| #!/bin/bash |
| # |
| |
| ################################################################################# |
| # # |
| # TPM2 regression test # |
| # Written by Ken Goldman # |
| # IBM Thomas J. Watson Research Center # |
| # # |
| # (c) Copyright IBM Corporation 2015 - 2020 # |
| # # |
| # All rights reserved. # |
| # # |
| # Redistribution and use in source and binary forms, with or without # |
| # modification, are permitted provided that the following conditions are # |
| # met: # |
| # # |
| # Redistributions of source code must retain the above copyright notice, # |
| # this list of conditions and the following disclaimer. # |
| # # |
| # Redistributions in binary form must reproduce the above copyright # |
| # notice, this list of conditions and the following disclaimer in the # |
| # documentation and/or other materials provided with the distribution. # |
| # # |
| # Neither the names of the IBM Corporation nor the names of its # |
| # contributors may be used to endorse or promote products derived from # |
| # this software without specific prior written permission. # |
| # # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # |
| # HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # |
| # # |
| ################################################################################# |
| |
| echo "" |
| echo "Context" |
| echo "" |
| |
| echo "" |
| echo "Basic Context" |
| echo "" |
| |
| echo "Start an HMAC auth session" |
| ${PREFIX}startauthsession -se h > run.out |
| checkSuccess $? |
| |
| echo "Load the signing key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr signrsa2048priv.bin -ipu signrsa2048pub.bin -pwdp sto -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "Sign a digest" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -os sig.bin -pwdk sig -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "Verify the signature" |
| ${PREFIX}verifysignature -hk 80000001 -halg sha256 -if msg.bin -is sig.bin > run.out |
| checkSuccess $? |
| |
| echo "Save context for the key" |
| ${PREFIX}contextsave -ha 80000001 -of tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Sign to verify that the original key is not flushed" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -os sig.bin -pwdk sig -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "Flush the original key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Sign with original key - should fail" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -os sig.bin -pwdk sig -se0 02000000 1 > run.out |
| checkFailure $? |
| |
| echo "Load context" |
| ${PREFIX}contextload -if tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Sign with the loaded context" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -os sig.bin -pwdk sig -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "Save context for the session" |
| ${PREFIX}contextsave -ha 02000000 -of tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Sign with the saved session context - should fail" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -os sig.bin -pwdk sig -se0 02000000 1 > run.out |
| checkFailure $? |
| |
| echo "Load context for the session" |
| ${PREFIX}contextload -if tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Sign with the saved session context" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -os sig.bin -pwdk sig -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "Flush the loaded context" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Context Public Key for Salt" |
| echo "" |
| |
| echo "Load the storage key at 80000001" |
| ${PREFIX}load -hp 80000000 -ipr storersa2048priv.bin -ipu storersa2048pub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Save context for the storage key at 80000001" |
| ${PREFIX}contextsave -ha 80000001 -of tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Load context at 80000002" |
| ${PREFIX}contextload -if tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the original key at 80000001" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Start an HMAC auth session at 02000000 using the storage key 80000002 salt" |
| ${PREFIX}startauthsession -se h -hs 80000002 > run.out |
| checkSuccess $? |
| |
| echo "Load the signing key under the primary key at 80000001" |
| ${PREFIX}load -hp 80000000 -ipr signrsa2048priv.bin -ipu signrsa2048pub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Sign a digest" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -os sig.bin -pwdk sig -se0 02000000 0 > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key at 80000001" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the salt key at 80000002" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Context Primary Key" |
| echo "" |
| |
| echo "Save context for the primary key at 80000000" |
| ${PREFIX}contextsave -ha 80000000 -of tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Load context primary key at 80000001" |
| ${PREFIX}contextload -if tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Load the signing key at 80000002 under the primary key at 80000001" |
| ${PREFIX}load -hp 80000000 -ipr signrsa2048priv.bin -ipu signrsa2048pub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key at 80000002" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| |
| echo "Flush the primary key at 80000001" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| |
| |
| # ${PREFIX}getcapability -cap 1 -pr 80000000 |
| # ${PREFIX}getcapability -cap 1 -pr 02000000 |