blob: 69bba3f5eeff81e685dbb4ec0b32e563c266bda9 [file] [log] [blame]
/*
* interrupt.S - trampoline default exceptions/interrupts to C handlers
*
* Copyright (c) 2005-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#include <config.h>
#include <asm/blackfin.h>
#include <asm/entry.h>
#include <asm/ptrace.h>
#include <asm/deferred.h>
#include <asm/mach-common/bits/core.h>
.text
/* default entry point for exceptions */
ENTRY(_trap)
CONFIG_BFIN_SCRATCH_REG = sp;
sp.l = LO(L1_SRAM_SCRATCH_END - 20);
sp.h = HI(L1_SRAM_SCRATCH_END - 20);
SAVE_ALL_SYS
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
r1 = 3; /* EVT3 space */
sp += -12;
call _trap_c;
sp += 12;
#ifdef CONFIG_EXCEPTION_DEFER
CC = R0 == 0;
IF CC JUMP .Lexit_trap;
/* To avoid double faults, lower our priority to IRQ5 */
p4.l = lo(COREMMR_BASE);
p4.h = hi(COREMMR_BASE);
r7.h = _exception_to_level5;
r7.l = _exception_to_level5;
[p4 + (EVT5 - COREMMR_BASE)] = r7;
/*
* Save these registers, as they are only valid in exception context
* (where we are now - as soon as we defer to IRQ5, they can change)
*/
p5.l = _deferred_regs;
p5.h = _deferred_regs;
r6 = [p4 + (DCPLB_FAULT_ADDR - COREMMR_BASE)];
[p5 + (deferred_regs_DCPLB_FAULT_ADDR * 4)] = r6;
r6 = [p4 + (ICPLB_FAULT_ADDR - COREMMR_BASE)];
[p5 + (deferred_regs_ICPLB_FAULT_ADDR * 4)] = r6;
/* Save the state of single stepping */
r6 = SYSCFG;
[p5 + (deferred_regs_SYSCFG * 4)] = r6;
/* Clear it while we handle the exception in IRQ5 mode
* RESTORE_ALL_SYS will load it, so all we need to do is store it
* in the right place
*/
BITCLR(r6, SYSCFG_SSSTEP_P);
[SP + PT_SYSCFG] = r6;
/* Since we are going to clobber RETX, we need to save it */
r6 = retx;
[p5 + (deferred_regs_retx * 4)] = r6;
/* Save the current IMASK, since we change in order to jump to level 5 */
cli r6;
[p5 + (deferred_regs_IMASK * 4)] = r6;
/* Disable all interrupts, but make sure level 5 is enabled so
* we can switch to that level.
*/
r6 = 0x3f;
sti r6;
/* Clobber RETX so we don't end up back at a faulting instruction */
[sp + PT_RETX] = r7;
/* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
* clear it (re-enabling interrupts again) by the special sequence of pushing
* RETI onto the stack. This way we can lower ourselves to IVG5 even if the
* exception was taken after the interrupt handler was called but before it
* got a chance to enable global interrupts itself.
*/
[--sp] = reti;
sp += 4;
RAISE 5;
.Lexit_trap:
#endif
#if ANOMALY_05000257
R7 = LC0;
LC0 = R7;
R7 = LC1;
LC1 = R7;
#endif
RESTORE_ALL_SYS
sp = CONFIG_BFIN_SCRATCH_REG;
rtx;
ENDPROC(_trap)
#ifdef CONFIG_EXCEPTION_DEFER
/* Deferred (IRQ5) exceptions */
ENTRY(_exception_to_level5)
SAVE_ALL_SYS
/* Now we have to fix things up */
p4.l = lo(EVT5);
p4.h = hi(EVT5);
r0.l = _evt_default;
r0.h = _evt_default;
[p4] = r0;
csync;
p4.l = _deferred_regs;
p4.h = _deferred_regs;
r0 = [p4 + (deferred_regs_retx * 4)];
[sp + PT_PC] = r0;
r0 = [p4 + (deferred_regs_SYSCFG * 4)];
[sp + PT_SYSCFG] = r0;
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
r1 = 5; /* EVT5 space */
sp += -12;
call _trap_c;
sp += 12;
/* Restore IMASK */
r0 = [p4 + (deferred_regs_IMASK * 4)];
sti r0;
RESTORE_ALL_SYS
rti;
ENDPROC(_exception_to_level5)
#endif
/* default entry point for interrupts */
ENTRY(_evt_default)
SAVE_ALL_SYS
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
sp += -12;
call _bfin_panic;
sp += 12;
RESTORE_ALL_SYS
rti;
ENDPROC(_evt_default)