| /* |
| * (C) Copyright 2001 |
| * Denis Peter, MPL AG Switzerland |
| * |
| * Part of this source has been derived from the Linux USB |
| * project. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| */ |
| #include <common.h> |
| #include <stdio_dev.h> |
| #include <asm/byteorder.h> |
| |
| #include <usb.h> |
| |
| #undef USB_KBD_DEBUG |
| /* |
| * if overwrite_console returns 1, the stdin, stderr and stdout |
| * are switched to the serial port, else the settings in the |
| * environment are used |
| */ |
| #ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE |
| extern int overwrite_console (void); |
| #else |
| int overwrite_console (void) |
| { |
| return (0); |
| } |
| #endif |
| |
| #ifdef USB_KBD_DEBUG |
| #define USB_KBD_PRINTF(fmt,args...) printf (fmt ,##args) |
| #else |
| #define USB_KBD_PRINTF(fmt,args...) |
| #endif |
| |
| |
| #define REPEAT_RATE 40/4 /* 40msec -> 25cps */ |
| #define REPEAT_DELAY 10 /* 10 x REAPEAT_RATE = 400msec */ |
| |
| #define NUM_LOCK 0x53 |
| #define CAPS_LOCK 0x39 |
| #define SCROLL_LOCK 0x47 |
| |
| |
| /* Modifier bits */ |
| #define LEFT_CNTR 0 |
| #define LEFT_SHIFT 1 |
| #define LEFT_ALT 2 |
| #define LEFT_GUI 3 |
| #define RIGHT_CNTR 4 |
| #define RIGHT_SHIFT 5 |
| #define RIGHT_ALT 6 |
| #define RIGHT_GUI 7 |
| |
| #define USB_KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */ |
| |
| static volatile char usb_kbd_buffer[USB_KBD_BUFFER_LEN]; |
| static volatile int usb_in_pointer = 0; |
| static volatile int usb_out_pointer = 0; |
| |
| unsigned char new[8]; |
| unsigned char old[8]; |
| int repeat_delay; |
| #define DEVNAME "usbkbd" |
| static unsigned char num_lock = 0; |
| static unsigned char caps_lock = 0; |
| static unsigned char scroll_lock = 0; |
| static unsigned char ctrl = 0; |
| |
| static unsigned char leds __attribute__ ((aligned (0x4))); |
| |
| static unsigned char usb_kbd_numkey[] = { |
| '1', '2', '3', '4', '5', '6', '7', '8', '9', '0','\r',0x1b,'\b','\t',' ', '-', |
| '=', '[', ']','\\', '#', ';', '\'', '`', ',', '.', '/' |
| }; |
| static unsigned char usb_kbd_numkey_shifted[] = { |
| '!', '@', '#', '$', '%', '^', '&', '*', '(', ')','\r',0x1b,'\b','\t',' ', '_', |
| '+', '{', '}', '|', '~', ':', '"', '~', '<', '>', '?' |
| }; |
| //" |
| /****************************************************************** |
| * Queue handling |
| ******************************************************************/ |
| /* puts character in the queue and sets up the in and out pointer */ |
| static void usb_kbd_put_queue(char data) |
| { |
| if((usb_in_pointer+1)==USB_KBD_BUFFER_LEN) { |
| if(usb_out_pointer==0) { |
| return; /* buffer full */ |
| } else{ |
| usb_in_pointer=0; |
| } |
| } else { |
| if((usb_in_pointer+1)==usb_out_pointer) |
| return; /* buffer full */ |
| usb_in_pointer++; |
| } |
| usb_kbd_buffer[usb_in_pointer]=data; |
| return; |
| } |
| |
| /* test if a character is in the queue */ |
| static int usb_kbd_testc(void) |
| { |
| #ifdef CONFIG_SYS_USB_EVENT_POLL |
| usb_event_poll(); |
| #endif |
| if(usb_in_pointer==usb_out_pointer) |
| return(0); /* no data */ |
| else |
| return(1); |
| } |
| /* gets the character from the queue */ |
| static int usb_kbd_getc(void) |
| { |
| char c; |
| while(usb_in_pointer==usb_out_pointer) { |
| #ifdef CONFIG_SYS_USB_EVENT_POLL |
| usb_event_poll(); |
| #endif |
| } |
| if((usb_out_pointer+1)==USB_KBD_BUFFER_LEN) |
| usb_out_pointer=0; |
| else |
| usb_out_pointer++; |
| c=usb_kbd_buffer[usb_out_pointer]; |
| return (int)c; |
| |
| } |
| |
| /* forward decleration */ |
| static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum); |
| |
| /* search for keyboard and register it if found */ |
| int drv_usb_kbd_init(void) |
| { |
| int error,i; |
| struct stdio_dev usb_kbd_dev,*old_dev; |
| struct usb_device *dev; |
| char *stdinname = getenv ("stdin"); |
| |
| usb_in_pointer=0; |
| usb_out_pointer=0; |
| /* scan all USB Devices */ |
| for(i=0;i<USB_MAX_DEVICE;i++) { |
| dev=usb_get_dev_index(i); /* get device */ |
| if(dev == NULL) |
| return -1; |
| if(dev->devnum!=-1) { |
| if(usb_kbd_probe(dev,0)==1) { /* Ok, we found a keyboard */ |
| /* check, if it is already registered */ |
| USB_KBD_PRINTF("USB KBD found set up device.\n"); |
| old_dev = stdio_get_by_name(DEVNAME); |
| if(old_dev) { |
| /* ok, already registered, just return ok */ |
| USB_KBD_PRINTF("USB KBD is already registered.\n"); |
| return 1; |
| } |
| /* register the keyboard */ |
| USB_KBD_PRINTF("USB KBD register.\n"); |
| memset (&usb_kbd_dev, 0, sizeof(struct stdio_dev)); |
| strcpy(usb_kbd_dev.name, DEVNAME); |
| usb_kbd_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM; |
| usb_kbd_dev.putc = NULL; |
| usb_kbd_dev.puts = NULL; |
| usb_kbd_dev.getc = usb_kbd_getc; |
| usb_kbd_dev.tstc = usb_kbd_testc; |
| usb_kbd_dev.priv = (void *)dev; |
| error = stdio_register (&usb_kbd_dev); |
| if(error==0) { |
| /* check if this is the standard input device */ |
| if(strcmp(stdinname,DEVNAME)==0) { |
| /* reassign the console */ |
| if(overwrite_console()) { |
| return 1; |
| } |
| error=console_assign(stdin,DEVNAME); |
| if(error==0) |
| return 1; |
| else |
| return error; |
| } |
| return 1; |
| } |
| return error; |
| } |
| } |
| } |
| /* no USB Keyboard found */ |
| return -1; |
| } |
| |
| |
| /* deregistering the keyboard */ |
| int usb_kbd_deregister(void) |
| { |
| #ifdef CONFIG_SYS_STDIO_DEREGISTER |
| return stdio_deregister(DEVNAME); |
| #else |
| return 1; |
| #endif |
| } |
| |
| /************************************************************************** |
| * Low Level drivers |
| */ |
| |
| /* set the LEDs. Since this is used in the irq routine, the control job |
| is issued with a timeout of 0. This means, that the job is queued without |
| waiting for job completion */ |
| |
| static void usb_kbd_setled(struct usb_device *dev) |
| { |
| struct usb_interface *iface; |
| iface = &dev->config.if_desc[0]; |
| leds=0; |
| if(scroll_lock!=0) |
| leds|=1; |
| leds<<=1; |
| if(caps_lock!=0) |
| leds|=1; |
| leds<<=1; |
| if(num_lock!=0) |
| leds|=1; |
| usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
| USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0x200, iface->desc.bInterfaceNumber, (void *)&leds, 1, 0); |
| |
| } |
| |
| |
| #define CAPITAL_MASK 0x20 |
| /* Translate the scancode in ASCII */ |
| static int usb_kbd_translate(unsigned char scancode,unsigned char modifier,int pressed) |
| { |
| unsigned char keycode; |
| |
| if(pressed==0) { |
| /* key released */ |
| repeat_delay=0; |
| return 0; |
| } |
| if(pressed==2) { |
| repeat_delay++; |
| if(repeat_delay<REPEAT_DELAY) |
| return 0; |
| repeat_delay=REPEAT_DELAY; |
| } |
| keycode=0; |
| if((scancode>3) && (scancode<=0x1d)) { /* alpha numeric values */ |
| keycode=scancode-4 + 0x61; |
| if(caps_lock) |
| keycode&=~CAPITAL_MASK; /* switch to capital Letters */ |
| if(((modifier&(1<<LEFT_SHIFT))!=0)||((modifier&(1<<RIGHT_SHIFT))!=0)) { |
| if(keycode & CAPITAL_MASK) |
| keycode&=~CAPITAL_MASK; /* switch to capital Letters */ |
| else |
| keycode|=CAPITAL_MASK; /* switch to non capital Letters */ |
| } |
| } |
| if((scancode>0x1d) && (scancode<0x3A)) { |
| if(((modifier&(1<<LEFT_SHIFT))!=0)||((modifier&(1<<RIGHT_SHIFT))!=0)) /* shifted */ |
| keycode=usb_kbd_numkey_shifted[scancode-0x1e]; |
| else /* non shifted */ |
| keycode=usb_kbd_numkey[scancode-0x1e]; |
| } |
| |
| if (ctrl) |
| keycode = scancode - 0x3; |
| |
| if(pressed==1) { |
| #if defined(CONFIG_SAM4XX) |
| /* Menu system keycodes */ |
| extern int console_changed; |
| |
| switch(scancode) |
| { |
| case 41: usb_kbd_put_queue(5); return 0; // ESC |
| case 40: usb_kbd_put_queue(13); return 0; // ENTER |
| case 88: usb_kbd_put_queue(13); return 0; // NUMPAD ENTER |
| |
| case 79: usb_kbd_put_queue(1); return 0; // CURSOR RIGHT |
| case 80: usb_kbd_put_queue(2); return 0; // CURSOR LEFT |
| case 81: usb_kbd_put_queue(3); return 0; // CURSOR DOWN |
| case 82: usb_kbd_put_queue(4); return 0; // CURSOR UP |
| |
| case 75: usb_kbd_put_queue(4); return 0; // PG UP |
| case 78: usb_kbd_put_queue(3); return 0; // PG DOWN |
| |
| case 69: // SHIFT + F12 |
| if (modifier == 1) |
| { |
| setenv ("stdin", "usbkbd"); |
| setenv ("stdout", "vga"); |
| console_changed = 1; |
| } |
| return 0; |
| } |
| #endif |
| if(scancode==NUM_LOCK) { |
| num_lock=~num_lock; |
| return 1; |
| } |
| if(scancode==CAPS_LOCK) { |
| caps_lock=~caps_lock; |
| return 1; |
| } |
| if(scancode==SCROLL_LOCK) { |
| scroll_lock=~scroll_lock; |
| return 1; |
| } |
| } |
| if(keycode!=0) { |
| USB_KBD_PRINTF("%c",keycode); |
| usb_kbd_put_queue(keycode); |
| } |
| return 0; |
| } |
| |
| /* Interrupt service routine */ |
| static int usb_kbd_irq(struct usb_device *dev) |
| { |
| int i,res; |
| |
| if((dev->irq_status!=0)||(dev->irq_act_len!=8)) |
| { |
| USB_KBD_PRINTF("usb_keyboard Error %lX, len %d\n",dev->irq_status,dev->irq_act_len); |
| return 1; |
| } |
| res=0; |
| |
| switch (new[0]) { |
| case 0x0: /* No combo key pressed */ |
| ctrl = 0; |
| break; |
| case 0x01: /* Left Ctrl pressed */ |
| case 0x10: /* Right Ctrl pressed */ |
| ctrl = 1; |
| break; |
| } |
| |
| for (i = 2; i < 8; i++) { |
| if (old[i] > 3 && memscan(&new[2], old[i], 6) == &new[8]) { |
| res|=usb_kbd_translate(old[i],new[0],0); |
| } |
| if (new[i] > 3 && memscan(&old[2], new[i], 6) == &old[8]) { |
| res|=usb_kbd_translate(new[i],new[0],1); |
| } |
| } |
| if((new[2]>3) && (old[2]==new[2])) /* still pressed */ |
| res|=usb_kbd_translate(new[2],new[0],2); |
| if(res==1) |
| usb_kbd_setled(dev); |
| memcpy(&old[0],&new[0], 8); |
| return 1; /* install IRQ Handler again */ |
| } |
| |
| /* probes the USB device dev for keyboard type */ |
| static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum) |
| { |
| struct usb_interface *iface; |
| struct usb_endpoint_descriptor *ep; |
| int pipe,maxp; |
| |
| if (dev->descriptor.bNumConfigurations != 1) return 0; |
| iface = &dev->config.if_desc[ifnum]; |
| |
| if (iface->desc.bInterfaceClass != 3) |
| return 0; |
| if (iface->desc.bInterfaceSubClass != 1) |
| return 0; |
| if (iface->desc.bInterfaceProtocol != 1) |
| return 0; |
| if (iface->desc.bNumEndpoints != 1) |
| return 0; |
| |
| ep = &iface->ep_desc[0]; |
| |
| if (!(ep->bEndpointAddress & 0x80)) return 0; |
| if ((ep->bmAttributes & 3) != 3) return 0; |
| USB_KBD_PRINTF("USB KBD found set protocol...\n"); |
| /* ok, we found a USB Keyboard, install it */ |
| /* usb_kbd_get_hid_desc(dev); */ |
| usb_set_protocol(dev, iface->desc.bInterfaceNumber, 0); |
| USB_KBD_PRINTF("USB KBD found set idle...\n"); |
| usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE, 0); |
| memset(&new[0], 0, 8); |
| memset(&old[0], 0, 8); |
| repeat_delay=0; |
| pipe = usb_rcvintpipe(dev, ep->bEndpointAddress); |
| maxp = usb_maxpacket(dev, pipe); |
| dev->irq_handle=usb_kbd_irq; |
| USB_KBD_PRINTF("USB KBD enable interrupt pipe...\n"); |
| usb_submit_int_msg(dev,pipe,&new[0], maxp > 8 ? 8 : maxp,ep->bInterval); |
| return 1; |
| } |
| |
| |
| #if 0 |
| struct usb_hid_descriptor { |
| unsigned char bLength; |
| unsigned char bDescriptorType; /* 0x21 for HID */ |
| unsigned short bcdHID; /* release number */ |
| unsigned char bCountryCode; |
| unsigned char bNumDescriptors; |
| unsigned char bReportDescriptorType; |
| unsigned short wDescriptorLength; |
| } __attribute__ ((packed)); |
| |
| /* |
| * We parse each description item into this structure. Short items data |
| * values are expanded to 32-bit signed int, long items contain a pointer |
| * into the data area. |
| */ |
| |
| struct hid_item { |
| unsigned char format; |
| unsigned char size; |
| unsigned char type; |
| unsigned char tag; |
| union { |
| unsigned char u8; |
| char s8; |
| unsigned short u16; |
| short s16; |
| unsigned long u32; |
| long s32; |
| unsigned char *longdata; |
| } data; |
| }; |
| |
| /* |
| * HID report item format |
| */ |
| |
| #define HID_ITEM_FORMAT_SHORT 0 |
| #define HID_ITEM_FORMAT_LONG 1 |
| |
| /* |
| * Special tag indicating long items |
| */ |
| |
| #define HID_ITEM_TAG_LONG 15 |
| |
| |
| static struct usb_hid_descriptor usb_kbd_hid_desc; |
| |
| void usb_kbd_display_hid(struct usb_hid_descriptor *hid) |
| { |
| printf("USB_HID_DESC:\n"); |
| printf(" bLenght 0x%x\n",hid->bLength); |
| printf(" bcdHID 0x%x\n",hid->bcdHID); |
| printf(" bCountryCode %d\n",hid->bCountryCode); |
| printf(" bNumDescriptors 0x%x\n",hid->bNumDescriptors); |
| printf(" bReportDescriptorType 0x%x\n",hid->bReportDescriptorType); |
| printf(" wDescriptorLength 0x%x\n",hid->wDescriptorLength); |
| } |
| |
| |
| /* |
| * Fetch a report description item from the data stream. We support long |
| * items, though they are not used yet. |
| */ |
| |
| static int fetch_item(unsigned char *start,unsigned char *end, struct hid_item *item) |
| { |
| if((end - start) > 0) { |
| unsigned char b = *start++; |
| item->type = (b >> 2) & 3; |
| item->tag = (b >> 4) & 15; |
| if (item->tag == HID_ITEM_TAG_LONG) { |
| item->format = HID_ITEM_FORMAT_LONG; |
| if ((end - start) >= 2) { |
| item->size = *start++; |
| item->tag = *start++; |
| if ((end - start) >= item->size) { |
| item->data.longdata = start; |
| start += item->size; |
| return item->size; |
| } |
| } |
| } else { |
| item->format = HID_ITEM_FORMAT_SHORT; |
| item->size = b & 3; |
| switch (item->size) { |
| case 0: |
| return item->size; |
| case 1: |
| if ((end - start) >= 1) { |
| item->data.u8 = *start++; |
| return item->size; |
| } |
| break; |
| case 2: |
| if ((end - start) >= 2) { |
| item->data.u16 = le16_to_cpu((unsigned short *)start); |
| start+=2; |
| return item->size; |
| } |
| case 3: |
| item->size++; |
| if ((end - start) >= 4) { |
| item->data.u32 = le32_to_cpu((unsigned long *)start); |
| start+=4; |
| return item->size; |
| } |
| } |
| } |
| } |
| return -1; |
| } |
| |
| /* |
| * HID report descriptor item type (prefix bit 2,3) |
| */ |
| |
| #define HID_ITEM_TYPE_MAIN 0 |
| #define HID_ITEM_TYPE_GLOBAL 1 |
| #define HID_ITEM_TYPE_LOCAL 2 |
| #define HID_ITEM_TYPE_RESERVED 3 |
| /* |
| * HID report descriptor main item tags |
| */ |
| |
| #define HID_MAIN_ITEM_TAG_INPUT 8 |
| #define HID_MAIN_ITEM_TAG_OUTPUT 9 |
| #define HID_MAIN_ITEM_TAG_FEATURE 11 |
| #define HID_MAIN_ITEM_TAG_BEGIN_COLLECTION 10 |
| #define HID_MAIN_ITEM_TAG_END_COLLECTION 12 |
| /* |
| * HID report descriptor main item contents |
| */ |
| |
| #define HID_MAIN_ITEM_CONSTANT 0x001 |
| #define HID_MAIN_ITEM_VARIABLE 0x002 |
| #define HID_MAIN_ITEM_RELATIVE 0x004 |
| #define HID_MAIN_ITEM_WRAP 0x008 |
| #define HID_MAIN_ITEM_NONLINEAR 0x010 |
| #define HID_MAIN_ITEM_NO_PREFERRED 0x020 |
| #define HID_MAIN_ITEM_NULL_STATE 0x040 |
| #define HID_MAIN_ITEM_VOLATILE 0x080 |
| #define HID_MAIN_ITEM_BUFFERED_BYTE 0x100 |
| |
| /* |
| * HID report descriptor collection item types |
| */ |
| |
| #define HID_COLLECTION_PHYSICAL 0 |
| #define HID_COLLECTION_APPLICATION 1 |
| #define HID_COLLECTION_LOGICAL 2 |
| /* |
| * HID report descriptor global item tags |
| */ |
| |
| #define HID_GLOBAL_ITEM_TAG_USAGE_PAGE 0 |
| #define HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM 1 |
| #define HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM 2 |
| #define HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM 3 |
| #define HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM 4 |
| #define HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT 5 |
| #define HID_GLOBAL_ITEM_TAG_UNIT 6 |
| #define HID_GLOBAL_ITEM_TAG_REPORT_SIZE 7 |
| #define HID_GLOBAL_ITEM_TAG_REPORT_ID 8 |
| #define HID_GLOBAL_ITEM_TAG_REPORT_COUNT 9 |
| #define HID_GLOBAL_ITEM_TAG_PUSH 10 |
| #define HID_GLOBAL_ITEM_TAG_POP 11 |
| |
| /* |
| * HID report descriptor local item tags |
| */ |
| |
| #define HID_LOCAL_ITEM_TAG_USAGE 0 |
| #define HID_LOCAL_ITEM_TAG_USAGE_MINIMUM 1 |
| #define HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM 2 |
| #define HID_LOCAL_ITEM_TAG_DESIGNATOR_INDEX 3 |
| #define HID_LOCAL_ITEM_TAG_DESIGNATOR_MINIMUM 4 |
| #define HID_LOCAL_ITEM_TAG_DESIGNATOR_MAXIMUM 5 |
| #define HID_LOCAL_ITEM_TAG_STRING_INDEX 7 |
| #define HID_LOCAL_ITEM_TAG_STRING_MINIMUM 8 |
| #define HID_LOCAL_ITEM_TAG_STRING_MAXIMUM 9 |
| #define HID_LOCAL_ITEM_TAG_DELIMITER 10 |
| |
| |
| static void usb_kbd_show_item(struct hid_item *item) |
| { |
| switch(item->type) { |
| case HID_ITEM_TYPE_MAIN: |
| switch(item->tag) { |
| case HID_MAIN_ITEM_TAG_INPUT: |
| printf("Main Input"); |
| break; |
| case HID_MAIN_ITEM_TAG_OUTPUT: |
| printf("Main Output"); |
| break; |
| case HID_MAIN_ITEM_TAG_FEATURE: |
| printf("Main Feature"); |
| break; |
| case HID_MAIN_ITEM_TAG_BEGIN_COLLECTION: |
| printf("Main Begin Collection"); |
| break; |
| case HID_MAIN_ITEM_TAG_END_COLLECTION: |
| printf("Main End Collection"); |
| break; |
| default: |
| printf("Main reserved %d",item->tag); |
| break; |
| } |
| break; |
| case HID_ITEM_TYPE_GLOBAL: |
| switch(item->tag) { |
| case HID_GLOBAL_ITEM_TAG_USAGE_PAGE: |
| printf("- Global Usage Page"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM: |
| printf("- Global Logical Minimum"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM: |
| printf("- Global Logical Maximum"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM: |
| printf("- Global physical Minimum"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM: |
| printf("- Global physical Maximum"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT: |
| printf("- Global Unit Exponent"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_UNIT: |
| printf("- Global Unit"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_REPORT_SIZE: |
| printf("- Global Report Size"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_REPORT_ID: |
| printf("- Global Report ID"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_REPORT_COUNT: |
| printf("- Global Report Count"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_PUSH: |
| printf("- Global Push"); |
| break; |
| case HID_GLOBAL_ITEM_TAG_POP: |
| printf("- Global Pop"); |
| break; |
| default: |
| printf("- Global reserved %d",item->tag); |
| break; |
| } |
| break; |
| case HID_ITEM_TYPE_LOCAL: |
| switch(item->tag) { |
| case HID_LOCAL_ITEM_TAG_USAGE: |
| printf("-- Local Usage"); |
| break; |
| case HID_LOCAL_ITEM_TAG_USAGE_MINIMUM: |
| printf("-- Local Usage Minimum"); |
| break; |
| case HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM: |
| printf("-- Local Usage Maximum"); |
| break; |
| case HID_LOCAL_ITEM_TAG_DESIGNATOR_INDEX: |
| printf("-- Local Designator Index"); |
| break; |
| case HID_LOCAL_ITEM_TAG_DESIGNATOR_MINIMUM: |
| printf("-- Local Designator Minimum"); |
| break; |
| case HID_LOCAL_ITEM_TAG_DESIGNATOR_MAXIMUM: |
| printf("-- Local Designator Maximum"); |
| break; |
| case HID_LOCAL_ITEM_TAG_STRING_INDEX: |
| printf("-- Local String Index"); |
| break; |
| case HID_LOCAL_ITEM_TAG_STRING_MINIMUM: |
| printf("-- Local String Minimum"); |
| break; |
| case HID_LOCAL_ITEM_TAG_STRING_MAXIMUM: |
| printf("-- Local String Maximum"); |
| break; |
| case HID_LOCAL_ITEM_TAG_DELIMITER: |
| printf("-- Local Delimiter"); |
| break; |
| default: |
| printf("-- Local reserved %d",item->tag); |
| break; |
| } |
| break; |
| default: |
| printf("--- reserved %d",item->type); |
| break; |
| } |
| switch(item->size) { |
| case 1: |
| printf(" %d",item->data.u8); |
| break; |
| case 2: |
| printf(" %d",item->data.u16); |
| break; |
| case 4: |
| printf(" %ld",item->data.u32); |
| break; |
| } |
| printf("\n"); |
| } |
| |
| |
| static int usb_kbd_get_hid_desc(struct usb_device *dev) |
| { |
| unsigned char buffer[256]; |
| struct usb_descriptor_header *head; |
| struct usb_config_descriptor *config; |
| int index,len,i; |
| unsigned char *start, *end; |
| struct hid_item item; |
| |
| if(usb_get_configuration_no(dev,&buffer[0],0)==-1) |
| return -1; |
| head =(struct usb_descriptor_header *)&buffer[0]; |
| if(head->bDescriptorType!=USB_DT_CONFIG) { |
| printf(" ERROR: NOT USB_CONFIG_DESC %x\n",head->bDescriptorType); |
| return -1; |
| } |
| index=head->bLength; |
| config=(struct usb_config_descriptor *)&buffer[0]; |
| len=le16_to_cpu(config->wTotalLength); |
| /* Ok the first entry must be a configuration entry, now process the others */ |
| head=(struct usb_descriptor_header *)&buffer[index]; |
| while(index+1 < len) { |
| if(head->bDescriptorType==USB_DT_HID) { |
| printf("HID desc found\n"); |
| memcpy(&usb_kbd_hid_desc,&buffer[index],buffer[index]); |
| le16_to_cpus(&usb_kbd_hid_desc.bcdHID); |
| le16_to_cpus(&usb_kbd_hid_desc.wDescriptorLength); |
| usb_kbd_display_hid(&usb_kbd_hid_desc); |
| len=0; |
| break; |
| } |
| index+=head->bLength; |
| head=(struct usb_descriptor_header *)&buffer[index]; |
| } |
| if(len>0) |
| return -1; |
| len=usb_kbd_hid_desc.wDescriptorLength; |
| if((index = usb_get_class_descriptor(dev, 0, USB_DT_REPORT, 0, &buffer[0], len)) < 0) { |
| printf("reading report descriptor failed\n"); |
| return -1; |
| } |
| printf(" report descriptor (size %u, read %d)\n", len, index); |
| start = &buffer[0]; |
| end = &buffer[len]; |
| i=0; |
| do { |
| index=fetch_item(start,end,&item); |
| i+=index; |
| i++; |
| if(index>=0) |
| usb_kbd_show_item(&item); |
| |
| start+=index; |
| start++; |
| } while(index>=0); |
| |
| } |
| |
| #endif |