| #!/bin/bash |
| # |
| |
| ################################################################################# |
| # # |
| # TPM2 regression test # |
| # Written by Ken Goldman # |
| # IBM Thomas J. Watson Research Center # |
| # # |
| # (c) Copyright IBM Corporation 2015 - 2020 # |
| # # |
| # All rights reserved. # |
| # # |
| # Redistribution and use in source and binary forms, with or without # |
| # modification, are permitted provided that the following conditions are # |
| # met: # |
| # # |
| # Redistributions of source code must retain the above copyright notice, # |
| # this list of conditions and the following disclaimer. # |
| # # |
| # Redistributions in binary form must reproduce the above copyright # |
| # notice, this list of conditions and the following disclaimer in the # |
| # documentation and/or other materials provided with the distribution. # |
| # # |
| # Neither the names of the IBM Corporation nor the names of its # |
| # contributors may be used to endorse or promote products derived from # |
| # this software without specific prior written permission. # |
| # # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # |
| # HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # |
| # # |
| ################################################################################# |
| |
| TWOAUTH0=(01 01 01 01 21 21 41 41 61) |
| TWOAUTH1=(01 21 41 61 01 41 01 21 01) |
| |
| THREEAUTH0=(01 01 01 01 01 21 41) |
| THREEAUTH1=(01 01 01 21 41 01 01) |
| THREEAUTH2=(21 41 61 41 21 41 21) |
| |
| echo "" |
| echo "Parameter Encryption - Basic" |
| echo "" |
| |
| echo "Load the signing key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr signrsa2048priv.bin -ipu signrsa2048pub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| for MODE0 in xor aes |
| do |
| |
| for MODE1 in xor aes |
| do |
| |
| for MODE2 in xor aes |
| do |
| |
| echo "Start an HMAC auth session with $MODE0 encryption" |
| ${PREFIX}startauthsession -se h -sym $MODE0 > run.out |
| checkSuccess $? |
| |
| echo "Start an HMAC auth session with $MODE1 encryption" |
| ${PREFIX}startauthsession -se h -sym $MODE1 > run.out |
| checkSuccess $? |
| |
| echo "Start an HMAC auth session with $MODE2 encryption" |
| ${PREFIX}startauthsession -se h -sym $MODE2 > run.out |
| checkSuccess $? |
| |
| # one auth |
| |
| for AUTH0 in 21 41 61 |
| do |
| |
| echo "Signing Key Self Certify, one auth $AUTH0" |
| ${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 $AUTH0 > run.out |
| checkSuccess $? |
| |
| done |
| |
| # two auth |
| |
| for ((i = 0 ; i < 9; i++)) |
| do |
| |
| echo "Signing Key Self Certify, two auth ${TWOAUTH0[i]} ${TWOAUTH1[i]}" |
| ${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${TWOAUTH0[i]} -se1 02000001 ${TWOAUTH1[i]} > run.out |
| checkSuccess $? |
| |
| done |
| |
| # three auth |
| |
| for ((i = 0 ; i < 7; i++)) |
| do |
| |
| echo "Signing Key Self Certify, three auth ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}" |
| ${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 02000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000002 > run.out |
| checkSuccess $? |
| done |
| done |
| done |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Create a signing key, policy command code certify" |
| ${PREFIX}create -hp 80000000 -si -kt f -kt p -opr tmppriv.bin -opu tmppub.bin -pwdp sto -pwdk sig -pol policies/policycccertify.bin > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Salt encrypt and decrypt HMAC sessions" |
| echo "" |
| |
| echo "Load the signing key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr signrsa2048priv.bin -ipu signrsa2048pub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Start an auth session" |
| ${PREFIX}startauthsession -se h -hs 80000000 > run.out |
| checkSuccess $? |
| |
| echo "Start an auth session" |
| ${PREFIX}startauthsession -se h -hs 80000000 > run.out |
| checkSuccess $? |
| |
| echo "Start an encrypt session" |
| ${PREFIX}startauthsession -se h -hs 80000000 > run.out |
| checkSuccess $? |
| |
| for ((i = 0 ; i < 7 ; i++)) |
| do |
| |
| echo "Signing Key Self Certify, three auth, salted parameter encryption ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}" |
| ${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 02000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000002 > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Bind encrypt and decrypt HMAC sessions" |
| echo "" |
| |
| echo "Load the signing key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr signrsa2048priv.bin -ipu signrsa2048pub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Start an auth session" |
| ${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out |
| checkSuccess $? |
| |
| echo "Start an auth session" |
| ${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out |
| checkSuccess $? |
| |
| echo "Start an encrypt session" |
| ${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out |
| checkSuccess $? |
| |
| for ((i = 0 ; i < 7 ; i++)) |
| do |
| |
| echo "Signing Key Self Certify, three auth, bind parameter encryption ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}" |
| ${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 02000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000002 > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| |
| # policycccertify.txt 0000016c00000148 |
| # policymaker -if policies/policycccertify.txt -of policies/policycccertify.bin -v -pr |
| # 04 8e 9a 3a ce 08 58 3f 79 f3 44 ff 78 5b be a9 |
| # f0 7a c7 fa 33 25 b3 d4 9a 21 dd 51 94 c6 58 50 |
| |
| echo "" |
| echo "Salt encrypt and decrypt policy sessions" |
| echo "" |
| |
| echo "Load the signing key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Start an auth session" |
| ${PREFIX}startauthsession -se h -hs 80000000 > run.out |
| checkSuccess $? |
| |
| echo "Start a policy session" |
| ${PREFIX}startauthsession -se p -hs 80000000 > run.out |
| checkSuccess $? |
| |
| echo "Start an encrypt session" |
| ${PREFIX}startauthsession -se h -hs 80000000 > run.out |
| checkSuccess $? |
| |
| for ((i = 0 ; i < 7 ; i++)) |
| do |
| |
| echo "Policy restart" |
| ${PREFIX}policyrestart -ha 03000001 > run.out |
| checkSuccess $? |
| |
| echo "Policy command code - certify" |
| ${PREFIX}policycommandcode -ha 03000001 -cc 148 > run.out |
| checkSuccess $? |
| |
| echo "Signing Key Self Certify, three auth, salted parameter encryption ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}" |
| ${PREFIX}certify -hk 80000001 -ho 80000001 -pwdo sig -pwdk sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 03000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 03000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000002 > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Bind encrypt and decrypt policy sessions" |
| echo "" |
| |
| echo "Load the signing key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Start an auth session" |
| ${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out |
| checkSuccess $? |
| |
| echo "Start a policy session" |
| ${PREFIX}startauthsession -se p -bi 80000001 -pwdb sig > run.out |
| checkSuccess $? |
| |
| echo "Start an encrypt session" |
| ${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out |
| checkSuccess $? |
| |
| for ((i = 0 ; i < 7 ; i++)) |
| do |
| |
| echo "Policy restart" |
| ${PREFIX}policyrestart -ha 03000001 > run.out |
| checkSuccess $? |
| |
| echo "Policy command code - certify" |
| ${PREFIX}policycommandcode -ha 03000001 -cc 148 > run.out |
| checkSuccess $? |
| |
| echo "Signing Key Self Certify, three auth, bind parameter encryption ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}" |
| ${PREFIX}certify -hk 80000001 -ho 80000001 -pwdo sig -pwdk xxx -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 03000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 03000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sessions" |
| ${PREFIX}flushcontext -ha 02000002 > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| |
| |
| # getcapability -cap 1 -pr 80000000 |
| # getcapability -cap 1 -pr 02000000 |