX_GPIOS = 95,
};
#define PIRQ_SHIFT 16
#define CONF_MASK 0xffff
struct pin_info {
int node;
int phandle;
bool mode_gpio;
bool dir_input;
bool invert;
bool trigger_level;
bool output_high;
bool sense_disable;
bool owner_gpio;
bool route_smi;
bool irq_enable;
bool reset_rsmrst;
bool pirq_apic_route;
};
static int broadwell_pinctrl_read_configs(struct udevice *dev,
struct pin_info *conf, int max_pins)
{
const void *blob = gd->fdt_blob;
int count = 0;
int node;
debug("%s: starting\n", __func__);
for (node = fdt_first_subnode(blob, dev_of_offset(dev));
node > 0;
node = fdt_next_subnode(blob, node)) {
int phandle = fdt_get_phandle(blob, node);
if (!phandle)
continue;
if (count == max_pins)
return -ENOSPC;
/* We've found a new configuration */
memset(conf, '\0', sizeof(*conf));
conf->node = node;
conf->phandle = phandle;
conf->mode_gpio = fdtdec_get_bool(blob, node, "mode-gpio");
if (fdtdec_get_int(blob, node, "direction", -1) == PIN_INPUT)
conf->dir_input = true;
conf->invert = fdtdec_get_bool(blob, node, "invert");
if (fdtdec_get_int(blob, node, "trigger", -1) == TRIGGER_LEVEL)
conf->trigger_level = true;
if (fdtdec_get_int(blob, node, "output-value", -1) == 1)
conf->output_high = true;
conf->sense_disable = fdtdec_get_bool(blob, node,
"sense-disable");
if (fdtdec_get_int(blob, node, "owner", -1) == OWNER_GPIO)
conf->owner_gpio = true;
if (fdtdec_get_int(blob, node, "route", -1) == ROUTE_SMI)
conf->route_smi = true;
conf->irq_enable = fdtdec_get_bool(blob, node, "irq-enable");
conf->reset_rsmrst = fdtdec_get_bool(blob, node,
"reset-rsmrst");
if (fdtdec_get_int(blob, node, "pirq-apic", -1) ==
PIRQ_APIC_ROUTE)
conf->pirq_apic_route = true;
debug("config: phandle=%d\n", phandle);
count++;
conf++;
}
debug("%s: Found %d configurations\n", __func__, count);
return count;
}
static int broadwell_pinctrl_lookup_phandle(struct pin_info *conf,
int conf_count, int phandle)
{
int i;
for (i = 0; i < conf_count; i++) {
if (conf[i].phandle == phandle)
return i;
}
return -ENOENT;
}
static int broadwell_pinctrl_read_pins(struct udevice *dev,
struct pin_info *conf, int conf_count, int gpio_conf[],
int num_gpios)
{
const void *blob = gd->fdt_blob;
int count = 0;
int node;
for (node = fdt_first_subnode(blob, dev_of_offset(dev));
node > 0;
node = fdt_next_subnode(blob, node)) {
int len, i;
const u32 *prop = fdt_getprop(blob, node, "config", &len);
if (!prop)
continue;
/* There are three cells per pin */
count = len / (sizeof(u32) * 3);
debug("Found %d GPIOs to configure\n", count);
for (i = 0; i < count; i++) {
uint gpio = fdt32_to_cpu(prop[i * 3]);
uint phandle = fdt32_to_cpu(prop[i * 3 + 1]);
int val;
if (gpio >= num_gpios) {
debug("%s: GPIO %d out of range\n", __func__,
gpio);
return -EDOM;
}
val = broadwell_pinctrl_lookup_phandle(conf, conf_count,
phandle);
if (val < 0) {
debug("%s: Cannot find phandle %d\n", __func__,
phandle);
return -EINVAL;
}
gpio_conf[gpio] = val |
fdt32_to_cpu(prop[i * 3 + 2]) << PIRQ_SHIFT;
}
}
return 0;
}
static void broadwell_pinctrl_commit(struct pch_lp_gpio_regs *regs,
struct pin_info *pin_info,
int gpio_conf[], int count)
{
u32 owner_gpio[GPIO_BANKS] = {0};
u32 route_smi[GPIO_BANKS] = {0};
u32 irq_enable[GPIO_BANKS] = {0};
u32 reset_rsmrst[GPIO_BANKS] = {0};
u32 pirq2apic = 0;
int set, bit, gpio = 0;
for (gpio = 0; gpio < MAX_GPIOS; gpio++) {
int confnum = gpio_conf[gpio] & CONF_MASK;
struct pin_info *pin = &pin_info[confnum];
u32 val;
val = pin->mode_gpio << CONFA_MODE_SHIFT |
pin->dir_input << CONFA_DIR_SHIFT |
pin->invert << CONFA_INVERT_SHIFT |
pin->trigger_level << CONFA_TRIGGER_SHIFT |
pin->output_high << CONFA_OUTPUT_SHIFT;
outl(val, &regs->config[gpio].conf_a);
outl(pin->sense_disable << CONFB_SENSE_SHIFT,
&regs->config[gpio].conf_b);
/* Determine set and bit based on GPIO number */
set = gpio / GPIO_PER_BANK;
bit = gpio % GPIO_PER_BANK;
/* Apply settings to set specific bits */
owner_gpio[set] |= pin->owner_gpio << bit;
route_smi[set] |= pin->route_smi << bit;
irq_enable[set] |= pin->irq_enable << bit;
reset_rsmrst[set] |= pin->reset_rsmrst << bit;
/* PIRQ to IO-APIC map */
if (pin->pirq_apic_route)
pirq2apic |= gpio_conf[gpio] >> PIRQ_SHIFT;
debug("gpio %d: conf %d, mode_gpio %d, dir_input %d, output_high %d\n",
gpio, confnum, pin->mode_gpio, pin->dir_input,
pin->output_high);
}
for (set = 0; set < GPIO_BANKS; set++) {
outl(owner_gpio[set], &regs->own[set]);
outl(route_smi[set], &regs->gpi_route[set]);
outl(irq_enable[set], &regs->gpi_ie[set]);
outl(reset_rsmrst[set], &regs->rst_sel[set]);
}
outl(pirq2apic, &regs->pirq_to_ioxapic);
}
static int broadwell_pinctrl_probe(struct udevice *dev)
{
struct pch_lp_gpio_regs *regs;
struct pin_info conf[12];
int gpio_conf[MAX_GPIOS];
struct udevice *pch;
int conf_count;
u32 gpiobase;
int ret;
ret = uclass_find_first_device(UCLASS_PCH, &pch);
if (ret)
return ret;
if (!pch)
return -ENODEV;
debug("%s: start\n", __func__);
/* Only init once, before relocation */
if (gd->flags & GD_FLG_RELOC)
return 0;
/*
* Get the memory/io base address to configure every pins.
* IOBASE is used to configure the mode/pads
* GPIOBASE is used to configure the direction and default value
*/
ret = pch_get_gpio_base(pch, &gpiobase);
if (ret) {
debug("%s: invalid GPIOBASE address (%08x)\n", __func__,
gpiobase);
return -EINVAL;
}
conf_count = broadwell_pinctrl_read_configs(dev, conf,
ARRAY_SIZE(conf));
if (conf_count < 0) {
debug("%s: Cannot read configs: err=%d\n", __func__, ret);
return conf_count;
}
/*
* Assume that pin settings are provided for every pin. Pins not
* mentioned will get the first config mentioned in the list.
*/
ret = broadwell_pinctrl_read_pins(dev, conf, conf_count, gpio_conf,
MAX_GPIOS);
if (ret) {
debug("%s: Cannot read pin settings: err=%d\n", __func__, ret);
return ret;
}
regs = (struct pch_lp_gpio_regs *)gpiobase;
broadwell_pinctrl_commit(regs, conf, gpio_conf, ARRAY_SIZE(conf));
debug("%s: done\n", __func__);
return 0;
}
static const struct udevice_id broadwell_pinctrl_match[] = {
{ .compatible = "intel,x86-broadwell-pinctrl",
.data = X86_SYSCON_PINCONF },
{ /* sentinel */ }
};
U_BOOT_DRIVER(broadwell_pinctrl) = {
.name = "broadwell_pinctrl",
.id = UCLASS_SYSCON,
.of_match = broadwell_pinctrl_match,
.probe = broadwell_pinctrl_probe,
};