blob: 285f7df129ab170f2ab97b78c8446c4dddd17929 [file] [log] [blame]
// SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
/*
* XSCOM driver
*
* Copyright 2013-2019 IBM Corp.
*/
#include <skiboot.h>
#include <xscom.h>
#include <io.h>
#include <processor.h>
#include <device.h>
#include <chip.h>
#include <centaur.h>
#include <errorlog.h>
#include <opal-api.h>
#include <timebase.h>
#include <nvram.h>
/* Mask of bits to clear in HMER before an access */
#define HMER_CLR_MASK (~(SPR_HMER_XSCOM_FAIL | \
SPR_HMER_XSCOM_DONE | \
SPR_HMER_XSCOM_STATUS))
DEFINE_LOG_ENTRY(OPAL_RC_XSCOM_RW, OPAL_PLATFORM_ERR_EVT, OPAL_XSCOM,
OPAL_CEC_HARDWARE, OPAL_PREDICTIVE_ERR_GENERAL,
OPAL_NA);
DEFINE_LOG_ENTRY(OPAL_RC_XSCOM_INDIRECT_RW, OPAL_PLATFORM_ERR_EVT, OPAL_XSCOM,
OPAL_CEC_HARDWARE, OPAL_PREDICTIVE_ERR_GENERAL,
OPAL_NA);
DEFINE_LOG_ENTRY(OPAL_RC_XSCOM_RESET, OPAL_PLATFORM_ERR_EVT, OPAL_XSCOM,
OPAL_CEC_HARDWARE, OPAL_PREDICTIVE_ERR_GENERAL,
OPAL_NA);
DEFINE_LOG_ENTRY(OPAL_RC_XSCOM_BUSY, OPAL_PLATFORM_ERR_EVT, OPAL_XSCOM,
OPAL_CEC_HARDWARE, OPAL_PREDICTIVE_ERR_GENERAL,
OPAL_NA);
/* xscom details to trigger xstop */
static struct {
uint64_t addr;
uint64_t fir_bit;
} xstop_xscom;
/*
* Locking notes:
*
* We used to have a per-target lock. However due to errata HW822317
* we can have issues on the issuer side if multiple threads try to
* send XSCOMs simultaneously (HMER responses get mixed up), so just
* use a global lock instead
*/
static struct lock xscom_lock = LOCK_UNLOCKED;
static inline void *xscom_addr(uint32_t gcid, uint32_t pcb_addr)
{
struct proc_chip *chip = get_chip(gcid);
uint64_t addr;
assert(chip);
addr = chip->xscom_base;
if (proc_gen == proc_gen_p8) {
addr |= ((uint64_t)pcb_addr << 4) & ~0xfful;
addr |= (pcb_addr << 3) & 0x78;
} else
addr |= ((uint64_t)pcb_addr << 3);
return (void *)addr;
}
static uint64_t xscom_wait_done(void)
{
uint64_t hmer;
do
hmer = mfspr(SPR_HMER);
while(!(hmer & SPR_HMER_XSCOM_DONE));
/*
* HW822317: We need to read a second time as the actual
* status can be delayed by 1 cycle after DONE
*/
return mfspr(SPR_HMER);
}
static void xscom_reset(uint32_t gcid, bool need_delay)
{
u64 hmer;
uint32_t recv_status_reg, log_reg, err_reg;
struct timespec ts;
/* Clear errors in HMER */
mtspr(SPR_HMER, HMER_CLR_MASK);
/* Setup local and target scom addresses */
if (proc_gen == proc_gen_p10) {
recv_status_reg = 0x00090018;
log_reg = 0x0090012;
err_reg = 0x0090013;
} else if (proc_gen == proc_gen_p9) {
recv_status_reg = 0x00090018;
log_reg = 0x0090012;
err_reg = 0x0090013;
} else {
recv_status_reg = 0x202000f;
log_reg = 0x2020007;
err_reg = 0x2020009;
}
/* First we need to write 0 to a register on our chip */
out_be64(xscom_addr(this_cpu()->chip_id, recv_status_reg), 0);
hmer = xscom_wait_done();
if (hmer & SPR_HMER_XSCOM_FAIL)
goto fail;
/* Then we need to clear those two other registers on the target */
out_be64(xscom_addr(gcid, log_reg), 0);
hmer = xscom_wait_done();
if (hmer & SPR_HMER_XSCOM_FAIL)
goto fail;
out_be64(xscom_addr(gcid, err_reg), 0);
hmer = xscom_wait_done();
if (hmer & SPR_HMER_XSCOM_FAIL)
goto fail;
if (need_delay) {
/*
* Its observed that sometimes immediate retry of
* XSCOM operation returns wrong data. Adding a
* delay for XSCOM reset to be effective. Delay of
* 10 ms is found to be working fine experimentally.
* FIXME: Replace 10ms delay by exact delay needed
* or other alternate method to confirm XSCOM reset
* completion, after checking from HW folks.
*/
ts.tv_sec = 0;
ts.tv_nsec = 10 * 1000;
nanosleep_nopoll(&ts, NULL);
}
return;
fail:
/* Fatal error resetting XSCOM */
log_simple_error(&e_info(OPAL_RC_XSCOM_RESET),
"XSCOM: Fatal error resetting engine after failed access !\n");
/* XXX Generate error log ? attn ? panic ?
* If we decide to panic, change the above severity to PANIC
*/
}
static int xscom_clear_error(uint32_t gcid, uint32_t pcb_addr)
{
u64 hmer;
uint32_t base_xscom_addr;
uint32_t xscom_clear_reg = 0x20010800;
/* only in case of p9 */
if (proc_gen != proc_gen_p9)
return 0;
/* xscom clear address range/mask */
#define XSCOM_CLEAR_RANGE_START 0x20010A00
#define XSCOM_CLEAR_RANGE_END 0x20010ABF
#define XSCOM_CLEAR_RANGE_MASK 0x200FFBFF
/*
* Due to a hardware issue where core responding to scom was delayed
* due to thread reconfiguration, leaves the scom logic in a state
* where the subsequent scom to that core can get errors. This is
* affected for Core PC scom registers in the range of
* 20010A80-20010ABF.
*
* The solution is if a xscom timeout occurs to one of Core PC scom
* registers in the range of 20010A80-20010ABF, a clearing scom
* write is done to 0x20010800 with data of '0x00000000' which will
* also get a timeout but clears the scom logic errors. After the
* clearing write is done the original scom operation can be retried.
*
* The scom timeout is reported as status 0x4 (Invalid address)
* in HMER[21-23].
*/
base_xscom_addr = pcb_addr & XSCOM_CLEAR_RANGE_MASK;
if (!((base_xscom_addr >= XSCOM_CLEAR_RANGE_START) &&
(base_xscom_addr <= XSCOM_CLEAR_RANGE_END)))
return 0;
/*
* Reset the XSCOM or next scom operation will fail.
* We also need a small delay before we go ahead with clearing write.
* We have observed that without a delay the clearing write has reported
* a wrong status.
*/
xscom_reset(gcid, true);
/* Clear errors in HMER */
mtspr(SPR_HMER, HMER_CLR_MASK);
/* Write 0 to clear the xscom logic errors on target chip */
out_be64(xscom_addr(gcid, xscom_clear_reg), 0);
hmer = xscom_wait_done();
/*
* Above clearing xscom write will timeout and error out with
* invalid access as there is no register at that address. This
* xscom operation just helps to clear the xscom logic error.
*
* On failure, reset the XSCOM or we'll hang on the next access
*/
if (hmer & SPR_HMER_XSCOM_FAIL)
xscom_reset(gcid, true);
return 1;
}
static int64_t xscom_handle_error(uint64_t hmer, uint32_t gcid, uint32_t pcb_addr,
bool is_write, int64_t retries,
int64_t *xscom_clear_retries)
{
unsigned int stat = GETFIELD(SPR_HMER_XSCOM_STATUS, hmer);
int64_t rc = OPAL_HARDWARE;
/* XXX Figure out error codes from doc and error
* recovery procedures
*/
switch(stat) {
case 1:
/*
* XSCOM engine is blocked, need to retry. Reset XSCOM
* engine after crossing retry threshold before
* retrying again.
*/
if (retries && !(retries % XSCOM_BUSY_RESET_THRESHOLD)) {
prlog(PR_NOTICE, "XSCOM: Busy even after %d retries, "
"resetting XSCOM now. Total retries = %lld\n",
XSCOM_BUSY_RESET_THRESHOLD, retries);
xscom_reset(gcid, true);
}
/* Log error if we have retried enough and its still busy */
if (retries == XSCOM_BUSY_MAX_RETRIES)
log_simple_error(&e_info(OPAL_RC_XSCOM_BUSY),
"XSCOM: %s-busy error gcid=0x%x pcb_addr=0x%x "
"stat=0x%x\n", is_write ? "write" : "read",
gcid, pcb_addr, stat);
return OPAL_XSCOM_BUSY;
case 2: /* CPU is asleep, reset XSCOM engine and return */
xscom_reset(gcid, false);
return OPAL_XSCOM_CHIPLET_OFF;
case 3: /* Partial good */
rc = OPAL_XSCOM_PARTIAL_GOOD;
break;
case 4: /* Invalid address / address error */
rc = OPAL_XSCOM_ADDR_ERROR;
if (xscom_clear_error(gcid, pcb_addr)) {
/* return busy if retries still pending. */
if ((*xscom_clear_retries)--)
return OPAL_XSCOM_BUSY;
prlog(PR_DEBUG, "XSCOM: error recovery failed for "
"gcid=0x%x pcb_addr=0x%x\n", gcid, pcb_addr);
}
break;
case 5: /* Clock error */
rc = OPAL_XSCOM_CLOCK_ERROR;
break;
case 6: /* Parity error */
rc = OPAL_XSCOM_PARITY_ERROR;
break;
case 7: /* Time out */
rc = OPAL_XSCOM_TIMEOUT;
break;
}
/*
* If we're in an XSCOM opal call then squash the error
* we assume that the caller (probably opal-prd) will
* handle logging it
*/
if (this_cpu()->current_token != OPAL_XSCOM_READ &&
this_cpu()->current_token != OPAL_XSCOM_WRITE) {
log_simple_error(&e_info(OPAL_RC_XSCOM_RW),
"XSCOM: %s error gcid=0x%x pcb_addr=0x%x stat=0x%x\n",
is_write ? "write" : "read", gcid, pcb_addr, stat);
}
/* We need to reset the XSCOM or we'll hang on the next access */
xscom_reset(gcid, false);
/* Non recovered ... just fail */
return rc;
}
static void xscom_handle_ind_error(uint64_t data, uint32_t gcid,
uint64_t pcb_addr, bool is_write)
{
unsigned int stat = GETFIELD(XSCOM_DATA_IND_ERR, data);
bool timeout = !(data & XSCOM_DATA_IND_COMPLETE);
/* XXX: Create error log entry ? */
if (timeout)
log_simple_error(&e_info(OPAL_RC_XSCOM_INDIRECT_RW),
"XSCOM: indirect %s timeout, gcid=0x%x pcb_addr=0x%llx"
" stat=0x%x\n",
is_write ? "write" : "read", gcid, pcb_addr, stat);
else
log_simple_error(&e_info(OPAL_RC_XSCOM_INDIRECT_RW),
"XSCOM: indirect %s error, gcid=0x%x pcb_addr=0x%llx"
" stat=0x%x\n",
is_write ? "write" : "read", gcid, pcb_addr, stat);
}
static bool xscom_gcid_ok(uint32_t gcid)
{
return get_chip(gcid) != NULL;
}
/* Determine if SCOM address is multicast */
static inline bool xscom_is_multicast_addr(uint32_t addr)
{
return (((addr >> 30) & 0x1) == 0x1);
}
/*
* Low level XSCOM access functions, perform a single direct xscom
* access via MMIO
*/
static int __xscom_read(uint32_t gcid, uint32_t pcb_addr, uint64_t *val)
{
uint64_t hmer;
int64_t ret, retries;
int64_t xscom_clear_retries = XSCOM_CLEAR_MAX_RETRIES;
if (!xscom_gcid_ok(gcid)) {
prerror("%s: invalid XSCOM gcid 0x%x\n", __func__, gcid);
return OPAL_PARAMETER;
}
for (retries = 0; retries <= XSCOM_BUSY_MAX_RETRIES; retries++) {
/* Clear status bits in HMER (HMER is special
* writing to it *ands* bits
*/
mtspr(SPR_HMER, HMER_CLR_MASK);
/* Read value from SCOM */
*val = in_be64(xscom_addr(gcid, pcb_addr));
/* Wait for done bit */
hmer = xscom_wait_done();
/* Check for error */
if (!(hmer & SPR_HMER_XSCOM_FAIL))
return OPAL_SUCCESS;
/* Handle error and possibly eventually retry */
ret = xscom_handle_error(hmer, gcid, pcb_addr, false, retries,
&xscom_clear_retries);
if (ret != OPAL_BUSY)
break;
}
/* Do not print error message for multicast SCOMS */
if (xscom_is_multicast_addr(pcb_addr) && ret == OPAL_XSCOM_CHIPLET_OFF)
return ret;
/*
* Workaround on P9: PRD does operations it *knows* will fail with this
* error to work around a hardware issue where accesses via the PIB
* (FSI or OCC) work as expected, accesses via the ADU (what xscom goes
* through) do not. The chip logic will always return all FFs if there
* is any error on the scom.
*/
if (proc_gen == proc_gen_p9 && ret == OPAL_XSCOM_CHIPLET_OFF)
return ret;
/*
* If an OPAL call XSCOM read fails, then the OPAL-PRD will
* handle logging the error. Hence just print an
* informational message here.
*/
if (this_cpu()->current_token == OPAL_XSCOM_READ)
prlog(PR_INFO, "XSCOM: Read failed, ret = %lld\n", ret);
else
prerror("XSCOM: Read failed, ret = %lld\n", ret);
return ret;
}
static int __xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val)
{
uint64_t hmer;
int64_t ret, retries = 0;
int64_t xscom_clear_retries = XSCOM_CLEAR_MAX_RETRIES;
if (!xscom_gcid_ok(gcid)) {
prerror("%s: invalid XSCOM gcid 0x%x\n", __func__, gcid);
return OPAL_PARAMETER;
}
for (retries = 0; retries <= XSCOM_BUSY_MAX_RETRIES; retries++) {
/* Clear status bits in HMER (HMER is special
* writing to it *ands* bits
*/
mtspr(SPR_HMER, HMER_CLR_MASK);
/* Write value to SCOM */
out_be64(xscom_addr(gcid, pcb_addr), val);
/* Wait for done bit */
hmer = xscom_wait_done();
/* Check for error */
if (!(hmer & SPR_HMER_XSCOM_FAIL))
return OPAL_SUCCESS;
/* Handle error and possibly eventually retry */
ret = xscom_handle_error(hmer, gcid, pcb_addr, true, retries,
&xscom_clear_retries);
if (ret != OPAL_BUSY)
break;
}
/* Do not print error message for multicast SCOMS */
if (xscom_is_multicast_addr(pcb_addr) && ret == OPAL_XSCOM_CHIPLET_OFF)
return ret;
/*
* Workaround on P9: PRD does operations it *knows* will fail with this
* error to work around a hardware issue where accesses via the PIB
* (FSI or OCC) work as expected, accesses via the ADU (what xscom goes
* through) do not. The chip logic will always return all FFs if there
* is any error on the scom.
*/
if (proc_gen == proc_gen_p9 && ret == OPAL_XSCOM_CHIPLET_OFF)
return ret;
/*
* If an OPAL call XSCOM write fails, then the OPAL-PRD will
* handle logging the error. Hence just print an
* informational message here.
*/
if (this_cpu()->current_token == OPAL_XSCOM_WRITE)
prlog(PR_INFO, "XSCOM: Write failed, ret = %lld\n", ret);
else
prerror("XSCOM: Write failed, ret = %lld\n", ret);
return ret;
}
/*
* Indirect XSCOM access functions
*/
static int xscom_indirect_read_form0(uint32_t gcid, uint64_t pcb_addr,
uint64_t *val)
{
uint32_t addr;
uint64_t data;
int rc, retries;
/* Write indirect address */
addr = pcb_addr & 0x7fffffff;
data = XSCOM_DATA_IND_READ |
(pcb_addr & XSCOM_ADDR_IND_ADDR);
rc = __xscom_write(gcid, addr, data);
if (rc)
goto bail;
/* Wait for completion */
for (retries = 0; retries < XSCOM_IND_MAX_RETRIES; retries++) {
rc = __xscom_read(gcid, addr, &data);
if (rc)
goto bail;
if ((data & XSCOM_DATA_IND_COMPLETE) &&
((data & XSCOM_DATA_IND_ERR) == 0)) {
*val = data & XSCOM_DATA_IND_DATA;
break;
}
if ((data & XSCOM_DATA_IND_COMPLETE) ||
(retries >= XSCOM_IND_MAX_RETRIES)) {
xscom_handle_ind_error(data, gcid, pcb_addr,
false);
rc = OPAL_HARDWARE;
goto bail;
}
}
bail:
if (rc)
*val = (uint64_t)-1;
return rc;
}
static int xscom_indirect_form(uint64_t pcb_addr)
{
return (pcb_addr >> 60) & 1;
}
static int xscom_indirect_read(uint32_t gcid, uint64_t pcb_addr, uint64_t *val)
{
uint64_t form = xscom_indirect_form(pcb_addr);
if ((proc_gen >= proc_gen_p9) && (form == 1))
return OPAL_UNSUPPORTED;
return xscom_indirect_read_form0(gcid, pcb_addr, val);
}
static int xscom_indirect_write_form0(uint32_t gcid, uint64_t pcb_addr,
uint64_t val)
{
uint32_t addr;
uint64_t data;
int rc, retries;
/* Only 16 bit data with indirect */
if (val & ~(XSCOM_ADDR_IND_DATA))
return OPAL_PARAMETER;
/* Write indirect address & data */
addr = pcb_addr & 0x7fffffff;
data = pcb_addr & XSCOM_ADDR_IND_ADDR;
data |= val & XSCOM_ADDR_IND_DATA;
rc = __xscom_write(gcid, addr, data);
if (rc)
goto bail;
/* Wait for completion */
for (retries = 0; retries < XSCOM_IND_MAX_RETRIES; retries++) {
rc = __xscom_read(gcid, addr, &data);
if (rc)
goto bail;
if ((data & XSCOM_DATA_IND_COMPLETE) &&
((data & XSCOM_DATA_IND_ERR) == 0))
break;
if ((data & XSCOM_DATA_IND_COMPLETE) ||
(retries >= XSCOM_IND_MAX_RETRIES)) {
xscom_handle_ind_error(data, gcid, pcb_addr,
true);
rc = OPAL_HARDWARE;
goto bail;
}
}
bail:
return rc;
}
static int xscom_indirect_write_form1(uint32_t gcid, uint64_t pcb_addr,
uint64_t val)
{
uint32_t addr;
uint64_t data;
if (proc_gen < proc_gen_p9)
return OPAL_UNSUPPORTED;
if (val & ~(XSCOM_DATA_IND_FORM1_DATA))
return OPAL_PARAMETER;
/* Mangle address and data for form1 */
addr = (pcb_addr & 0x000ffffffffUL);
data = (pcb_addr & 0xfff00000000UL) << 20;
data |= val;
return __xscom_write(gcid, addr, data);
}
static int xscom_indirect_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val)
{
uint64_t form = xscom_indirect_form(pcb_addr);
if ((proc_gen >= proc_gen_p9) && (form == 1))
return xscom_indirect_write_form1(gcid, pcb_addr, val);
return xscom_indirect_write_form0(gcid, pcb_addr, val);
}
static uint32_t xscom_decode_chiplet(uint32_t partid, uint64_t *pcb_addr)
{
uint32_t gcid = (partid & 0x0fffffff) >> 4;
uint32_t core = partid & 0xf;
if (proc_gen >= proc_gen_p9) {
/* XXX Not supported */
*pcb_addr = 0;
} else {
*pcb_addr |= P8_EX_PCB_SLAVE_BASE;
*pcb_addr |= core << 24;
}
return gcid;
}
void _xscom_lock(void)
{
lock(&xscom_lock);
}
void _xscom_unlock(void)
{
unlock(&xscom_lock);
}
/* sorted by the scom controller's partid */
static LIST_HEAD(scom_list);
int64_t scom_register(struct scom_controller *new)
{
struct scom_controller *cur;
list_for_each(&scom_list, cur, link) {
if (cur->part_id == new->part_id) {
prerror("Attempted to add duplicate scom, partid %x\n",
new->part_id);
return OPAL_BUSY;
}
if (cur->part_id > new->part_id) {
list_add_before(&scom_list, &cur->link, &new->link);
return 0;
}
}
/* if we never find a larger partid then this is the largest */
list_add_tail(&scom_list, &new->link);
return 0;
}
static struct scom_controller *scom_find(uint32_t partid)
{
struct scom_controller *cur;
list_for_each(&scom_list, cur, link)
if (partid == cur->part_id)
return cur;
return NULL;
}
static int64_t scom_read(struct scom_controller *scom, uint32_t partid,
uint64_t pcbaddr, uint64_t *val)
{
int64_t rc = scom->read(scom, partid, pcbaddr, val);
if (rc) {
prerror("%s: to %x off: %llx rc = %lld\n",
__func__, partid, pcbaddr, rc);
}
return rc;
}
static int64_t scom_write(struct scom_controller *scom, uint32_t partid,
uint64_t pcbaddr, uint64_t val)
{
int64_t rc = scom->write(scom, partid, pcbaddr, val);
if (rc) {
prerror("%s: to %x off: %llx rc = %lld\n",
__func__, partid, pcbaddr, rc);
}
return rc;
}
/*
* External API
*/
int _xscom_read(uint32_t partid, uint64_t pcb_addr, uint64_t *val, bool take_lock)
{
struct scom_controller *scom;
uint32_t gcid;
int rc;
if (!opal_addr_valid(val))
return OPAL_PARAMETER;
/* Due to a bug in some versions of the PRD wrapper app, errors
* might not be properly forwarded to PRD, in which case the data
* set here will be used. Rather than a random value let's thus
* initialize the data to a known clean state.
*/
*val = 0xdeadbeefdeadbeefull;
/* Handle part ID decoding */
switch(partid >> 28) {
case 0: /* Normal processor chip */
gcid = partid;
break;
case 4: /* EX chiplet */
gcid = xscom_decode_chiplet(partid, &pcb_addr);
if (pcb_addr == 0)
return OPAL_UNSUPPORTED;
break;
default:
/* is it one of our hacks? */
scom = scom_find(partid);
if (scom)
return scom_read(scom, partid, pcb_addr, val);
/**
* @fwts-label XSCOMReadInvalidPartID
* @fwts-advice xscom_read was called with an invalid partid.
* There's likely a bug somewhere in the stack that's causing
* someone to try an xscom_read on something that isn't a
* processor, Centaur or EX chiplet.
*/
prerror("%s: invalid XSCOM partid 0x%x\n", __func__, partid);
return OPAL_PARAMETER;
}
/* HW822317 requires us to do global locking */
if (take_lock)
lock(&xscom_lock);
/* Direct vs indirect access */
if (pcb_addr & XSCOM_ADDR_IND_FLAG)
rc = xscom_indirect_read(gcid, pcb_addr, val);
else
rc = __xscom_read(gcid, pcb_addr & 0x7fffffff, val);
/* Unlock it */
if (take_lock)
unlock(&xscom_lock);
return rc;
}
static int64_t opal_xscom_read(uint32_t partid, uint64_t pcb_addr, __be64 *__val)
{
uint64_t val;
int64_t rc;
rc = xscom_read(partid, pcb_addr, &val);
*__val = cpu_to_be64(val);
return rc;
}
opal_call(OPAL_XSCOM_READ, opal_xscom_read, 3);
int _xscom_write(uint32_t partid, uint64_t pcb_addr, uint64_t val, bool take_lock)
{
struct scom_controller *scom;
uint32_t gcid;
int rc;
/* Handle part ID decoding */
switch(partid >> 28) {
case 0: /* Normal processor chip */
gcid = partid;
break;
case 4: /* EX chiplet */
gcid = xscom_decode_chiplet(partid, &pcb_addr);
break;
default:
/* is it one of our hacks? */
scom = scom_find(partid);
if (scom)
return scom_write(scom, partid, pcb_addr, val);
/**
* @fwts-label XSCOMWriteInvalidPartID
* @fwts-advice xscom_write was called with an invalid partid.
* There's likely a bug somewhere in the stack that's causing
* someone to try an xscom_write on something that isn't a
* processor, Centaur or EX chiplet.
*/
prerror("%s: invalid XSCOM partid 0x%x\n", __func__, partid);
return OPAL_PARAMETER;
}
/* HW822317 requires us to do global locking */
if (take_lock)
lock(&xscom_lock);
/* Direct vs indirect access */
if (pcb_addr & XSCOM_ADDR_IND_FLAG)
rc = xscom_indirect_write(gcid, pcb_addr, val);
else
rc = __xscom_write(gcid, pcb_addr & 0x7fffffff, val);
/* Unlock it */
if (take_lock)
unlock(&xscom_lock);
return rc;
}
static int64_t opal_xscom_write(uint32_t partid, uint64_t pcb_addr, uint64_t val)
{
return xscom_write(partid, pcb_addr, val);
}
opal_call(OPAL_XSCOM_WRITE, opal_xscom_write, 3);
/*
* Perform a xscom read-modify-write.
*/
int xscom_write_mask(uint32_t partid, uint64_t pcb_addr, uint64_t val, uint64_t mask)
{
int rc;
uint64_t old_val;
rc = xscom_read(partid, pcb_addr, &old_val);
if (rc)
return rc;
val = (old_val & ~mask) | (val & mask);
return xscom_write(partid, pcb_addr, val);
}
int xscom_readme(uint64_t pcb_addr, uint64_t *val)
{
return xscom_read(this_cpu()->chip_id, pcb_addr, val);
}
int xscom_writeme(uint64_t pcb_addr, uint64_t val)
{
return xscom_write(this_cpu()->chip_id, pcb_addr, val);
}
int64_t xscom_read_cfam_chipid(uint32_t partid, uint32_t *chip_id)
{
uint64_t val;
int64_t rc = OPAL_SUCCESS;
/* Mambo chip model lacks the f000f register, just make
* something up
*/
if (chip_quirk(QUIRK_NO_F000F)) {
if (proc_gen == proc_gen_p10)
val = 0x220DA04980000000UL; /* P10 DD2.0 */
else if (proc_gen == proc_gen_p9)
val = 0x203D104980000000UL; /* P9 Nimbus DD2.3 */
else
val = 0x221EF04980000000UL; /* P8 Murano DD2.1 */
} else
rc = xscom_read(partid, 0xf000f, &val);
/* Extract CFAM id */
if (rc == OPAL_SUCCESS)
*chip_id = (uint32_t)(val >> 44);
return rc;
}
/* The recipe comes from the p10_getecid hardware procedure */
static uint8_t xscom_get_ec_rev(struct proc_chip *chip)
{
uint64_t ecid2 = 0;
int8_t rev;
const int8_t *table;
/* 0 1 2 3 4 5 6 7 */
const int8_t p9table[8] = {0, 1, -1, 2, -1, -1, -1, 3};
const int8_t p10dd1table[8] = {0, 1, 2, 3, -1, -1, 4, -1};
const int8_t p10dd2table[8] = {0, 2, 3, 4, -1, -1, 5, -1};
if (chip_quirk(QUIRK_MAMBO_CALLOUTS))
return 0;
switch (proc_gen) {
case proc_gen_p9:
table = p9table;
break;
case proc_gen_p10:
if (chip->ec_level < 0x20)
table = p10dd1table;
else
table = p10dd2table;
break;
default:
return 0;
}
xscom_read(chip->id, 0x18002, &ecid2);
rev = table[(ecid2 >> 45) & 7];
if (rev < 0)
return 0;
prlog(PR_INFO, "P%d DD%i.%i%d detected\n",
proc_gen == proc_gen_p9 ? 9 : 10,
0xf & (chip->ec_level >> 4),
chip->ec_level & 0xf,
rev);
return rev;
}
static void xscom_init_chip_info(struct proc_chip *chip)
{
uint32_t val;
int64_t rc;
rc = xscom_read_cfam_chipid(chip->id, &val);
if (rc) {
prerror("XSCOM: Error %lld reading 0xf000f register\n", rc);
/* We leave chip type to UNKNOWN */
return;
}
/* Identify chip */
switch(val & 0xff) {
case 0xef:
chip->type = PROC_CHIP_P8_MURANO;
assert(proc_gen == proc_gen_p8);
break;
case 0xea:
chip->type = PROC_CHIP_P8_VENICE;
assert(proc_gen == proc_gen_p8);
break;
case 0xd3:
chip->type = PROC_CHIP_P8_NAPLES;
assert(proc_gen == proc_gen_p8);
break;
case 0xd1:
chip->type = PROC_CHIP_P9_NIMBUS;
assert(proc_gen == proc_gen_p9);
break;
case 0xd4:
chip->type = PROC_CHIP_P9_CUMULUS;
assert(proc_gen == proc_gen_p9);
break;
case 0xd9:
chip->type = PROC_CHIP_P9P;
assert(proc_gen == proc_gen_p9);
break;
case 0xda:
chip->type = PROC_CHIP_P10;
assert(proc_gen == proc_gen_p10);
break;
default:
printf("CHIP: Unknown chip type 0x%02x !!!\n",
(unsigned char)(val & 0xff));
}
/* Get EC level from CFAM ID */
chip->ec_level = ((val >> 16) & 0xf) << 4;
chip->ec_level |= (val >> 8) & 0xf;
/* Grab the ECID bits to differentiate DD1.01, 1.02, 2.00, etc... */
chip->ec_rev = xscom_get_ec_rev(chip);
}
/*
* This function triggers xstop by writing to XSCOM.
* Machine would enter xstop state post completion of this.
*/
int64_t xscom_trigger_xstop(void)
{
int rc = OPAL_UNSUPPORTED;
bool xstop_disabled = false;
if (nvram_query_eq_dangerous("opal-sw-xstop", "disable"))
xstop_disabled = true;
if (xstop_disabled) {
prlog(PR_NOTICE, "Software initiated checkstop disabled.\n");
return rc;
}
if (xstop_xscom.addr)
rc = xscom_writeme(xstop_xscom.addr,
PPC_BIT(xstop_xscom.fir_bit));
return rc;
}
void xscom_init(void)
{
struct dt_node *xn;
const struct dt_property *p;
dt_for_each_compatible(dt_root, xn, "ibm,xscom") {
uint32_t gcid = dt_get_chip_id(xn);
const struct dt_property *reg;
struct proc_chip *chip;
const char *chip_name;
static const char *chip_names[] = {
"UNKNOWN", "P8E", "P8", "P8NVL", "P9N", "P9C", "P9P",
"P10",
};
chip = get_chip(gcid);
assert(chip);
/* XXX We need a proper address parsing. For now, we just
* "know" that we are looking at a u64
*/
reg = dt_find_property(xn, "reg");
assert(reg);
chip->xscom_base = dt_translate_address(xn, 0, NULL);
/* Grab processor type and EC level */
xscom_init_chip_info(chip);
if (chip->type >= ARRAY_SIZE(chip_names))
chip_name = "INVALID";
else
chip_name = chip_names[chip->type];
/* We keep a "CHIP" prefix to make the log more user-friendly */
prlog(PR_NOTICE, "CHIP: Chip ID %04x type: %s DD%x.%x%d\n",
gcid, chip_name, chip->ec_level >> 4,
chip->ec_level & 0xf, chip->ec_rev);
prlog(PR_DEBUG, "XSCOM: Base address: 0x%llx\n", chip->xscom_base);
}
/* Collect details to trigger xstop via XSCOM write */
p = dt_find_property(dt_root, "ibm,sw-checkstop-fir");
if (p) {
xstop_xscom.addr = dt_property_get_cell(p, 0);
xstop_xscom.fir_bit = dt_property_get_cell(p, 1);
prlog(PR_DEBUG, "XSTOP: XSCOM addr = 0x%llx, FIR bit = %lld\n",
xstop_xscom.addr, xstop_xscom.fir_bit);
} else
prlog(PR_DEBUG, "XSTOP: ibm,sw-checkstop-fir prop not found\n");
}
void xscom_used_by_console(void)
{
xscom_lock.in_con_path = true;
/*
* Some other processor might hold it without having
* disabled the console locally so let's make sure that
* is over by taking/releasing the lock ourselves
*/
lock(&xscom_lock);
unlock(&xscom_lock);
}
bool xscom_ok(void)
{
return !lock_held_by_me(&xscom_lock);
}