| REM ############################################################################# |
| REM # # |
| REM # TPM2 regression test # |
| REM # Written by Ken Goldman # |
| REM # IBM Thomas J. Watson Research Center # |
| REM # # |
| REM # (c) Copyright IBM Corporation 2015 - 2020 # |
| REM # # |
| REM # All rights reserved. # |
| REM # # |
| REM # Redistribution and use in source and binary forms, with or without # |
| REM # modification, are permitted provided that the following conditions are # |
| REM # met: # |
| REM # # |
| REM # Redistributions of source code must retain the above copyright notice, # |
| REM # this list of conditions and the following disclaimer. # |
| REM # # |
| REM # Redistributions in binary form must reproduce the above copyright # |
| REM # notice, this list of conditions and the following disclaimer in the # |
| REM # documentation and/or other materials provided with the distribution. # |
| REM # # |
| REM # Neither the names of the IBM Corporation nor the names of its # |
| REM # contributors may be used to endorse or promote products derived from # |
| REM # this software without specific prior written permission. # |
| REM # # |
| REM # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # |
| REM # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # |
| REM # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # |
| REM # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # |
| REM # HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # |
| REM # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # |
| REM # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # |
| REM # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # |
| REM # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # |
| REM # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # |
| REM # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # |
| REM # # |
| REM ############################################################################# |
| |
| setlocal enableDelayedExpansion |
| |
| for %%B in (2048 3072) do ( |
| |
| echo "generate the %%B encryption key with openssl" |
| openssl genrsa -out tmpkeypairrsa%%B.pem -aes256 -passout pass:rrrr 2048 |
| |
| echo "Convert key pair to plaintext DER format" |
| openssl rsa -inform pem -outform der -in tmpkeypairrsa%%B.pem -out tmpkeypairrsa%%B.der -passin pass:rrrr > run.out |
| ) |
| |
| echo "" |
| echo "RSA decryption key" |
| echo "" |
| |
| for %%B in (2048 3072) do ( |
| |
| echo "Load the RSA %%B decryption key under the primary key" |
| %TPM_EXE_PATH%load -hp 80000000 -ipr derrsa%%Bpriv.bin -ipu derrsa%%Bpub.bin -pwdp sto > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA encrypt with the %%B encryption key" |
| %TPM_EXE_PATH%rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA decrypt with the %%B decryption key" |
| %TPM_EXE_PATH%rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin -pwdk dec > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Verify the decrypt result" |
| tail --bytes=3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Flush the %%B decryption key" |
| %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| ) |
| |
| echo "" |
| echo "RSA decryption key to sign with OID" |
| echo "" |
| |
| for %%B in (2048 3072) do ( |
| |
| echo "Load the RSA %%B decryption key" |
| %TPM_EXE_PATH%load -hp 80000000 -ipu derrsa%%Bpub.bin -ipr derrsa%%Bpriv.bin -pwdp sto > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| set HSIZ=20 32 48 64 |
| set HALG=%ITERATE_ALGS% |
| |
| set i=0 |
| for %%a in (!HSIZ!) do set /A i+=1 & set HSIZ[!i!]=%%a |
| set i=0 |
| for %%b in (!HALG!) do set /A i+=1 & set HALG[!i!]=%%b |
| set L=!i! |
| |
| for /L %%i in (1,1,!L!) do ( |
| |
| echo "Decrypt/Sign with a caller specified OID - !HALG[%%i]!" |
| %TPM_EXE_PATH%rsadecrypt -hk 80000001 -pwdk dec -ie policies/!HALG[%%i]!aaa.bin -od tmpsig.bin -oid !HALG[%%i]! > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Encrypt/Verify - !HALG[%%i]!" |
| %TPM_EXE_PATH%rsaencrypt -hk 80000001 -id tmpsig.bin -oe tmpmsg.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Verify Result - !HALG[%%i]! !HSIZ[%%i]! bytes" |
| tail --bytes=!HSIZ[%%i]! tmpmsg.bin > tmpdig.bin |
| diff tmpdig.bin policies/!HALG[%%i]!aaa.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| ) |
| |
| echo "Flush the RSA %%B signing key" |
| %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| ) |
| |
| echo "" |
| echo "Import PEM RSA encryption key" |
| echo "" |
| |
| echo "Start an HMAC auth session" |
| %TPM_EXE_PATH%startauthsession -se h > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| for %%B in (2048 3072) do ( |
| |
| for %%S in ("" "-se0 02000000 1") do ( |
| |
| echo "Import the %%B encryption key under the primary key" |
| %TPM_EXE_PATH%importpem -hp 80000000 -den -pwdp sto -ipem tmpkeypairrsa%%B.pem -pwdk rrrr -opu tmppub.bin -opr tmppriv.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Load the TPM encryption key" |
| %TPM_EXE_PATH%load -hp 80000000 -pwdp sto -ipu tmppub.bin -ipr tmppriv.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Sign the message %%~S - should fail" |
| %TPM_EXE_PATH%sign -hk 80000001 -pwdk rrrr -if policies/aaa -os tmpsig.bin %%~S > run.out |
| IF !ERRORLEVEL! EQU 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA encrypt with the encryption key" |
| %TPM_EXE_PATH%rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA decrypt with the decryption key %%~S" |
| %TPM_EXE_PATH%rsadecrypt -hk 80000001 -pwdk rrrr -ie enc.bin -od dec.bin %%~S > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Verify the decrypt result" |
| tail --bytes=3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Flush the encryption key" |
| %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| ) |
| ) |
| |
| echo "Flush the session" |
| %TPM_EXE_PATH%flushcontext -ha 02000000 > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "" |
| echo "Loadexternal DER encryption key" |
| echo "" |
| |
| for %%B in (2048 3072) do ( |
| |
| echo "Start an HMAC auth session" |
| %TPM_EXE_PATH%startauthsession -se h > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| for %%S in ("" "-se0 02000000 1") do ( |
| |
| echo "Load the openssl key pair in the NULL hierarchy 80000001" |
| %TPM_EXE_PATH%loadexternal -den -ider tmpkeypairrsa%%B.der -pwdk rrrr > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA encrypt with the encryption key" |
| %TPM_EXE_PATH%rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA decrypt with the decryption key %%~S" |
| %TPM_EXE_PATH%rsadecrypt -hk 80000001 -pwdk rrrr -ie enc.bin -od dec.bin %%~S > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Verify the decrypt result" |
| tail --bytes=3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Flush the encryption key" |
| %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| ) |
| |
| echo "Flush the session" |
| %TPM_EXE_PATH%flushcontext -ha 02000000 > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| ) |
| |
| echo "" |
| echo "Encrypt with OpenSSL OAEP, decrypt with TPM" |
| echo "" |
| |
| echo "Create OAEP encryption key" |
| %TPM_EXE_PATH%create -hp 80000000 -pwdp sto -deo -kt f -kt p -halg sha1 -opr tmpprivkey.bin -opu tmppubkey.bin -opem tmppubkey.pem > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Load encryption key at 80000001" |
| %TPM_EXE_PATH%load -hp 80000000 -pwdp sto -ipr tmpprivkey.bin -ipu tmppubkey.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Encrypt using OpenSSL and the PEM public key" |
| openssl rsautl -oaep -encrypt -inkey tmppubkey.pem -pubin -in policies/aaa -out enc.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Decrypt using TPM key at 80000001" |
| %TPM_EXE_PATH%rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Verify the decrypt result" |
| diff policies/aaa dec.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Flush the encryption key" |
| %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "" |
| echo "Child RSA decryption key RSAES" |
| echo "" |
| |
| echo "Create RSAES encryption key" |
| %TPM_EXE_PATH%create -hp 80000000 -pwdp sto -dee -opr deepriv.bin -opu deepub.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Load encryption key at 80000001" |
| %TPM_EXE_PATH%load -hp 80000000 -pwdp sto -ipr deepriv.bin -ipu deepub.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA encrypt with the encryption key" |
| %TPM_EXE_PATH%rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA decrypt with the decryption key" |
| %TPM_EXE_PATH%rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Verify the decrypt result" |
| tail --bytes=3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Flush the encryption key" |
| %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "" |
| echo "Primary RSA decryption key RSAES" |
| echo "" |
| |
| echo "Create Primary RSAES encryption key" |
| %TPM_EXE_PATH%createprimary -hi p -dee -halg sha256 -opem tmppubkey.pem > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA encrypt with the encryption key" |
| %TPM_EXE_PATH%rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA decrypt with the decryption key" |
| %TPM_EXE_PATH%rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Verify the decrypt result" |
| tail --bytes=3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Flush the encryption key" |
| %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "" |
| echo "Primary Create Loaded RSA decryption key RSAES" |
| echo "" |
| |
| echo "CreateLoaded primary key, storage parent 80000001" |
| %TPM_EXE_PATH%createloaded -hp 40000001 -dee > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA encrypt with the encryption key" |
| %TPM_EXE_PATH%rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "RSA decrypt with the decryption key" |
| %TPM_EXE_PATH%rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| echo "Verify the decrypt result" |
| tail --bytes=3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| echo "Flush the encryption key" |
| %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out |
| IF !ERRORLEVEL! NEQ 0 ( |
| exit /B 1 |
| ) |
| |
| REM cleanup |
| |
| rm -f tmp.bin |
| rm -f enc.bin |
| rm -f dec.bin |
| rm -f deepub.bin |
| rm -f deepriv.bin |
| rm -f tmpmsg.bin |
| rm -f tmpdig.bin |
| rm -f tmpsig.bin |
| rm -f tmpkeypairrsa2048.der |
| rm -f tmpkeypairrsa2048.pem |
| rm -f tmpkeypairrsa3072.der |
| rm -f tmpkeypairrsa3072.pem |
| rm -f tmppubkey.bin |
| rm -f tmppubkey.pem |
| rm -f tmpprivkey.bin |
| |
| exit /B 0 |
| |
| REM getcapability -cap 1 -pr 80000000 |
| REM getcapability -cap 1 -pr 02000000 |
| REM |
| REM flushcontext -ha 80000001 |
| |