blob: c0a97bc5dad7722fd4fb4e36e8a7d1108f3e7966 [file] [log] [blame]
/*
* Memory Setup stuff - taken from blob memsetup.S
*
* Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
*
* Copyright (C) 2005 HP Labs
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/sizes.h>
#include <asm/arch/hardware.h>
#include <asm/arch/io.h>
#include <asm/arch/at91_pio.h>
int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
{
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
if (use_pullup)
writel(1 << pin, &pio->port[port].puer);
else
writel(1 << pin, &pio->port[port].pudr);
writel(mask, &pio->port[port].per);
}
return 0;
}
/*
* mux the pin to the "GPIO" peripheral role.
*/
int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
{
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
writel(mask, &pio->port[port].idr);
at91_set_pio_pullup(port, pin, use_pullup);
writel(mask, &pio->port[port].per);
}
return 0;
}
/*
* mux the pin to the "A" internal peripheral role.
*/
int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
{
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
writel(mask, &pio->port[port].idr);
at91_set_pio_pullup(port, pin, use_pullup);
writel(mask, &pio->port[port].asr);
writel(mask, &pio->port[port].pdr);
}
return 0;
}
/*
* mux the pin to the "B" internal peripheral role.
*/
int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup)
{
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
writel(mask, &pio->port[port].idr);
at91_set_pio_pullup(port, pin, use_pullup);
writel(mask, &pio->port[port].bsr);
writel(mask, &pio->port[port].pdr);
}
return 0;
}
/*
* mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
* configure it for an input.
*/
int at91_set_pio_input(unsigned port, u32 pin, int use_pullup)
{
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
writel(mask, &pio->port[port].idr);
at91_set_pio_pullup(port, pin, use_pullup);
writel(mask, &pio->port[port].odr);
writel(mask, &pio->port[port].per);
}
return 0;
}
/*
* mux the pin to the gpio controller (instead of "A" or "B" peripheral),
* and configure it for an output.
*/
int at91_set_pio_output(unsigned port, u32 pin, int value)
{
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
writel(mask, &pio->port[port].idr);
writel(mask, &pio->port[port].pudr);
if (value)
writel(mask, &pio->port[port].sodr);
else
writel(mask, &pio->port[port].codr);
writel(mask, &pio->port[port].oer);
writel(mask, &pio->port[port].per);
}
return 0;
}
/*
* enable/disable the glitch filter. mostly used with IRQ handling.
*/
int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on)
{
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
if (is_on)
writel(mask, &pio->port[port].ifer);
else
writel(mask, &pio->port[port].ifdr);
}
return 0;
}
/*
* enable/disable the multi-driver. This is only valid for output and
* allows the output pin to run as an open collector output.
*/
int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on)
{
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
if (is_on)
writel(mask, &pio->port[port].mder);
else
writel(mask, &pio->port[port].mddr);
}
return 0;
}
/*
* assuming the pin is muxed as a gpio output, set its value.
*/
int at91_set_pio_value(unsigned port, unsigned pin, int value)
{
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
if (value)
writel(mask, &pio->port[port].sodr);
else
writel(mask, &pio->port[port].codr);
}
return 0;
}
/*
* read the pin's value (works even if it's not muxed as a gpio).
*/
int at91_get_pio_value(unsigned port, unsigned pin)
{
u32 pdsr = 0;
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
u32 mask;
if ((port < AT91_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
pdsr = readl(&pio->port[port].pdsr) & mask;
}
return pdsr != 0;
}