| #!/bin/bash |
| # |
| |
| ################################################################################# |
| # # |
| # TPM2 regression test # |
| # Written by Ken Goldman # |
| # IBM Thomas J. Watson Research Center # |
| # # |
| # (c) Copyright IBM Corporation 2015 - 2020 # |
| # # |
| # All rights reserved. # |
| # # |
| # Redistribution and use in source and binary forms, with or without # |
| # modification, are permitted provided that the following conditions are # |
| # met: # |
| # # |
| # Redistributions of source code must retain the above copyright notice, # |
| # this list of conditions and the following disclaimer. # |
| # # |
| # Redistributions in binary form must reproduce the above copyright # |
| # notice, this list of conditions and the following disclaimer in the # |
| # documentation and/or other materials provided with the distribution. # |
| # # |
| # Neither the names of the IBM Corporation nor the names of its # |
| # contributors may be used to endorse or promote products derived from # |
| # this software without specific prior written permission. # |
| # # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # |
| # HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # |
| # # |
| ################################################################################# |
| |
| # Primary storage key at 80000000 password sto |
| # storage key at 80000001 password sto |
| |
| echo "" |
| echo "RSA Storage key" |
| echo "" |
| |
| echo "Load the RSA storage key 80000001 under the primary key 80000000" |
| ${PREFIX}load -hp 80000000 -ipr storersa2048priv.bin -ipu storersa2048pub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Start an HMAC auth session" |
| ${PREFIX}startauthsession -se h > run.out |
| checkSuccess $? |
| |
| for NALG in ${ITERATE_ALGS} |
| do |
| |
| for SESS in "" "-se0 02000000 1" |
| do |
| |
| echo "Create an unrestricted signing key under the RSA storage key 80000001 ${NALG} ${SESS}" |
| ${PREFIX}create -hp 80000001 -si -kt f -kt p -opr tmppriv.bin -opu tmppub.bin -pwdp sto -pwdk 111 -nalg ${NALG} ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Load the signing key 80000002 under the storage key 80000001 ${SESS}" |
| ${PREFIX}load -hp 80000001 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Read the signing key 80000002 public area" |
| ${PREFIX}readpublic -ho 80000002 -opu tmppub2.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key 80000002" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| |
| echo "Load external just the storage key public part 80000002 ${NALG}" |
| ${PREFIX}loadexternal -halg sha256 -nalg ${NALG} -ipu storersa2048pub.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the public key 80000002" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| |
| echo "Load external, signing key public part 80000002 ${NALG}" |
| ${PREFIX}loadexternal -halg sha256 -nalg ${NALG} -ipu tmppub2.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the public key 80000002" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| done |
| done |
| |
| echo "Flush the RSA storage key 80000001" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "ECC Storage key" |
| echo "" |
| |
| echo "Load ECC the storage key 80000001 under the primary key 80000000" |
| ${PREFIX}load -hp 80000000 -ipr storeeccpriv.bin -ipu storeeccpub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| for NALG in ${ITERATE_ALGS} |
| do |
| |
| for SESS in "" "-se0 02000000 1" |
| do |
| |
| echo "Create an unrestricted signing key under the ECC storage key 80000001 ${NALG} ${SESS}" |
| ${PREFIX}create -hp 80000001 -si -kt f -kt p -ecc nistp256 -opr tmppriv.bin -opu tmppub.bin -pwdp sto -pwdk 111 -nalg ${NALG} ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Load the ECC signing key 80000002 under the ECC storage key 80000001 ${SESS}" |
| ${PREFIX}load -hp 80000001 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto ${SESS}> run.out |
| checkSuccess $? |
| |
| echo "Read the signing key 80000002 public area" |
| ${PREFIX}readpublic -ho 80000002 -opu tmppub2.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key 80000002" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| |
| echo "Load external, storage key public part 80000002 ${NALG}" |
| ${PREFIX}loadexternal -halg sha256 -nalg ${NALG} -ipu storeeccpub.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the public key 80000002" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| |
| echo "Load external, signing key public part 80000002 ${NALG}" |
| ${PREFIX}loadexternal -halg sha256 -nalg ${NALG} -ipu tmppub2.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key 80000002" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| done |
| done |
| |
| echo "Flush the ECC storage key 80000001 " |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the auth session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| rm -f tmppub2.bin |
| rm -f tmppub.bin |
| rm -f tmppriv.bin |
| rm -f tmpsig.bin |
| |
| # ${PREFIX}getcapability -cap 1 -pr 80000000 |
| # ${PREFIX}getcapability -cap 1 -pr 02000000 |