blob: 62b2954be9985451d3ba727fdd73c069dd19bcd6 [file] [log] [blame]
/*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx51_pins.h>
#include <asm/arch/iomux.h>
#include <asm/arch/sys_proto.h>
/* IOMUX register (base) addresses */
enum iomux_reg_addr {
IOMUXGPR0 = IOMUXC_BASE_ADDR,
IOMUXGPR1 = IOMUXC_BASE_ADDR + 0x004,
IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR,
IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + MUX_I_END,
IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + PAD_I_START,
IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR,
};
#define MUX_PIN_NUM_MAX (((MUX_I_END - MUX_I_START) >> 2) + 1)
/* Get the iomux register address of this pin */
static inline u32 get_mux_reg(iomux_pin_name_t pin)
{
u32 mux_reg = PIN_TO_IOMUX_MUX(pin);
if (is_soc_rev(CHIP_REV_2_0) < 0) {
/*
* Fixup register address:
* i.MX51 TO1 has offset with the register
* which is define as TO2.
*/
if ((pin == MX51_PIN_NANDF_RB5) ||
(pin == MX51_PIN_NANDF_RB6) ||
(pin == MX51_PIN_NANDF_RB7))
; /* Do nothing */
else if (mux_reg >= 0x2FC)
mux_reg += 8;
else if (mux_reg >= 0x130)
mux_reg += 0xC;
}
mux_reg += IOMUXSW_MUX_CTL;
return mux_reg;
}
/* Get the pad register address of this pin */
static inline u32 get_pad_reg(iomux_pin_name_t pin)
{
u32 pad_reg = PIN_TO_IOMUX_PAD(pin);
if (is_soc_rev(CHIP_REV_2_0) < 0) {
/*
* Fixup register address:
* i.MX51 TO1 has offset with the register
* which is define as TO2.
*/
if ((pin == MX51_PIN_NANDF_RB5) ||
(pin == MX51_PIN_NANDF_RB6) ||
(pin == MX51_PIN_NANDF_RB7))
; /* Do nothing */
else if (pad_reg == 0x4D0 - PAD_I_START)
pad_reg += 0x4C;
else if (pad_reg == 0x860 - PAD_I_START)
pad_reg += 0x9C;
else if (pad_reg >= 0x804 - PAD_I_START)
pad_reg += 0xB0;
else if (pad_reg >= 0x7FC - PAD_I_START)
pad_reg += 0xB4;
else if (pad_reg >= 0x4E4 - PAD_I_START)
pad_reg += 0xCC;
else
pad_reg += 8;
}
pad_reg += IOMUXSW_PAD_CTL;
return pad_reg;
}
/* Get the last iomux register address */
static inline u32 get_mux_end(void)
{
if (is_soc_rev(CHIP_REV_2_0) < 0)
return IOMUXC_BASE_ADDR + (0x3F8 - 4);
else
return IOMUXC_BASE_ADDR + (0x3F0 - 4);
}
/*
* This function is used to configure a pin through the IOMUX module.
* @param pin a pin number as defined in iomux_pin_name_t
* @param cfg an output function as defined in iomux_pin_cfg_t
*
* @return 0 if successful; Non-zero otherwise
*/
static void iomux_config_mux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
{
u32 mux_reg = get_mux_reg(pin);
if ((mux_reg > get_mux_end()) || (mux_reg < IOMUXSW_MUX_CTL))
return ;
if (cfg == IOMUX_CONFIG_GPIO)
writel(PIN_TO_ALT_GPIO(pin), mux_reg);
else
writel(cfg, mux_reg);
}
/*
* Request ownership for an IO pin. This function has to be the first one
* being called before that pin is used. The caller has to check the
* return value to make sure it returns 0.
*
* @param pin a name defined by iomux_pin_name_t
* @param cfg an input function as defined in iomux_pin_cfg_t
*
*/
void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
{
iomux_config_mux(pin, cfg);
}
/*
* Release ownership for an IO pin
*
* @param pin a name defined by iomux_pin_name_t
* @param cfg an input function as defined in iomux_pin_cfg_t
*/
void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
{
}
/*
* This function configures the pad value for a IOMUX pin.
*
* @param pin a pin number as defined in iomux_pin_name_t
* @param config the ORed value of elements defined in iomux_pad_config_t
*/
void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config)
{
u32 pad_reg = get_pad_reg(pin);
writel(config, pad_reg);
}
unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin)
{
u32 pad_reg = get_pad_reg(pin);
return readl(pad_reg);
}