| /* IBM_PROLOG_BEGIN_TAG */ |
| /* This is an automatically generated prolog. */ |
| /* */ |
| /* $Source: src/import/chips/p10/procedures/utils/stopreg/p10_stop_api.C $ */ |
| /* */ |
| /* OpenPOWER HostBoot Project */ |
| /* */ |
| /* Contributors Listed Below - COPYRIGHT 2015,2021 */ |
| /* [+] International Business Machines Corp. */ |
| /* */ |
| /* */ |
| /* Licensed under the Apache License, Version 2.0 (the "License"); */ |
| /* you may not use this file except in compliance with the License. */ |
| /* You may obtain a copy of the License at */ |
| /* */ |
| /* http://www.apache.org/licenses/LICENSE-2.0 */ |
| /* */ |
| /* Unless required by applicable law or agreed to in writing, software */ |
| /* distributed under the License is distributed on an "AS IS" BASIS, */ |
| /* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */ |
| /* implied. See the License for the specific language governing */ |
| /* permissions and limitations under the License. */ |
| /* */ |
| /* IBM_PROLOG_END_TAG */ |
| #ifndef __P10_STOP_IMAGE_API_ |
| #define __P10_STOP_IMAGE_API_ |
| |
| #include <stdint.h> |
| |
| #ifdef __SKIBOOT__ |
| #include <skiboot.h> |
| #include <p9_stop_api.H> |
| #endif |
| |
| /// |
| /// @file p10_stop_api.H |
| /// @brief describes STOP API which create/manipulate STOP image. |
| /// |
| // *HWP HW Owner : Greg Still <stillgs@us.ibm.com> |
| // *HWP FW Owner : Prem Shanker Jha <premjha2@in.ibm.com> |
| // *HWP Team : PM |
| // *HWP Level : 2 |
| // *HWP Consumed by : HB:HYP |
| |
| #ifdef __cplusplus |
| namespace stopImageSection |
| { |
| #endif |
| |
| /** |
| * @brief all SPRs and MSR for which register restore is to be supported. |
| * @note STOP API design has built in support to accomodate 8 register of |
| * scope core and thread each. |
| */ |
| typedef enum |
| { |
| PROC_STOP_SPR_DAWR = 180, // thread register |
| PROC_STOP_SPR_CIABR = 187, // thread register |
| PROC_STOP_SPR_DAWRX = 188, // thread register |
| PROC_STOP_SPR_HSPRG0 = 304, // thread register |
| PROC_STOP_SPR_HRMOR = 313, // core register |
| PROC_STOP_SPR_LPCR = 318, // thread register |
| PROC_STOP_SPR_HMEER = 337, // core register |
| PROC_STOP_SPR_PTCR = 464, // core register |
| PROC_STOP_SPR_USPRG0 = 496, // thread register |
| PROC_STOP_SPR_USPRG1 = 497, // thread register |
| PROC_STOP_SPR_URMOR = 505, // core register |
| PROC_STOP_SPR_SMFCTRL = 511, // thread register |
| PROC_STOP_SPR_LDBAR = 850, // thread register |
| PROC_STOP_SPR_PSSCR = 855, // thread register |
| PROC_STOP_SPR_PMCR = 884, // core register |
| PROC_STOP_SPR_HID = 1008, // core register |
| PROC_STOP_SPR_MSR = 2000, // thread register |
| |
| } CpuReg_p10_t; |
| |
| // /** |
| // * @brief lists all the bad error codes. |
| // */ |
| // typedef enum |
| // { |
| // STOP_SAVE_SUCCESS = 0, |
| // STOP_SAVE_ARG_INVALID_IMG = 1, |
| // STOP_SAVE_ARG_INVALID_REG = 2, |
| // STOP_SAVE_ARG_INVALID_THREAD = 3, |
| // STOP_SAVE_ARG_INVALID_MODE = 4, |
| // STOP_SAVE_ARG_INVALID_CORE = 5, |
| // STOP_SAVE_SPR_ENTRY_NOT_FOUND = 6, |
| // STOP_SAVE_SPR_ENTRY_UPDATE_FAILED = 7, |
| // STOP_SAVE_SCOM_INVALID_OPERATION = 8, |
| // STOP_SAVE_SCOM_INVALID_SECTION = 9, |
| // STOP_SAVE_SCOM_INVALID_ADDRESS = 10, |
| // STOP_SAVE_SCOM_INVALID_CHIPLET = 11, |
| // STOP_SAVE_SCOM_ENTRY_UPDATE_FAILED = 12, |
| // STOP_SAVE_INVALID_FUSED_CORE_STATUS = 13, |
| // STOP_SAVE_FAIL = 14, // for internal failure within firmware. |
| // STOP_SAVE_SPR_ENTRY_MISSING = 15, |
| // STOP_SAVE_MAX_ENTRY_REACHED = 16, |
| // STOP_SAVE_SPR_BIT_POS_RESERVE = 17, |
| // } StopReturnCode_t; |
| |
| /** |
| * @brief summarizes all operations supported on scom entries of STOP image. |
| */ |
| typedef enum |
| { |
| //enum members which are project agnostic |
| PROC_STOP_SCOM_OP_MIN = 0, |
| PROC_STOP_SCOM_APPEND = 1, |
| PROC_STOP_SCOM_REPLACE = 2, |
| PROC_STOP_SCOM_OR = 3, |
| PROC_STOP_SCOM_AND = 4, |
| PROC_STOP_SCOM_NOOP = 5, |
| PROC_STOP_SCOM_RESET = 6, |
| PROC_STOP_SCOM_OR_APPEND = 7, |
| PROC_STOP_SCOM_AND_APPEND = 8, |
| PROC_STOP_SCOM_OP_MAX = 9, |
| |
| } StopReturnCode_p10_t; |
| |
| /** |
| * @brief All subsections that contain scom entries in a STOP image. |
| */ |
| typedef enum |
| { |
| PROC_STOP_SECTION_CORE = 1, |
| PROC_STOP_SECTION_L2 = 1, |
| PROC_STOP_SECTION_L3 = 2, |
| PROC_STOP_SECTION_CACHE = 2, |
| } ScomSection_p10_t; |
| |
| /** |
| * @brief versions pertaining relvant to STOP API. |
| */ |
| typedef enum |
| { |
| STOP_API_VER = 0x00, |
| STOP_API_VER_CONTROL = 0x02, |
| } VersionList_t; |
| |
| /** |
| * @brief Summarizes bit position allocated to SPRs in save bit mask vector. |
| */ |
| typedef enum |
| { |
| BIT_POS_CIABR = 0, |
| BIT_POS_DAWR = 1, |
| BIT_POS_DAWRX = 2, |
| BIT_POS_HSPRG0 = 3, |
| BIT_POS_LDBAR = 4, |
| BIT_POS_LPCR = 5, |
| BIT_POS_PSSCR = 6, |
| BIT_POS_MSR = 7, |
| BIT_POS_HID = 21, |
| BIT_POS_HMEER = 22, |
| BIT_POS_PMCR = 23, |
| BIT_POS_PTCR = 24, |
| BIT_POS_SMFCTRL = 28, |
| BIT_POS_USPRG0 = 29, |
| BIT_POS_USPRG1 = 30, |
| } SprBitPositionList_t; |
| |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| /** |
| * @brief creates SCOM restore entry for a given scom adress in HOMER. |
| * @param i_pImage points to start address of HOMER image. |
| * @param i_scomAddress address associated with SCOM restore entry. |
| * @param i_scomData data associated with SCOM restore entry. |
| * @param i_operation operation type requested for API. |
| * @param i_section section of HOMER in which restore entry needs to be created. |
| * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise. |
| * @note It is an API for creating SCOM restore entry in HOMER. It is agnostic to |
| * generation of POWER processor. |
| */ |
| |
| StopReturnCode_t proc_stop_save_scom( void* const i_pImage, |
| const uint32_t i_scomAddress, |
| const uint64_t i_scomData, |
| const StopReturnCode_p10_t i_operation, |
| const ScomSection_p10_t i_section ); |
| |
| /** |
| * @brief initializes self save restore region of HOMER. |
| * @param[in] i_pImage points to base of HOMER image. |
| * @param[in] i_corePos position of the physical core. |
| * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise. |
| * @note It is an API for initializing self restore region in HOMER. It is agnostic to |
| * generation of POWER processor. |
| */ |
| StopReturnCode_t proc_stop_init_cpureg( void* const i_pImage, const uint32_t i_corePos ); |
| |
| /** |
| * @brief enables self save for a given set of SPRs |
| * @param[in] i_pImage points to start address of HOMER image. |
| * @param[in] i_pir PIR value associated with core and thread. |
| * @param[in] i_saveRegVector bit vector representing the SPRs that needs to be self saved. |
| * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise. |
| * @note It is an API for enabling self save of SPRs and it is agnostic to |
| * generation of POWER processor. |
| */ |
| StopReturnCode_t proc_stop_save_cpureg_control( void* i_pImage, |
| const uint64_t i_pir, |
| const uint32_t i_saveRegVector ); |
| |
| /** |
| * @brief creates an SPR restore entry in HOMER |
| * @param[in] i_pImage points to start address of HOMER image. |
| * @param[in] i_regId SPR number to be saved in HOMER |
| * @param[in] i_regData SPR data to be saved in HOMER |
| * @param[in] i_pir PIR value associated with core and thread. |
| * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise. |
| * @note It is an API for enabling self save of SPRs and it is agnostic to |
| * generation of POWER processor. |
| */ |
| StopReturnCode_t proc_stop_save_cpureg( void* const i_pImage, |
| const CpuReg_p10_t i_regId, |
| const uint64_t i_regData, |
| const uint64_t i_pir ); |
| |
| /** |
| * @brief initializes self-save region with specific instruction. |
| * @param[in] i_pImage points to start address of HOMER image. |
| * @param[in] i_corePos physical core's relative position within processor chip. |
| * @return STOP_SAVE_SUCCESS if self-save is initialized successfully, |
| * error code otherwise. |
| * @note API is project agnostic and is intended only for use case of HOMER build. |
| * There is no explicit effort to support any other use case. |
| */ |
| StopReturnCode_t proc_stop_init_self_save( void* const i_pImage, const uint32_t i_corePos ); |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| }; // namespace stopImageSection ends |
| #endif //__cplusplus |
| |
| #endif //__P10_STOP_IMAGE_API_ |
