| /* IBM_PROLOG_BEGIN_TAG */ |
| /* This is an automatically generated prolog. */ |
| /* */ |
| /* $Source: src/import/chips/p9/procedures/utils/stopreg/p9_stop_api.C $ */ |
| /* */ |
| /* OpenPOWER HostBoot Project */ |
| /* */ |
| /* Contributors Listed Below - COPYRIGHT 2015,2018 */ |
| /* [+] International Business Machines Corp. */ |
| /* */ |
| /* */ |
| /* Licensed under the Apache License, Version 2.0 (the "License"); */ |
| /* you may not use this file except in compliance with the License. */ |
| /* You may obtain a copy of the License at */ |
| /* */ |
| /* http://www.apache.org/licenses/LICENSE-2.0 */ |
| /* */ |
| /* Unless required by applicable law or agreed to in writing, software */ |
| /* distributed under the License is distributed on an "AS IS" BASIS, */ |
| /* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */ |
| /* implied. See the License for the specific language governing */ |
| /* permissions and limitations under the License. */ |
| /* */ |
| /* IBM_PROLOG_END_TAG */ |
| |
| /// |
| /// @file p9_stop_api.C |
| /// @brief implements STOP API which create/manipulate STOP image. |
| /// |
| // *HWP HW Owner : Greg Still <stillgs@us.ibm.com> |
| // *HWP FW Owner : Prem Shanker Jha <premjha2@in.ibm.com> |
| // *HWP Team : PM |
| // *HWP Level : 2 |
| // *HWP Consumed by : HB:HYP |
| |
| // *INDENT-OFF* |
| #ifdef PPC_HYP |
| #include <HvPlicModule.H> |
| #endif |
| |
| #include "p9_stop_api.H" |
| #include "p9_cpu_reg_restore_instruction.H" |
| #include "p9_stop_data_struct.H" |
| #include <string.h> |
| #include "p9_stop_util.H" |
| #ifdef __cplusplus |
| extern "C" { |
| |
| namespace stopImageSection |
| { |
| #endif |
| // a true in the table below means register is of scope thread |
| // whereas a false meanse register is of scope core. |
| |
| const StopSprReg_t g_sprRegister[] = |
| { |
| { P9_STOP_SPR_CIABR, true, 0 }, |
| { P9_STOP_SPR_DAWR, true, 1 }, |
| { P9_STOP_SPR_DAWRX, true, 2 }, |
| { P9_STOP_SPR_HSPRG0, true, 3 }, |
| { P9_STOP_SPR_LDBAR, true, 4, }, |
| { P9_STOP_SPR_LPCR, true, 5 }, |
| { P9_STOP_SPR_PSSCR, true, 6 }, |
| { P9_STOP_SPR_MSR, true, 7 }, |
| { P9_STOP_SPR_HRMOR, false, 20 }, |
| { P9_STOP_SPR_HID, false, 21 }, |
| { P9_STOP_SPR_HMEER, false, 22 }, |
| { P9_STOP_SPR_PMCR, false, 23 }, |
| { P9_STOP_SPR_PTCR, false, 24 }, |
| { P9_STOP_SPR_SMFCTRL, true, 28 }, |
| { P9_STOP_SPR_USPRG0, true, 29 }, |
| { P9_STOP_SPR_USPRG1, true, 30 }, |
| { P9_STOP_SPR_URMOR, false, 31 }, |
| }; |
| |
| const uint32_t MAX_SPR_SUPPORTED = 17; |
| const uint32_t LEGACY_CORE_SCOM_SUPPORTED = 15; |
| const uint32_t LEGACY_QUAD_SCOM_SUPPORTED = 63; |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief vaildated input arguments passed to p9_stop_save_cpureg_control. |
| * @param[in] i_pImage point to start of HOMER |
| * @param[in] i_coreId id of the core |
| * @param[in] i_threadId id of the thread |
| * @param[in] i_saveMaskVector SPR save bit mask vector |
| * @return STOP_SAVE_SUCCESS if function succeeds, error code otherwise. |
| */ |
| STATIC StopReturnCode_t validateArgumentSaveRegMask( void* const i_pImage, |
| uint32_t const i_coreId, |
| uint32_t const i_threadId, |
| uint64_t i_saveMaskVector ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| |
| do |
| { |
| if( !i_pImage ) |
| { |
| l_rc = STOP_SAVE_ARG_INVALID_IMG; |
| break; |
| } |
| |
| if( i_coreId > MAX_CORE_ID_SUPPORTED ) |
| { |
| l_rc = STOP_SAVE_ARG_INVALID_CORE; |
| break; |
| } |
| |
| if( i_threadId > MAX_THREAD_ID_SUPPORTED ) |
| { |
| l_rc = STOP_SAVE_ARG_INVALID_THREAD; |
| break; |
| } |
| |
| if( ( 0 == i_saveMaskVector ) || ( BAD_SAVE_MASK & i_saveMaskVector ) ) |
| { |
| l_rc = STOP_SAVE_ARG_INVALID_REG; |
| break; |
| } |
| |
| } |
| while(0); |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief validates input arguments provided by STOP API caller. |
| * @param[in] i_pImage pointer to beginning of chip's HOMER image. |
| * @param[in] i_regId SPR register id |
| * @param[in] i_coreId core id |
| * @param[in|out] i_pThreadId points to thread id |
| * @param[in|out] i_pThreadLevelReg points to scope information of SPR |
| * @return STOP_SAVE_SUCCESS if arguments found valid, error code otherwise. |
| * @note for register of scope core, function shall force io_threadId to |
| * zero. |
| */ |
| STATIC StopReturnCode_t validateSprImageInputs( void* const i_pImage, |
| const CpuReg_t i_regId, |
| const uint32_t i_coreId, |
| uint32_t* i_pThreadId, |
| bool* i_pThreadLevelReg ) |
| { |
| uint32_t index = 0; |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| bool sprSupported = false; |
| *i_pThreadLevelReg = false; |
| |
| do |
| { |
| if( NULL == i_pImage ) |
| { |
| // Error: HOMER image start location is not valid |
| // Cannot proceed further. So, let us exit. |
| l_rc = STOP_SAVE_ARG_INVALID_IMG; |
| MY_ERR( "invalid image location " ); |
| |
| break; |
| } |
| |
| // STOP API manages STOP image based on physical core Id. PIR value |
| // is interpreted to calculate the physical core number and virtual |
| // thread number. |
| if( MAX_CORE_ID_SUPPORTED < i_coreId ) |
| { |
| // Error: invalid core number. given core number exceeds maximum |
| // cores supported by chip. |
| |
| // Physical core number is calculated based on following formula: |
| // core id = 4 * quad id (0..5) + core no within quad ( 0..3) |
| l_rc = STOP_SAVE_ARG_INVALID_CORE; |
| MY_ERR( "invalid core id " ); |
| break; |
| } |
| |
| if( MAX_THREAD_ID_SUPPORTED < *i_pThreadId ) |
| { |
| //Error: invalid core thread. Given core thread exceeds maximum |
| //threads supported in a core. |
| |
| // 64 bit PIR value is interpreted to calculate virtual thread |
| // Id. In fuse mode, b61 and b62 gives virtual thread id whereas in |
| // non fuse mode, b62 and b63 is read to determine the same. |
| |
| l_rc = STOP_SAVE_ARG_INVALID_THREAD; |
| MY_ERR( "invalid thread " ); |
| break; |
| } |
| |
| for( index = 0; index < MAX_SPR_SUPPORTED; ++index ) |
| { |
| if( i_regId == (CpuReg_t )g_sprRegister[index].iv_sprId ) |
| { |
| // given register is in the list of register supported |
| sprSupported = true; |
| *i_pThreadLevelReg = g_sprRegister[index].iv_isThreadScope; |
| *i_pThreadId = *i_pThreadLevelReg ? *i_pThreadId : 0; |
| break; |
| } |
| } |
| |
| if( !sprSupported ) |
| { |
| // Following SPRs are supported |
| // trace out all registers supported |
| MY_ERR("Register not supported" ); |
| // error code to caller. |
| l_rc = STOP_SAVE_ARG_INVALID_REG; |
| break; |
| } |
| |
| } |
| while(0); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "image 0x%08x, regId %08d, coreId %d, " |
| "threadId %d return code 0x%08x", i_pImage, i_regId, |
| i_coreId, *i_pThreadId, l_rc ); |
| } |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief generates ori instruction code. |
| * @param[in] i_Rs Source register number |
| * @param[in] i_Ra destination register number |
| * @param[in] i_data 16 bit immediate data |
| * @return returns 32 bit number representing ori instruction. |
| */ |
| STATIC uint32_t getOriInstruction( const uint16_t i_Rs, const uint16_t i_Ra, |
| const uint16_t i_data ) |
| { |
| uint32_t oriInstOpcode = 0; |
| oriInstOpcode = 0; |
| oriInstOpcode = ORI_OPCODE << 26; |
| oriInstOpcode |= i_Rs << 21; |
| oriInstOpcode |= i_Ra << 16; |
| oriInstOpcode |= i_data; |
| |
| return SWIZZLE_4_BYTE(oriInstOpcode); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief generates 32 bit key used for SPR lookup in core section. |
| */ |
| STATIC uint32_t genKeyForSprLookup( const CpuReg_t i_regId ) |
| { |
| return getOriInstruction( 0, 0, (uint16_t) i_regId ); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief generates xor instruction code. |
| * @param[in] i_Rs source register number for xor operation |
| * @param[in] i_Ra destination register number for xor operation result |
| * @param[in] i_Rb source register number for xor operation |
| * @return returns 32 bit number representing xor immediate instruction. |
| */ |
| STATIC uint32_t getXorInstruction( const uint16_t i_Ra, const uint16_t i_Rs, |
| const uint16_t i_Rb ) |
| { |
| uint32_t xorRegInstOpcode; |
| xorRegInstOpcode = XOR_CONST << 1; |
| xorRegInstOpcode |= OPCODE_31 << 26; |
| xorRegInstOpcode |= i_Rs << 21; |
| xorRegInstOpcode |= i_Ra << 16; |
| xorRegInstOpcode |= i_Rb << 11; |
| |
| return SWIZZLE_4_BYTE(xorRegInstOpcode); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief generates oris instruction code. |
| * @param[in] i_Rs source register number |
| * @param[in] i_Ra destination register number |
| * @param[in] i_data 16 bit immediate data |
| * @return returns 32 bit number representing oris immediate instruction. |
| */ |
| STATIC uint32_t getOrisInstruction( const uint16_t i_Rs, const uint16_t i_Ra, |
| const uint16_t i_data ) |
| { |
| uint32_t orisInstOpcode; |
| orisInstOpcode = 0; |
| orisInstOpcode = ORIS_OPCODE << 26; |
| orisInstOpcode |= ( i_Rs & 0x001F ) << 21 | ( i_Ra & 0x001F ) << 16; |
| orisInstOpcode |= i_data; |
| |
| return SWIZZLE_4_BYTE(orisInstOpcode); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief generates instruction for mtspr |
| * @param[in] i_Rs source register number |
| * @param[in] i_Spr represents spr where data is to be moved. |
| * @return returns 32 bit number representing mtspr instruction. |
| */ |
| STATIC uint32_t getMtsprInstruction( const uint16_t i_Rs, const uint16_t i_Spr ) |
| { |
| uint32_t mtsprInstOpcode = 0; |
| uint32_t temp = (( i_Spr & 0x03FF ) << 11); |
| mtsprInstOpcode = (uint8_t)i_Rs << 21; |
| mtsprInstOpcode |= ( temp & 0x0000F800 ) << 5; |
| mtsprInstOpcode |= ( temp & 0x001F0000 ) >> 5; |
| mtsprInstOpcode |= MTSPR_BASE_OPCODE; |
| |
| return SWIZZLE_4_BYTE(mtsprInstOpcode); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief generates instruction for mfmsr |
| * @param[in] i_Rt target register for SPR content. |
| * @return returns 32 bit number representing mfmsr instruction. |
| */ |
| STATIC uint32_t getMfmsrInstruction( const uint16_t i_Rt ) |
| { |
| uint32_t mfmsrInstOpcode = ((OPCODE_31 << 26) | (i_Rt << 21) | (MFMSR_CONST)); |
| |
| return SWIZZLE_4_BYTE(mfmsrInstOpcode); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief generates rldicr instruction. |
| * @param[in] i_Rs source register number |
| * @param[in] i_Ra destination register number |
| * @param[in] i_sh bit position by which contents of i_Rs are to be shifted |
| * @param[in] i_me bit position up to which mask should be 1. |
| * @return returns 32 bit number representing rldicr instruction. |
| */ |
| STATIC uint32_t getRldicrInstruction( const uint16_t i_Ra, const uint16_t i_Rs, |
| const uint16_t i_sh, uint16_t i_me ) |
| { |
| uint32_t rldicrInstOpcode = 0; |
| rldicrInstOpcode = ((RLDICR_OPCODE << 26 ) | ( i_Rs << 21 ) | ( i_Ra << 16 )); |
| rldicrInstOpcode |= ( ( i_sh & 0x001F ) << 11 ) | (RLDICR_CONST << 2 ); |
| rldicrInstOpcode |= (( i_sh & 0x0020 ) >> 4); |
| rldicrInstOpcode |= (i_me & 0x001F ) << 6; |
| rldicrInstOpcode |= (i_me & 0x0020 ); |
| return SWIZZLE_4_BYTE(rldicrInstOpcode); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| STATIC uint32_t getMfsprInstruction( const uint16_t i_Rt, const uint16_t i_sprNum ) |
| { |
| uint32_t mfsprInstOpcode = 0; |
| mfsprInstOpcode = (( OPCODE_31 << 26 ) | ( i_Rt << 21 ) | ( i_sprNum << 11 ) | ( MFSPR_CONST << 1 )); |
| return SWIZZLE_4_BYTE(mfsprInstOpcode); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| STATIC uint32_t getBranchLinkRegInstruction(void) |
| { |
| uint32_t branchConstInstOpcode = 0; |
| branchConstInstOpcode = (( OPCODE_18 << 26 ) | ( SELF_SAVE_FUNC_ADD ) | 0x03 ); |
| |
| return SWIZZLE_4_BYTE(branchConstInstOpcode); |
| } |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief looks up entry for given SPR in given thread/core section. |
| * @param[in] i_pThreadSectLoc start of given thread section or core section. |
| * @param[in] i_lookUpKey search key for lookup of given SPR entry. |
| * @param[in] i_isThreadReg true if register is of scope thread, false |
| * otherwise. |
| * @param[in|out] io_pSprEntryLoc Input: NULL |
| * Output: location of given entry or end of table. |
| * @return STOP_SAVE_SUCCESS if entry is found, STOP_SAVE_FAIL in case of |
| * an error. |
| */ |
| STATIC StopReturnCode_t lookUpSprInImage( uint32_t* i_pThreadSectLoc, const uint32_t i_lookUpKey, |
| const bool i_isThreadReg, void** io_pSprEntryLoc, |
| uint8_t i_selfRestVer ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_FAIL; |
| uint32_t temp = 0; |
| uint32_t* i_threadSectEnd = NULL; |
| uint32_t bctr_inst = SWIZZLE_4_BYTE(BLR_INST); |
| *io_pSprEntryLoc = NULL; |
| |
| do |
| { |
| if( !i_pThreadSectLoc ) |
| { |
| MY_ERR( "Bad SPR Start Location" ); |
| break; |
| } |
| |
| if( i_selfRestVer ) |
| { |
| temp = i_isThreadReg ? (uint32_t)(SMF_CORE_RESTORE_THREAD_AREA_SIZE) : |
| (uint32_t)(SMF_CORE_RESTORE_CORE_AREA_SIZE); |
| |
| } |
| else |
| { |
| temp = i_isThreadReg ? (uint32_t)(CORE_RESTORE_THREAD_AREA_SIZE) : |
| (uint32_t)(CORE_RESTORE_CORE_AREA_SIZE); |
| } |
| |
| |
| i_threadSectEnd = i_pThreadSectLoc + ( temp >> 2 ); |
| |
| temp = 0; |
| |
| while( ( i_pThreadSectLoc <= i_threadSectEnd ) && |
| ( temp != bctr_inst ) ) |
| { |
| temp = *i_pThreadSectLoc; |
| |
| if( ( temp == i_lookUpKey ) || ( temp == bctr_inst ) ) |
| { |
| *io_pSprEntryLoc = i_pThreadSectLoc; |
| l_rc = STOP_SAVE_SUCCESS; |
| break; |
| } |
| |
| i_pThreadSectLoc = i_pThreadSectLoc + SIZE_PER_SPR_RESTORE_INST; |
| } |
| } |
| while(0); |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief updates an SPR STOP image entry. |
| * @param[in] i_pSprEntryLocation location of entry. |
| * @param[in] i_regId register Id associated with SPR. |
| * @param[in] i_regData data needs to be written to SPR entry. |
| * @return STOP_SAVE_SUCCESS if update works, STOP_SAVE_FAIL otherwise. |
| */ |
| STATIC StopReturnCode_t updateSprEntryInImage( uint32_t* i_pSprEntryLocation, |
| const CpuReg_t i_regId, |
| const uint64_t i_regData, |
| const enum SprEntryUpdateMode i_mode |
| ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| uint32_t tempInst = 0; |
| uint64_t tempRegData = 0; |
| bool newEntry = true; |
| uint16_t regRs = 0; //to use R0 for SPR restore insruction generation |
| uint16_t regRa = 0; |
| |
| do |
| { |
| if( !i_pSprEntryLocation ) |
| { |
| MY_ERR("invalid location of SPR image entry" ); |
| l_rc = STOP_SAVE_FAIL; |
| break; |
| } |
| |
| tempInst = genKeyForSprLookup( i_regId ); |
| |
| if( *i_pSprEntryLocation == tempInst ) |
| { |
| newEntry = false; |
| } |
| |
| //Add SPR search instruction i.e. "ori r0, r0, SPRID" |
| *i_pSprEntryLocation = tempInst; |
| i_pSprEntryLocation += SIZE_PER_SPR_RESTORE_INST; |
| |
| if( INIT_SPR_REGION == i_mode ) |
| { |
| //adding inst 'b . + 0x1C' |
| *i_pSprEntryLocation = SWIZZLE_4_BYTE(SKIP_SPR_REST_INST); |
| } |
| else |
| { |
| //clear R0 i.e. "xor ra, rs, rb" |
| tempInst = getXorInstruction( regRs, regRs, regRs ); |
| *i_pSprEntryLocation = tempInst; |
| } |
| |
| |
| i_pSprEntryLocation += SIZE_PER_SPR_RESTORE_INST; |
| |
| tempRegData = i_regData >> 48; |
| //get lower order 16 bits of SPR restore value in R0 |
| tempInst = getOrisInstruction( regRs, regRa, (uint16_t)tempRegData ); |
| *i_pSprEntryLocation = tempInst; |
| i_pSprEntryLocation += SIZE_PER_SPR_RESTORE_INST; |
| |
| tempRegData = ((i_regData >> 32) & 0x0000FFFF ); |
| //get bit b16-b31 of SPR restore value in R0 |
| tempInst = getOriInstruction( regRs, regRa, (uint16_t)tempRegData ); |
| *i_pSprEntryLocation = tempInst; |
| i_pSprEntryLocation += SIZE_PER_SPR_RESTORE_INST; |
| |
| //Rotate R0 to left by 32 bit position and zero lower order 32 bits. |
| //Place the result in R0 |
| tempInst = getRldicrInstruction(regRa, regRs, 32, 31); |
| *i_pSprEntryLocation = tempInst; |
| i_pSprEntryLocation += SIZE_PER_SPR_RESTORE_INST; |
| |
| tempRegData = ((i_regData >> 16) & 0x000000FFFF ); |
| //get bit b32-b47 of SPR restore value to R0 |
| tempInst = getOrisInstruction( regRs, regRa, (uint16_t)tempRegData ); |
| *i_pSprEntryLocation = tempInst; |
| i_pSprEntryLocation += SIZE_PER_SPR_RESTORE_INST; |
| |
| tempRegData = (uint16_t)i_regData; |
| //get bit b48-b63 of SPR restore value to R0 |
| tempInst = getOriInstruction( regRs, regRa, (uint16_t)i_regData ); |
| *i_pSprEntryLocation = tempInst; |
| i_pSprEntryLocation += SIZE_PER_SPR_RESTORE_INST; |
| |
| if( P9_STOP_SPR_MSR == i_regId ) |
| { |
| //MSR cannot be restored completely with mtmsrd instruction. |
| //as it does not update ME, LE and HV bits. In self restore code |
| //inorder to restore MSR, contents of R21 is moved to SRR1. It also |
| //executes an RFID which causes contents of SRR1 to be copied to |
| //MSR. This allows copy of LE bit which are specifically interested |
| //in. Instruction below moves contents of MSR Value (in R0 ) to R21. |
| tempInst = SWIZZLE_4_BYTE( MR_R0_TO_R21 ); |
| } |
| else if ( P9_STOP_SPR_HRMOR == i_regId ) |
| { |
| //Case HRMOR, move contents of R0 to a placeholder GPR (R10) |
| //Thread Launcher expects HRMOR value in R10 |
| tempInst = SWIZZLE_4_BYTE( MR_R0_TO_R10 ); |
| } |
| else if( P9_STOP_SPR_URMOR == i_regId ) |
| { |
| //Case URMOR, move contents of R0 to a placeholder GPR (R9) |
| //Thread Launcher expects URMOR value in R9 |
| tempInst = SWIZZLE_4_BYTE( MR_R0_TO_R9 ); |
| } |
| else |
| { |
| // Case other SPRs, move contents of R0 to SPR |
| // For a UV system, even HRMOR is treated like any other SPR. |
| tempInst = |
| getMtsprInstruction( 0, (uint16_t)i_regId ); |
| } |
| |
| *i_pSprEntryLocation = tempInst; |
| |
| if( newEntry ) |
| { |
| i_pSprEntryLocation += SIZE_PER_SPR_RESTORE_INST; |
| //at the end of SPR restore, add instruction BLR to go back to thread |
| //launcher. |
| tempInst = SWIZZLE_4_BYTE(BLR_INST); |
| *i_pSprEntryLocation = tempInst; |
| } |
| } |
| while(0); |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| STATIC StopReturnCode_t initSelfSaveEntry( void* const i_pImage, uint16_t i_sprNum ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| uint32_t* i_pSprSave = (uint32_t*)i_pImage; |
| |
| //ori r0, r0, 0x00nn |
| *i_pSprSave = getOriInstruction( 0, 0, i_sprNum ); |
| |
| i_pSprSave++; |
| |
| //addi r31, r31, 0x20 |
| *i_pSprSave = SWIZZLE_4_BYTE(SKIP_SPR_SELF_SAVE); |
| i_pSprSave++; |
| |
| //nop |
| *i_pSprSave = getOriInstruction( 0, 0, 0 );; |
| i_pSprSave++; |
| |
| //mtlr, r30 |
| *i_pSprSave = SWIZZLE_4_BYTE( MTLR_INST ); |
| i_pSprSave++; |
| |
| //blr |
| *i_pSprSave = SWIZZLE_4_BYTE(BLR_INST); |
| i_pSprSave++; |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| STATIC StopReturnCode_t getSprRegIndexAdjustment( const uint32_t i_saveMaskPos, uint32_t* i_sprAdjIndex ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| |
| do |
| { |
| if( (( i_saveMaskPos >= SPR_BIT_POS_8 ) && ( i_saveMaskPos <= SPR_BIT_POS_19 )) || |
| (( i_saveMaskPos >= SPR_BIT_POS_25 ) && ( i_saveMaskPos <= SPR_BIT_POS_27 )) ) |
| { |
| l_rc = STOP_SAVE_SPR_BIT_POS_RESERVE; |
| break; |
| } |
| |
| if( (i_saveMaskPos > SPR_BIT_POS_19) && (i_saveMaskPos < SPR_BIT_POS_25 ) ) |
| { |
| *i_sprAdjIndex = 12; |
| } |
| else if( i_saveMaskPos > SPR_BIT_POS_27 ) |
| { |
| *i_sprAdjIndex = 15; |
| } |
| else |
| { |
| *i_sprAdjIndex = 0; |
| } |
| |
| } |
| while(0); |
| |
| return l_rc; |
| } |
| //----------------------------------------------------------------------------- |
| StopReturnCode_t p9_stop_save_cpureg( void* const i_pImage, |
| const CpuReg_t i_regId, |
| const uint64_t i_regData, |
| const uint64_t i_pir ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; // procedure return code |
| HomerSection_t* chipHomer = NULL; |
| SmfHomerSection_t* smfChipHomer = NULL; |
| |
| do |
| { |
| uint32_t threadId = 0; |
| uint32_t coreId = 0; |
| uint32_t lookUpKey = 0; |
| void* pSprEntryLocation = NULL; // an offset w.r.t. to start of image |
| void* pThreadLocation = NULL; |
| bool threadScopeReg = false; |
| uint8_t l_urmorFix = false; |
| uint64_t l_sprValue = 0; |
| uint8_t l_selfRestVer = 0; |
| |
| MY_INF(">> p9_stop_save_cpureg" ); |
| |
| l_rc = getCoreAndThread( i_pImage, i_pir, &coreId, &threadId ); |
| |
| if( l_rc ) |
| { |
| MY_ERR("Failed to determine Core Id and Thread Id from PIR 0x%016llx", |
| i_pir); |
| break; |
| } |
| |
| MY_INF( " PIR 0x%016llx coreId %d threadid %d " |
| " registerId %d", i_pir, coreId, |
| threadId, i_regId ); |
| |
| // First of all let us validate all input arguments. |
| l_rc = validateSprImageInputs( i_pImage, |
| i_regId, |
| coreId, |
| &threadId, |
| &threadScopeReg ); |
| |
| if( l_rc ) |
| { |
| // Error: bad argument traces out error code |
| MY_ERR("Bad input argument rc %d", l_rc ); |
| |
| break; |
| } |
| |
| l_urmorFix = *(uint8_t*)((uint8_t*)i_pImage + CPMR_HOMER_OFFSET + CPMR_URMOR_FIX_BYTE); |
| l_selfRestVer = *(uint8_t *)((uint8_t *)i_pImage + CPMR_HOMER_OFFSET + CPMR_SELF_RESTORE_VER_BYTE ); |
| |
| if( l_selfRestVer ) |
| { |
| smfChipHomer = ( SmfHomerSection_t*)i_pImage; |
| |
| if( threadScopeReg ) |
| { |
| pThreadLocation = |
| &(smfChipHomer->iv_coreThreadRestore[coreId].iv_threadRestoreArea[threadId][0]); |
| } |
| else |
| { |
| pThreadLocation = |
| &(smfChipHomer->iv_coreThreadRestore[coreId].iv_coreRestoreArea[0]); |
| } |
| } |
| else //Old fips or OPAL release that doesn't support SMF |
| { |
| chipHomer = (HomerSection_t*)i_pImage; |
| |
| if( threadScopeReg ) |
| { |
| pThreadLocation = |
| &(chipHomer->iv_coreThreadRestore[coreId][threadId].iv_threadArea[0]); |
| } |
| else |
| { |
| pThreadLocation = |
| &(chipHomer->iv_coreThreadRestore[coreId][threadId].iv_coreArea[0]); |
| } |
| } |
| |
| if( ( SWIZZLE_4_BYTE(BLR_INST) == *(uint32_t*)pThreadLocation ) || |
| ( SWIZZLE_4_BYTE(ATTN_OPCODE) == *(uint32_t*) pThreadLocation ) ) |
| { |
| // table for given core id doesn't exit. It needs to be |
| // defined. |
| pSprEntryLocation = pThreadLocation; |
| } |
| else |
| { |
| // an SPR restore section for given core already exists |
| lookUpKey = genKeyForSprLookup( i_regId ); |
| l_rc = lookUpSprInImage( (uint32_t*)pThreadLocation, |
| lookUpKey, |
| threadScopeReg, |
| &pSprEntryLocation, |
| l_selfRestVer ); |
| } |
| |
| if( l_rc ) |
| { |
| MY_ERR("Invalid or corrupt SPR entry. CoreId 0x%08x threadId ", |
| "0x%08x regId 0x%08x lookUpKey 0x%08x pThreadLocation 0x%08x" |
| , coreId, threadId, i_regId, lookUpKey, pThreadLocation ); |
| break; |
| } |
| |
| if( ( P9_STOP_SPR_URMOR == i_regId ) && ( l_urmorFix ) ) |
| { |
| l_sprValue = i_regData - URMOR_CORRECTION; |
| } |
| else |
| { |
| l_sprValue = i_regData; |
| } |
| |
| l_rc = updateSprEntryInImage( (uint32_t*) pSprEntryLocation, |
| i_regId, |
| l_sprValue, |
| UPDATE_SPR_ENTRY ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( " Failed to update the SPR entry of PIR 0x%08x reg" |
| "0x%08x", i_pir, i_regId ); |
| break; |
| } |
| |
| } |
| while(0); |
| |
| MY_INF("<< p9_stop_save_cpureg" ); |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief validates all the input arguments. |
| * @param[in] i_pImage pointer to start of HOMER of image for proc chip. |
| * @param[in] i_scomAddress SCOM address of register. |
| * @param[in] i_chipletId core or cache chiplet id |
| * @param[in] i_operation operation requested for SCOM entry. |
| * @param[in] i_section image section on which operation is to be performed |
| * @return STOP_SAVE_SUCCESS if arguments found valid, error code otherwise. |
| * @note Function does not validate that the given SCOM address really |
| * belongs to the given section. |
| */ |
| STATIC StopReturnCode_t validateScomImageInputs( void* const i_pImage, |
| const uint32_t i_scomAddress, |
| const uint8_t i_chipletId, |
| const ScomOperation_t i_operation, |
| const ScomSection_t i_section ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| |
| do |
| { |
| if( !i_pImage ) |
| { |
| //Error Invalid image pointer |
| l_rc = STOP_SAVE_ARG_INVALID_IMG; |
| MY_ERR("invalid image location "); |
| break; |
| } |
| |
| if( 0 == i_scomAddress ) |
| { |
| l_rc = STOP_SAVE_SCOM_INVALID_ADDRESS; |
| MY_ERR("invalid SCOM address"); |
| break; |
| } |
| |
| if(( CACHE_CHIPLET_ID_MIN > i_chipletId ) || |
| ( CORE_CHIPLET_ID_MAX < i_chipletId )) |
| { |
| l_rc = STOP_SAVE_SCOM_INVALID_CHIPLET; |
| MY_ERR("chiplet id not in range"); |
| break; |
| } |
| |
| if(( CORE_CHIPLET_ID_MIN > i_chipletId ) && |
| ( CACHE_CHIPLET_ID_MAX < i_chipletId )) |
| { |
| l_rc = STOP_SAVE_SCOM_INVALID_CHIPLET; |
| MY_ERR("chiplet id not valid"); |
| break; |
| } |
| |
| if(( P9_STOP_SCOM_OP_MIN >= i_operation ) || |
| ( P9_STOP_SCOM_OP_MAX <= i_operation )) |
| { |
| //invalid SCOM image operation requested |
| l_rc = STOP_SAVE_SCOM_INVALID_OPERATION; |
| MY_ERR("invalid SCOM image operation"); |
| break; |
| } |
| |
| if(( P9_STOP_SECTION_MIN >= i_section ) || |
| ( P9_STOP_SECTION_MAX <= i_section )) |
| { |
| // invalid cache sub section specified |
| l_rc = STOP_SAVE_SCOM_INVALID_SECTION; |
| MY_ERR("invalid section"); |
| break; |
| } |
| |
| if(( i_operation == P9_STOP_SCOM_RESET ) && |
| ( i_chipletId < CORE_CHIPLET_ID_MIN )) |
| { |
| // replace requested with a cache chiplet Id |
| l_rc = STOP_SAVE_SCOM_INVALID_OPERATION; |
| MY_ERR( "reset not supported for cache. chiplet Id 0x%08x", |
| i_chipletId ); |
| break; |
| } |
| |
| } |
| while(0); |
| |
| if( l_rc ) |
| { |
| MY_ERR("image 0x%08x SCOMAddress 0x%08x chipletId 0x%08x operation" |
| "0x%08x section 0x%08x", i_pImage, i_scomAddress, i_chipletId, |
| i_operation, i_section ); |
| } |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief edit SCOM entry associated with the given core. |
| * @param[in] i_scomAddr SCOM address of register. |
| * @param[in] i_scomData data associated with SCOM register. |
| * @param[in] i_pEntryLocation points to a SCOM entry in HOMER image. |
| * @param[in] i_operation operation to be performed on SCOM entry. |
| * @return STOP_SAVE_SUCCESS if existing entry is updated, STOP_SAVE_FAIL |
| * otherwise. |
| */ |
| STATIC StopReturnCode_t editScomEntry( uint32_t i_scomAddr, uint64_t i_scomData, |
| ScomEntry_t* i_pEntryLocation, |
| uint32_t i_operation ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| |
| do |
| { |
| if( !i_pEntryLocation ) |
| { |
| //Error: location of SCOM entry is not known |
| //therefore no point moving forward |
| MY_ERR("SCOM entry location not valid"); |
| l_rc = STOP_SAVE_FAIL; |
| break; |
| } |
| |
| switch( i_operation ) |
| { |
| case P9_STOP_SCOM_OR: |
| i_pEntryLocation->scomEntryData |= i_scomData; |
| break; |
| |
| case P9_STOP_SCOM_AND: |
| i_pEntryLocation->scomEntryData &= i_scomData; |
| break; |
| |
| case P9_STOP_SCOM_NOOP: |
| { |
| uint32_t nopInst = getOriInstruction( 0, 0, 0 ); |
| i_pEntryLocation->scomEntryHeader = SWIZZLE_4_BYTE(SCOM_ENTRY_START); |
| i_pEntryLocation->scomEntryData = nopInst; |
| i_pEntryLocation->scomEntryAddress = nopInst; |
| } |
| break; |
| |
| case P9_STOP_SCOM_APPEND: |
| i_pEntryLocation->scomEntryHeader = SWIZZLE_4_BYTE(SCOM_ENTRY_START); |
| i_pEntryLocation->scomEntryData = i_scomData; |
| i_pEntryLocation->scomEntryAddress = i_scomAddr; |
| break; |
| } |
| |
| } |
| while(0); |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief update SCOM entry associated with the given core. |
| * @param[in] i_scomAddr SCOM address of register. |
| * @param[in] i_scomData data associated with SCOM register. |
| * @param[in] i_scomEntry points to a SCOM entry in cache section of HOMER image. |
| * @return STOP_SAVE_SUCCESS if new entry is added, STOP_SAVE_FAIL otherwise. |
| * @note adds an entry at a given location. It can be used to add entry in |
| * place of NOP, at the end of table or as first entry of the cache |
| * sub-section(L2, L3 or EQ ). |
| */ |
| STATIC StopReturnCode_t updateScomEntry( uint32_t i_scomAddr, uint64_t i_scomData, |
| ScomEntry_t* i_scomEntry ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| |
| do |
| { |
| if( !i_scomEntry ) |
| { |
| MY_ERR( "cache entry cannot be located"); |
| l_rc = STOP_SAVE_SCOM_ENTRY_UPDATE_FAILED; |
| break; |
| } |
| |
| i_scomEntry->scomEntryHeader = SWIZZLE_4_BYTE(SCOM_ENTRY_START); // done for now |
| i_scomEntry->scomEntryAddress = i_scomAddr; |
| i_scomEntry->scomEntryData = i_scomData; |
| |
| } |
| while(0); |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| /** |
| * @brief populates SCOM restore entry header with version and layout info. |
| * @param[in] i_scomEntry points to SCOM restore entry |
| * @param[in] i_imageVer SGPE image version |
| * @param[in] i_maxScomEntry max SCOM entries supported |
| */ |
| |
| STATIC void updateEntryHeader( ScomEntry_t* i_scomEntry , |
| uint32_t i_imageVer, |
| uint32_t i_maxScomEntry ) |
| { |
| uint32_t l_temp = 0; |
| |
| if( i_imageVer >= STOP_API_VER_CONTROL ) |
| { |
| l_temp = ( 0x000000ff & i_maxScomEntry ); |
| l_temp |= ( STOP_API_VER & 0x7 ) << 28; |
| i_scomEntry->scomEntryHeader = SWIZZLE_4_BYTE(l_temp); |
| |
| MY_INF("SCOM Restore Header 0x%08x", l_temp ); |
| } |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| StopReturnCode_t p9_stop_save_scom( void* const i_pImage, |
| const uint32_t i_scomAddress, |
| const uint64_t i_scomData, |
| const ScomOperation_t i_operation, |
| const ScomSection_t i_section ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| uint32_t entryLimit = 0; |
| uint8_t chipletId = 0; |
| uint32_t nopInst = 0; |
| uint32_t index = 0; |
| uint32_t imageVer = 0; |
| uint32_t entrySwzHeader = 0; |
| uint32_t l_maxScomRestoreEntry = 0; |
| ScomEntry_t* pScomEntry = NULL; |
| ScomEntry_t* pEntryLocation = NULL; |
| ScomEntry_t* pNopLocation = NULL; |
| ScomEntry_t* pEditScomHeader = NULL; |
| StopCacheSection_t* pStopCacheScomStart = NULL; |
| ScomEntry_t* pTableEndLocationtable = NULL; |
| uint32_t swizzleAddr; |
| uint64_t swizzleData; |
| uint32_t swizzleAttn; |
| uint32_t swizzleBlr = SWIZZLE_4_BYTE(BLR_INST); |
| bool cacheEntry = true; |
| |
| MY_INF(">> p9_stop_save_scom"); |
| |
| //Reads SGPE image version info from QPMR Header in HOMER |
| //For backward compatibility, for base version of SGPE Hcode, |
| //STOP API retains default behavior but adds version specific |
| //details in each entry in later versions. |
| imageVer = *(uint32_t*)((uint8_t*)i_pImage + QPMR_HOMER_OFFSET + QPMR_BUILD_VER_BYTE); |
| imageVer = SWIZZLE_4_BYTE(imageVer); |
| |
| |
| do |
| { |
| chipletId = i_scomAddress >> 24; |
| chipletId = chipletId & 0x3F; |
| |
| l_rc = validateScomImageInputs( i_pImage, i_scomAddress, chipletId, i_operation, i_section ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "invalid argument: aborting"); |
| break; |
| } |
| |
| if( chipletId >= CORE_CHIPLET_ID_MIN ) |
| { |
| // chiplet is core. So, let us find the start address of SCOM area |
| // pertaining to a core in STOP image. |
| l_maxScomRestoreEntry = |
| *(uint32_t*)((uint8_t*)i_pImage + CPMR_HOMER_OFFSET + CPMR_MAX_SCOM_REST_PER_CORE_BYTE); |
| pScomEntry = CORE_ID_SCOM_START(i_pImage, chipletId ) |
| cacheEntry = false; |
| |
| if( !l_maxScomRestoreEntry ) |
| { |
| //Old HB and new STOP API case. Retain legacy Number |
| l_maxScomRestoreEntry = SWIZZLE_4_BYTE(LEGACY_CORE_SCOM_SUPPORTED); |
| } |
| } |
| else |
| { |
| l_maxScomRestoreEntry = |
| *(uint32_t*)((uint8_t*)i_pImage + QPMR_HOMER_OFFSET + QPMR_QUAD_MAX_SCOM_ENTRY_BYTE); |
| |
| if( !l_maxScomRestoreEntry ) |
| { |
| // Incase of a bad HOMER header initialization, fall back on legacy number. |
| l_maxScomRestoreEntry = SWIZZLE_4_BYTE(LEGACY_QUAD_SCOM_SUPPORTED); |
| } |
| // chiplet is a cache. let us find start address of cache section |
| // associated with given chiplet. A cache section associated with |
| // given chiplet is split in to L2, L3 and EQ area. |
| pStopCacheScomStart = CACHE_SECTN_START(i_pImage, |
| chipletId); |
| } |
| |
| l_maxScomRestoreEntry = SWIZZLE_4_BYTE(l_maxScomRestoreEntry); |
| |
| if(( !pStopCacheScomStart ) && ( !pScomEntry) ) |
| { |
| //Error invalid pointer to SCOM entry in cache or core section |
| //of STOP image. |
| MY_ERR("invalid start location for chiplet %d", |
| chipletId ); |
| break; |
| } |
| |
| switch( i_section ) |
| { |
| case P9_STOP_SECTION_EQ_SCOM: |
| pScomEntry = pStopCacheScomStart->nonCacheArea; |
| entryLimit = MAX_EQ_SCOM_ENTRIES; |
| break; |
| |
| case P9_STOP_SECTION_L2: |
| pScomEntry = pStopCacheScomStart->l2CacheArea; |
| entryLimit = MAX_L2_SCOM_ENTRIES; |
| break; |
| |
| case P9_STOP_SECTION_L3: |
| pScomEntry = pStopCacheScomStart->l3CacheArea; |
| entryLimit = MAX_L3_SCOM_ENTRIES; |
| break; |
| |
| case P9_STOP_SECTION_CORE_SCOM: |
| //macro CORE_ID_SCOM_START already gives start of scom |
| //entry for given core. entry limit too is assigned thereafter. |
| //Handling for core and cache segment is different for scom |
| //entries. It is because scom entries are organized differently |
| //in core and cache segment. |
| |
| entryLimit = l_maxScomRestoreEntry; |
| break; |
| |
| default: |
| l_rc = STOP_SAVE_SCOM_INVALID_SECTION; |
| break; |
| } |
| |
| |
| if(( imageVer > LEGACY_SCOM_RESTORE_VER ) && ( cacheEntry ) ) |
| { |
| //STOP API migrated to newer algorithm for creation of entries |
| |
| pScomEntry = CACHE_SCOM_ADDR(i_pImage, |
| chipletId, |
| l_maxScomRestoreEntry ) |
| |
| entryLimit = l_maxScomRestoreEntry; |
| } |
| |
| if(( !pScomEntry ) || ( l_rc ) ) |
| { |
| // Error Invalid pointer to cache entry |
| MY_ERR("invalid subsection %d or internal firmware failure", |
| i_section ); |
| l_rc = STOP_SAVE_FAIL; |
| break; |
| } |
| |
| nopInst = getOriInstruction( 0, 0, 0 ); |
| pEntryLocation = NULL; |
| pNopLocation = NULL; |
| pTableEndLocationtable = NULL; |
| swizzleAddr = SWIZZLE_4_BYTE(i_scomAddress); |
| swizzleData = SWIZZLE_8_BYTE(i_scomData); |
| swizzleAttn = SWIZZLE_4_BYTE(ATTN_OPCODE); |
| |
| for( index = 0; index < entryLimit; ++index ) |
| { |
| uint32_t entrySwzAddress = pScomEntry[index].scomEntryAddress; |
| entrySwzHeader = SWIZZLE_4_BYTE(pScomEntry[index].scomEntryHeader); |
| |
| if( ( swizzleAddr == entrySwzAddress ) && ( !pEntryLocation ) ) |
| |
| { |
| pEntryLocation = &pScomEntry[index]; |
| } |
| |
| if( (( nopInst == entrySwzAddress ) || |
| ( swizzleAttn == entrySwzAddress ) || |
| ( swizzleBlr == entrySwzAddress )) && ( !pNopLocation ) ) |
| { |
| pNopLocation = &pScomEntry[index]; |
| } |
| |
| // if entry is either 0xDEADDEAD or has SCOM entry limit in LSB of header |
| // place is already occupied |
| if( ( SCOM_ENTRY_START == entrySwzHeader ) || |
| ( entrySwzHeader & 0x000000FF ) ) |
| { |
| continue; |
| } |
| |
| pTableEndLocationtable = &pScomEntry[index]; |
| break; |
| } |
| |
| if( ( !pEntryLocation ) && ( !pTableEndLocationtable ) ) |
| { |
| MY_ERR(" exhausted all location available for section" |
| "0x%08x scom address 0x%08x", |
| i_section, i_scomAddress ); |
| l_rc = STOP_SAVE_SCOM_ENTRY_UPDATE_FAILED; |
| break; |
| } |
| |
| switch( i_operation ) |
| { |
| case P9_STOP_SCOM_APPEND: |
| { |
| ScomEntry_t* pScomAppend = NULL; |
| |
| if( pNopLocation ) |
| { |
| pScomAppend = pNopLocation; |
| } |
| else |
| { |
| pScomAppend = pTableEndLocationtable; |
| } |
| |
| l_rc = updateScomEntry ( swizzleAddr, |
| swizzleData, pScomAppend ); |
| |
| pEditScomHeader = pScomAppend; |
| } |
| break; |
| |
| case P9_STOP_SCOM_REPLACE: |
| { |
| ScomEntry_t* scomReplace = NULL; |
| |
| if( pEntryLocation ) |
| { |
| scomReplace = pEntryLocation; |
| } |
| else |
| { |
| scomReplace = pTableEndLocationtable; |
| } |
| |
| l_rc = updateScomEntry( swizzleAddr, |
| swizzleData, scomReplace ); |
| |
| pEditScomHeader = scomReplace; |
| } |
| break; |
| |
| case P9_STOP_SCOM_OR: |
| case P9_STOP_SCOM_AND: |
| case P9_STOP_SCOM_NOOP: |
| |
| if( pEntryLocation ) |
| { |
| l_rc = editScomEntry( swizzleAddr, |
| swizzleData, |
| pEntryLocation, |
| i_operation ); |
| |
| pEditScomHeader = pEntryLocation; |
| } |
| else |
| { |
| //Invalid operation requested. |
| MY_ERR( "entry not found edit chiplet Id 0x%08x " |
| "swizzle addr 0x%08x ", |
| chipletId, swizzleAddr ); |
| |
| l_rc = STOP_SAVE_SCOM_INVALID_OPERATION; |
| } |
| |
| break; |
| |
| case P9_STOP_SCOM_RESET: |
| |
| if( P9_STOP_SECTION_CORE_SCOM == i_section ) |
| { |
| memset( pScomEntry, 0x00, CORE_SCOM_RESTORE_SIZE_PER_CORE ); |
| } |
| |
| break; |
| |
| case P9_STOP_SCOM_OR_APPEND: |
| case P9_STOP_SCOM_AND_APPEND: |
| { |
| uint32_t tempOperation = P9_STOP_SCOM_APPEND; |
| ScomEntry_t* editAppend = NULL; |
| |
| if( NULL == pEntryLocation ) |
| { |
| editAppend = pTableEndLocationtable; |
| } |
| else |
| { |
| editAppend = pEntryLocation; |
| |
| if( P9_STOP_SCOM_OR_APPEND == i_operation ) |
| { |
| tempOperation = P9_STOP_SCOM_OR; |
| } |
| else |
| { |
| tempOperation = P9_STOP_SCOM_AND; |
| } |
| } |
| |
| l_rc = editScomEntry( swizzleAddr, |
| swizzleData, |
| editAppend, |
| tempOperation ); |
| |
| pEditScomHeader = editAppend; |
| } |
| break; |
| |
| default: |
| l_rc = STOP_SAVE_SCOM_INVALID_OPERATION; |
| break; |
| } |
| } |
| while(0); |
| |
| if( l_rc ) |
| { |
| MY_ERR("SCOM image operation 0x%08x failed for chiplet 0x%08x addr" |
| "0x%08x", i_operation, chipletId , |
| i_scomAddress ); |
| } |
| else |
| { |
| //Update SCOM Restore entry with version and memory layout |
| //info |
| updateEntryHeader( pEditScomHeader, imageVer, l_maxScomRestoreEntry ); |
| } |
| |
| MY_INF("<< p9_stop_save_scom"); |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief searches a self save entry of an SPR in self-save segment. |
| * @param[in] i_sprBitPos bit position associated with SPR in save mask vector. |
| * @param[in] l_pSprSaveStart start location of SPR save segment |
| * @param[in] i_searchLength length of SPR save segment |
| * @param[in] i_pSaveSprLoc start location of save entry for a given SPR. |
| * @return STOP_SAVE_SUCCESS if look up succeeds, error code otherwise. |
| */ |
| STATIC StopReturnCode_t lookUpSelfSaveSpr( uint32_t i_sprBitPos, uint32_t* l_pSprSaveStart, |
| uint32_t i_searchLength, uint32_t** i_pSaveSprLoc ) |
| { |
| int32_t l_saveWordLength = (int32_t)(i_searchLength >> 2); |
| uint32_t l_oriInst = getOriInstruction( 0, 0, i_sprBitPos ); |
| StopReturnCode_t l_rc = STOP_SAVE_FAIL; |
| |
| while( l_saveWordLength > 0 ) |
| { |
| if( l_oriInst == *l_pSprSaveStart ) |
| { |
| *i_pSaveSprLoc = l_pSprSaveStart; |
| l_rc = STOP_SAVE_SUCCESS; |
| break; |
| } |
| |
| l_pSprSaveStart++; |
| l_saveWordLength--; |
| } |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| /** |
| * @brief searches a self save entry of an SPR in self-save segment. |
| * @param[in] i_pSaveReg start of editable location of a SPR save entry. |
| * @param[in] i_sprNum Id of the SPR for which entry needs to be edited. |
| * @return STOP_SAVE_SUCCESS if look up succeeds, error code otherwise. |
| */ |
| STATIC StopReturnCode_t updateSelfSaveEntry( uint32_t* i_pSaveReg, uint16_t i_sprNum ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| |
| do |
| { |
| if( !i_pSaveReg ) |
| { |
| l_rc = STOP_SAVE_FAIL; |
| MY_ERR( "Failed to update self save area for SPR 0x%04x", i_sprNum ); |
| break; |
| } |
| |
| if( P9_STOP_SPR_MSR == i_sprNum ) |
| { |
| *i_pSaveReg = getMfmsrInstruction( 1 ); |
| } |
| else |
| { |
| *i_pSaveReg = getMfsprInstruction( 1, i_sprNum ); |
| } |
| |
| i_pSaveReg++; |
| |
| *i_pSaveReg = getBranchLinkRegInstruction( ); |
| } |
| while(0); |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| StopReturnCode_t p9_stop_save_cpureg_control( void* i_pImage, |
| const uint64_t i_pir, |
| const uint32_t i_saveRegVector ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| uint32_t l_coreId = 0; |
| uint32_t l_threadId = 0; |
| uint32_t l_sprPos = 0; |
| uint32_t l_sprIndex = 0; |
| uint32_t l_lookupLength = 0; |
| uint32_t l_lookUpKey = 0; |
| uint32_t* l_pSaveStart = NULL; |
| uint32_t* l_pRestoreStart = NULL; |
| uint32_t* l_pSprSave = NULL; |
| void* l_pTempLoc = NULL; |
| SmfHomerSection_t* l_pHomer = NULL; |
| uint8_t l_selfRestVer = 0; |
| |
| do |
| { |
| l_rc = getCoreAndThread( i_pImage, i_pir, &l_coreId, &l_threadId ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "Error in getting core no 0x%08x and thread no 0x%08x from PIR 0x%016lx", |
| l_coreId, l_threadId, i_pir ); |
| break; |
| } |
| |
| l_rc = validateArgumentSaveRegMask( i_pImage, l_coreId, l_threadId, i_saveRegVector ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "Invalid argument rc 0x%08x", (uint32_t) l_rc ); |
| break; |
| } |
| |
| l_pHomer = ( SmfHomerSection_t * )i_pImage; |
| l_selfRestVer = *(uint8_t *)((uint8_t *)i_pImage + CPMR_HOMER_OFFSET + CPMR_SELF_RESTORE_VER_BYTE ); |
| |
| for( l_sprIndex = 0; l_sprIndex < MAX_SPR_SUPPORTED; l_sprIndex++ ) |
| { |
| l_sprPos = g_sprRegister[l_sprIndex].iv_saveMaskPos; |
| |
| //Check if a given SPR needs to be self-saved each time on STOP entry |
| |
| if( i_saveRegVector & ( TEST_BIT_PATTERN >> l_sprPos ) ) |
| { |
| |
| if( g_sprRegister[l_sprIndex].iv_isThreadScope ) |
| { |
| l_lookupLength = SMF_SELF_SAVE_THREAD_AREA_SIZE; |
| l_pSaveStart = |
| (uint32_t*)&l_pHomer->iv_coreThreadRestore[l_coreId].iv_threadSaveArea[l_threadId][0]; |
| l_pRestoreStart = |
| (uint32_t*)&l_pHomer->iv_coreThreadRestore[l_coreId].iv_threadRestoreArea[l_threadId][0]; |
| } |
| else |
| { |
| l_lookupLength = SMF_CORE_SAVE_CORE_AREA_SIZE; |
| l_pSaveStart = (uint32_t*)&l_pHomer->iv_coreThreadRestore[l_coreId].iv_coreSaveArea[0]; |
| l_pRestoreStart = (uint32_t*)&l_pHomer->iv_coreThreadRestore[l_coreId].iv_coreRestoreArea[0]; |
| } |
| |
| // an SPR restore section for given core already exists |
| l_lookUpKey = genKeyForSprLookup( ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId ); |
| |
| l_rc = lookUpSprInImage( (uint32_t*)l_pRestoreStart, l_lookUpKey, |
| g_sprRegister[l_sprIndex].iv_isThreadScope, &l_pTempLoc, |
| l_selfRestVer ); |
| |
| if( l_rc ) |
| { |
| //SPR specified in the save mask but there is no restore entry present in the memory |
| //Self-Save instruction will edit it during STOP entry to make it a valid entry |
| |
| l_rc = p9_stop_save_cpureg( i_pImage, |
| (CpuReg_t)g_sprRegister[l_sprIndex].iv_sprId, |
| 0x00, //creates a dummy entry |
| i_pir ); |
| } |
| |
| //Find if SPR-Save eye catcher exist in self-save segment of SPR restore region. |
| l_rc = lookUpSelfSaveSpr( l_sprPos, l_pSaveStart, l_lookupLength, &l_pSprSave ); |
| |
| if( l_rc ) |
| { |
| MY_INF( "Failed to find SPR No %02d save entry", l_sprPos ); |
| l_rc = STOP_SAVE_SPR_ENTRY_MISSING; |
| break; |
| } |
| |
| l_pSprSave++; //point to next instruction location |
| |
| //update specific instructions of self save region to enable saving for SPR |
| l_rc = updateSelfSaveEntry( l_pSprSave, g_sprRegister[l_sprIndex].iv_sprId ); |
| |
| }// end if( i_saveRegVector..) |
| }// end for |
| } |
| while(0); |
| |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------------------------------- |
| |
| StopReturnCode_t p9_stop_init_cpureg( void* const i_pImage, const uint32_t i_corePos ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| uint32_t* l_pRestoreStart = NULL; |
| void* l_pTempLoc = NULL; |
| SmfHomerSection_t* l_pHomer = NULL; |
| uint32_t l_threadPos = 0; |
| uint32_t l_lookUpKey = 0; |
| uint32_t l_sprIndex = 0; |
| uint8_t l_selfRestVer = 0; |
| |
| MY_INF( ">> p9_stop_init_cpureg" ); |
| |
| do |
| { |
| if( !i_pImage ) |
| { |
| l_rc = STOP_SAVE_ARG_INVALID_IMG; |
| break; |
| } |
| |
| if( i_corePos > MAX_CORE_ID_SUPPORTED ) |
| { |
| l_rc = STOP_SAVE_ARG_INVALID_CORE; |
| break; |
| } |
| |
| l_pHomer = ( SmfHomerSection_t * ) i_pImage; |
| l_selfRestVer = *(uint8_t *)((uint8_t *)i_pImage + CPMR_HOMER_OFFSET + CPMR_SELF_RESTORE_VER_BYTE ); |
| |
| for( l_sprIndex = 0; l_sprIndex < MAX_SPR_SUPPORTED; l_sprIndex++ ) |
| { |
| //Check if a given SPR needs to be self-saved each time on STOP entry |
| |
| l_lookUpKey = genKeyForSprLookup( ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId ); |
| |
| if( g_sprRegister[l_sprIndex].iv_isThreadScope ) |
| { |
| for( l_threadPos = 0; l_threadPos < MAX_THREADS_PER_CORE; l_threadPos++ ) |
| { |
| l_pRestoreStart = |
| (uint32_t*)&l_pHomer->iv_coreThreadRestore[i_corePos].iv_threadRestoreArea[l_threadPos][0]; |
| |
| l_rc = lookUpSprInImage( (uint32_t*)l_pRestoreStart, l_lookUpKey, |
| g_sprRegister[l_sprIndex].iv_isThreadScope, |
| &l_pTempLoc, |
| l_selfRestVer ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "Thread SPR lookup failed in p9_stop_init_cpureg SPR %d Core %d Thread %d Index %d", |
| g_sprRegister[l_sprIndex].iv_sprId, i_corePos, l_threadPos, l_sprIndex ); |
| break; |
| } |
| |
| l_rc = updateSprEntryInImage( (uint32_t*) l_pTempLoc, |
| ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId, |
| 0x00, |
| INIT_SPR_REGION ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "Thread SPR region init failed. Core %d SPR Id %d", |
| i_corePos, g_sprRegister[l_sprIndex].iv_sprId ); |
| break; |
| } |
| |
| }//end for thread |
| |
| if( l_rc ) |
| { |
| break; |
| } |
| |
| }//end if SPR threadscope |
| else |
| { |
| l_pRestoreStart = (uint32_t*)&l_pHomer->iv_coreThreadRestore[i_corePos].iv_coreRestoreArea[0]; |
| |
| l_rc = lookUpSprInImage( (uint32_t*)l_pRestoreStart, l_lookUpKey, |
| g_sprRegister[l_sprIndex].iv_isThreadScope, |
| &l_pTempLoc, l_selfRestVer ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "Core SPR lookup failed in p9_stop_init_cpureg" ); |
| break; |
| } |
| |
| l_rc = updateSprEntryInImage( (uint32_t*) l_pTempLoc, |
| ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId, |
| 0x00, |
| INIT_SPR_REGION ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "Core SPR region init failed. Core %d SPR Id %d SPR Index %d", |
| i_corePos, g_sprRegister[l_sprIndex].iv_sprId, l_sprIndex ); |
| break; |
| } |
| |
| }// end else |
| |
| }// end for l_sprIndex |
| |
| } |
| while(0); |
| |
| MY_INF( "<< p9_stop_init_cpureg" ); |
| return l_rc; |
| } |
| |
| //----------------------------------------------------------------------------------------------------- |
| |
| StopReturnCode_t p9_stop_init_self_save( void* const i_pImage, const uint32_t i_corePos ) |
| { |
| StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; |
| uint32_t* l_pSaveStart = NULL; |
| SmfHomerSection_t * l_pHomer = NULL; |
| uint32_t l_threadPos = 0; |
| uint32_t l_sprBitPos = 0; |
| uint32_t l_sprIndexAdj = 0; |
| MY_INF( ">> p9_stop_init_self_save" ); |
| |
| do |
| { |
| if( !i_pImage ) |
| { |
| l_rc = STOP_SAVE_ARG_INVALID_IMG; |
| break; |
| } |
| |
| if( i_corePos > MAX_CORE_ID_SUPPORTED ) |
| { |
| l_rc = STOP_SAVE_ARG_INVALID_CORE; |
| break; |
| } |
| |
| l_pHomer = ( SmfHomerSection_t*) i_pImage; |
| |
| for( l_threadPos = 0; l_threadPos < MAX_THREADS_PER_CORE; l_threadPos++ ) |
| { |
| l_pSaveStart = |
| (uint32_t*)&l_pHomer->iv_coreThreadRestore[i_corePos].iv_threadSaveArea[l_threadPos][0]; |
| |
| //Adding instruction 'mflr r30' |
| *l_pSaveStart = SWIZZLE_4_BYTE(MFLR_R30); |
| l_pSaveStart++; |
| |
| for( l_sprBitPos = 0; l_sprBitPos <= MAX_SPR_BIT_POS; l_sprBitPos++ ) |
| { |
| l_rc = getSprRegIndexAdjustment( l_sprBitPos, &l_sprIndexAdj ); |
| |
| if( STOP_SAVE_SPR_BIT_POS_RESERVE == l_rc ) |
| { |
| //Failed to find SPR index adjustment |
| continue; |
| } |
| |
| if( !g_sprRegister[l_sprBitPos - l_sprIndexAdj].iv_isThreadScope ) |
| { |
| continue; |
| } |
| |
| //Initialize self save region with SPR save entry for each thread |
| //level SPR |
| l_rc = initSelfSaveEntry( l_pSaveStart, |
| g_sprRegister[l_sprBitPos - l_sprIndexAdj].iv_saveMaskPos ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "Failed to init thread self-save region for core %d thread %d", |
| i_corePos, l_threadPos ); |
| break; |
| } |
| |
| l_pSaveStart++; |
| l_pSaveStart++; |
| l_pSaveStart++; |
| } |
| |
| }// for thread = 0; |
| |
| if( l_rc ) |
| { |
| //breakout if saw an error while init of thread SPR region |
| break; |
| } |
| |
| l_pSaveStart = |
| (uint32_t*)&l_pHomer->iv_coreThreadRestore[i_corePos].iv_coreSaveArea[0]; |
| |
| *l_pSaveStart = SWIZZLE_4_BYTE(MFLR_R30); |
| l_pSaveStart++; |
| |
| for( l_sprBitPos = 0; l_sprBitPos <= MAX_SPR_BIT_POS; l_sprBitPos++ ) |
| { |
| l_rc = getSprRegIndexAdjustment( l_sprBitPos, &l_sprIndexAdj ); |
| |
| if( STOP_SAVE_SPR_BIT_POS_RESERVE == l_rc ) |
| { |
| //Failed to find SPR index adjustment |
| continue; |
| } |
| |
| if( g_sprRegister[l_sprBitPos - l_sprIndexAdj].iv_isThreadScope ) |
| { |
| continue; |
| } |
| |
| //Initialize self save region with SPR save entry for each core |
| //level SPR |
| l_rc = initSelfSaveEntry( l_pSaveStart, |
| g_sprRegister[l_sprBitPos - l_sprIndexAdj].iv_saveMaskPos ); |
| |
| if( l_rc ) |
| { |
| MY_ERR( "Failed to init core self-save region for core %d thread %d", |
| i_corePos, l_threadPos ); |
| break; |
| } |
| |
| l_pSaveStart++; |
| l_pSaveStart++; |
| l_pSaveStart++; |
| } |
| } |
| while(0); |
| |
| MY_INF( "<< p9_stop_init_self_save" ); |
| return l_rc; |
| } |
| |
| #ifdef __cplusplus |
| } //namespace stopImageSection ends |
| |
| } //extern "C" |
| #endif |
