blob: 2bcf03a45e455fa482672e92289b07ae2b17e447 [file] [log] [blame]
/* IBM_PROLOG_BEGIN_TAG */
/* This is an automatically generated prolog. */
/* */
/* $Source: src/import/chips/p10/procedures/utils/stopreg/p10_stop_api.C $ */
/* */
/* OpenPOWER HostBoot Project */
/* */
/* Contributors Listed Below - COPYRIGHT 2015,2021 */
/* [+] International Business Machines Corp. */
/* */
/* */
/* Licensed under the Apache License, Version 2.0 (the "License"); */
/* you may not use this file except in compliance with the License. */
/* You may obtain a copy of the License at */
/* */
/* http://www.apache.org/licenses/LICENSE-2.0 */
/* */
/* Unless required by applicable law or agreed to in writing, software */
/* distributed under the License is distributed on an "AS IS" BASIS, */
/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */
/* implied. See the License for the specific language governing */
/* permissions and limitations under the License. */
/* */
/* IBM_PROLOG_END_TAG */
#ifndef __P10_STOP_IMAGE_API_
#define __P10_STOP_IMAGE_API_
#include <stdint.h>
#ifdef __SKIBOOT__
#include <skiboot.h>
#include <p9_stop_api.H>
#endif
///
/// @file p10_stop_api.H
/// @brief describes STOP API which create/manipulate STOP image.
///
// *HWP HW Owner : Greg Still <stillgs@us.ibm.com>
// *HWP FW Owner : Prem Shanker Jha <premjha2@in.ibm.com>
// *HWP Team : PM
// *HWP Level : 2
// *HWP Consumed by : HB:HYP
#ifdef __cplusplus
namespace stopImageSection
{
#endif
/**
* @brief all SPRs and MSR for which register restore is to be supported.
* @note STOP API design has built in support to accomodate 8 register of
* scope core and thread each.
*/
typedef enum
{
PROC_STOP_SPR_DAWR = 180, // thread register
PROC_STOP_SPR_CIABR = 187, // thread register
PROC_STOP_SPR_DAWRX = 188, // thread register
PROC_STOP_SPR_HSPRG0 = 304, // thread register
PROC_STOP_SPR_HRMOR = 313, // core register
PROC_STOP_SPR_LPCR = 318, // thread register
PROC_STOP_SPR_HMEER = 337, // core register
PROC_STOP_SPR_PTCR = 464, // core register
PROC_STOP_SPR_USPRG0 = 496, // thread register
PROC_STOP_SPR_USPRG1 = 497, // thread register
PROC_STOP_SPR_URMOR = 505, // core register
PROC_STOP_SPR_SMFCTRL = 511, // thread register
PROC_STOP_SPR_LDBAR = 850, // thread register
PROC_STOP_SPR_PSSCR = 855, // thread register
PROC_STOP_SPR_PMCR = 884, // core register
PROC_STOP_SPR_HID = 1008, // core register
PROC_STOP_SPR_MSR = 2000, // thread register
} CpuReg_p10_t;
// /**
// * @brief lists all the bad error codes.
// */
// typedef enum
// {
// STOP_SAVE_SUCCESS = 0,
// STOP_SAVE_ARG_INVALID_IMG = 1,
// STOP_SAVE_ARG_INVALID_REG = 2,
// STOP_SAVE_ARG_INVALID_THREAD = 3,
// STOP_SAVE_ARG_INVALID_MODE = 4,
// STOP_SAVE_ARG_INVALID_CORE = 5,
// STOP_SAVE_SPR_ENTRY_NOT_FOUND = 6,
// STOP_SAVE_SPR_ENTRY_UPDATE_FAILED = 7,
// STOP_SAVE_SCOM_INVALID_OPERATION = 8,
// STOP_SAVE_SCOM_INVALID_SECTION = 9,
// STOP_SAVE_SCOM_INVALID_ADDRESS = 10,
// STOP_SAVE_SCOM_INVALID_CHIPLET = 11,
// STOP_SAVE_SCOM_ENTRY_UPDATE_FAILED = 12,
// STOP_SAVE_INVALID_FUSED_CORE_STATUS = 13,
// STOP_SAVE_FAIL = 14, // for internal failure within firmware.
// STOP_SAVE_SPR_ENTRY_MISSING = 15,
// STOP_SAVE_MAX_ENTRY_REACHED = 16,
// STOP_SAVE_SPR_BIT_POS_RESERVE = 17,
// } StopReturnCode_t;
/**
* @brief summarizes all operations supported on scom entries of STOP image.
*/
typedef enum
{
//enum members which are project agnostic
PROC_STOP_SCOM_OP_MIN = 0,
PROC_STOP_SCOM_APPEND = 1,
PROC_STOP_SCOM_REPLACE = 2,
PROC_STOP_SCOM_OR = 3,
PROC_STOP_SCOM_AND = 4,
PROC_STOP_SCOM_NOOP = 5,
PROC_STOP_SCOM_RESET = 6,
PROC_STOP_SCOM_OR_APPEND = 7,
PROC_STOP_SCOM_AND_APPEND = 8,
PROC_STOP_SCOM_OP_MAX = 9,
} StopReturnCode_p10_t;
/**
* @brief All subsections that contain scom entries in a STOP image.
*/
typedef enum
{
PROC_STOP_SECTION_CORE = 1,
PROC_STOP_SECTION_L2 = 1,
PROC_STOP_SECTION_L3 = 2,
PROC_STOP_SECTION_CACHE = 2,
} ScomSection_p10_t;
/**
* @brief versions pertaining relvant to STOP API.
*/
typedef enum
{
STOP_API_VER = 0x00,
STOP_API_VER_CONTROL = 0x02,
} VersionList_t;
/**
* @brief Summarizes bit position allocated to SPRs in save bit mask vector.
*/
typedef enum
{
BIT_POS_CIABR = 0,
BIT_POS_DAWR = 1,
BIT_POS_DAWRX = 2,
BIT_POS_HSPRG0 = 3,
BIT_POS_LDBAR = 4,
BIT_POS_LPCR = 5,
BIT_POS_PSSCR = 6,
BIT_POS_MSR = 7,
BIT_POS_HID = 21,
BIT_POS_HMEER = 22,
BIT_POS_PMCR = 23,
BIT_POS_PTCR = 24,
BIT_POS_SMFCTRL = 28,
BIT_POS_USPRG0 = 29,
BIT_POS_USPRG1 = 30,
} SprBitPositionList_t;
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief creates SCOM restore entry for a given scom adress in HOMER.
* @param i_pImage points to start address of HOMER image.
* @param i_scomAddress address associated with SCOM restore entry.
* @param i_scomData data associated with SCOM restore entry.
* @param i_operation operation type requested for API.
* @param i_section section of HOMER in which restore entry needs to be created.
* @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise.
* @note It is an API for creating SCOM restore entry in HOMER. It is agnostic to
* generation of POWER processor.
*/
StopReturnCode_t proc_stop_save_scom( void* const i_pImage,
const uint32_t i_scomAddress,
const uint64_t i_scomData,
const StopReturnCode_p10_t i_operation,
const ScomSection_p10_t i_section );
/**
* @brief initializes self save restore region of HOMER.
* @param[in] i_pImage points to base of HOMER image.
* @param[in] i_corePos position of the physical core.
* @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise.
* @note It is an API for initializing self restore region in HOMER. It is agnostic to
* generation of POWER processor.
*/
StopReturnCode_t proc_stop_init_cpureg( void* const i_pImage, const uint32_t i_corePos );
/**
* @brief enables self save for a given set of SPRs
* @param[in] i_pImage points to start address of HOMER image.
* @param[in] i_pir PIR value associated with core and thread.
* @param[in] i_saveRegVector bit vector representing the SPRs that needs to be self saved.
* @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise.
* @note It is an API for enabling self save of SPRs and it is agnostic to
* generation of POWER processor.
*/
StopReturnCode_t proc_stop_save_cpureg_control( void* i_pImage,
const uint64_t i_pir,
const uint32_t i_saveRegVector );
/**
* @brief creates an SPR restore entry in HOMER
* @param[in] i_pImage points to start address of HOMER image.
* @param[in] i_regId SPR number to be saved in HOMER
* @param[in] i_regData SPR data to be saved in HOMER
* @param[in] i_pir PIR value associated with core and thread.
* @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise.
* @note It is an API for enabling self save of SPRs and it is agnostic to
* generation of POWER processor.
*/
StopReturnCode_t proc_stop_save_cpureg( void* const i_pImage,
const CpuReg_p10_t i_regId,
const uint64_t i_regData,
const uint64_t i_pir );
/**
* @brief initializes self-save region with specific instruction.
* @param[in] i_pImage points to start address of HOMER image.
* @param[in] i_corePos physical core's relative position within processor chip.
* @return STOP_SAVE_SUCCESS if self-save is initialized successfully,
* error code otherwise.
* @note API is project agnostic and is intended only for use case of HOMER build.
* There is no explicit effort to support any other use case.
*/
StopReturnCode_t proc_stop_init_self_save( void* const i_pImage, const uint32_t i_corePos );
#ifdef __cplusplus
} // extern "C"
}; // namespace stopImageSection ends
#endif //__cplusplus
#endif //__P10_STOP_IMAGE_API_