blob: 08546fbb03895a8f1ffd358bb417ea48622482a6 [file] [log] [blame]
/*
* SPI flash internal definitions
*
* Copyright (C) 2008 Atmel Corporation
*/
/* Common parameters -- kind of high, but they should only occur when there
* is a problem (and well your system already is broken), so err on the side
* of caution in case we're dealing with slower SPI buses and/or processors.
*/
#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
/* Common commands */
#define CMD_READ_ID 0x9f
#define CMD_READ_ARRAY_SLOW 0x03
#define CMD_READ_ARRAY_FAST 0x0b
#define CMD_READ_ARRAY_LEGACY 0xe8
/* Send a single-byte command to the device and read the response */
int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
/*
* Send a multi-byte command to the device and read the response. Used
* for flash array reads, etc.
*/
int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
/*
* Send a multi-byte command to the device followed by (optional)
* data. Used for programming the flash array, etc.
*/
int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
const void *data, size_t data_len);
/*
* Same as spi_flash_cmd_read() except it also claims/releases the SPI
* bus. Used as common part of the ->read() operation.
*/
int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
/* Manufacturer-specific probe functions */
struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);