Google Git
Sign in
qemu / skiboot / c0ca76256aaad7b95ad052c2d22191f7eac7373c / . / hw / npu2-opencapi.c
blob: 035c6cdc3727a551d912761ef2f66526b3a66049 [file] [log] [blame]
// SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
/*
* Support for OpenCAPI on POWER9 NPUs
*
* This file provides support for OpenCAPI as implemented on POWER9.
*
* At present, we initialise the NPU separately from the NVLink code in npu2.c.
* As such, we don't currently support mixed NVLink and OpenCAPI configurations
* on the same NPU for machines such as Witherspoon.
*
* Procedure references in this file are to the POWER9 OpenCAPI NPU Workbook
* (IBM internal document).
*
* TODO:
* - Support for mixed NVLink and OpenCAPI on the same NPU
* - Support for link ganging (one AFU using multiple links)
* - Link reset and error handling
* - Presence detection
* - Consume HDAT NPU information
* - LPC Memory support
*
* Copyright 2013-2019 IBM Corp.
*/
#include <skiboot.h>
#include <xscom.h>
#include <io.h>
#include <timebase.h>
#include <pci.h>
#include <pci-cfg.h>
#include <pci-slot.h>
#include <interrupts.h>
#include <opal.h>
#include <opal-api.h>
#include <npu2.h>
#include <npu2-regs.h>
#include <phys-map.h>
#include <i2c.h>
#include <nvram.h>
#define NPU_IRQ_LEVELS_XSL 23
#define MAX_PE_HANDLE ((1 << 15) - 1)
#define TL_MAX_TEMPLATE 63
#define TL_RATE_BUF_SIZE 32
#define OCAPI_SLOT_NORMAL PCI_SLOT_STATE_NORMAL
#define OCAPI_SLOT_LINK PCI_SLOT_STATE_LINK
#define OCAPI_SLOT_LINK_START (OCAPI_SLOT_LINK + 1)
#define OCAPI_SLOT_LINK_WAIT (OCAPI_SLOT_LINK + 2)
#define OCAPI_SLOT_LINK_TRAINED (OCAPI_SLOT_LINK + 3)
#define OCAPI_SLOT_FRESET PCI_SLOT_STATE_FRESET
#define OCAPI_SLOT_FRESET_START (OCAPI_SLOT_FRESET + 1)
#define OCAPI_SLOT_FRESET_INIT (OCAPI_SLOT_FRESET + 2)
#define OCAPI_SLOT_FRESET_ASSERT_DELAY (OCAPI_SLOT_FRESET + 3)
#define OCAPI_SLOT_FRESET_DEASSERT_DELAY (OCAPI_SLOT_FRESET + 4)
#define OCAPI_SLOT_FRESET_INIT_DELAY (OCAPI_SLOT_FRESET + 5)
#define OCAPI_LINK_TRAINING_RETRIES 2
#define OCAPI_LINK_TRAINING_TIMEOUT 3000 /* ms */
#define OCAPI_LINK_STATE_TRAINED 0x7
enum npu2_link_training_state {
NPU2_TRAIN_DEFAULT, /* fully train the link */
NPU2_TRAIN_PRBS31, /* used for Signal Integrity testing */
NPU2_TRAIN_NONE, /* used for testing with loopback cable */
};
static enum npu2_link_training_state npu2_ocapi_training_state = NPU2_TRAIN_DEFAULT;
static const struct phb_ops npu2_opencapi_ops;
static inline uint64_t index_to_stack(uint64_t index) {
switch (index) {
case 2:
case 3:
return NPU2_STACK_STCK_1;
break;
case 4:
case 5:
return NPU2_STACK_STCK_2;
break;
default:
assert(false);
}
}
static inline uint64_t index_to_stacku(uint64_t index) {
switch (index) {
case 2:
case 3:
return NPU2_STACK_STCK_1U;
break;
case 4:
case 5:
return NPU2_STACK_STCK_2U;
break;
default:
assert(false);
}
}
static inline uint64_t index_to_block(uint64_t index) {
switch (index) {
case 2:
case 4:
return NPU2_BLOCK_OTL0;
break;
case 3:
case 5:
return NPU2_BLOCK_OTL1;
break;
default:
assert(false);
}
}
static uint64_t get_odl_status(uint32_t gcid, uint64_t index)
{
uint64_t reg, status_xscom;
status_xscom = OB_ODL_STATUS(index);
xscom_read(gcid, status_xscom, &reg);
return reg;
}
static uint64_t get_odl_training_status(uint32_t gcid, uint64_t index)
{
uint64_t status_xscom, reg;
status_xscom = OB_ODL_TRAINING_STATUS(index);
xscom_read(gcid, status_xscom, &reg);
return reg;
}
static uint64_t get_odl_endpoint_info(uint32_t gcid, uint64_t index)
{
uint64_t status_xscom, reg;
status_xscom = OB_ODL_ENDPOINT_INFO(index);
xscom_read(gcid, status_xscom, &reg);
return reg;
}
static void disable_nvlink(uint32_t gcid, int index)
{
uint64_t phy_config_scom, reg;
switch (index) {
case 2:
case 3:
phy_config_scom = OBUS_LL0_IOOL_PHY_CONFIG;
break;
case 4:
case 5:
phy_config_scom = OBUS_LL3_IOOL_PHY_CONFIG;
break;
default:
assert(false);
}
/* Disable NV-Link link layers */
xscom_read(gcid, phy_config_scom, &reg);
reg &= ~OBUS_IOOL_PHY_CONFIG_NV0_NPU_ENABLED;
reg &= ~OBUS_IOOL_PHY_CONFIG_NV1_NPU_ENABLED;
reg &= ~OBUS_IOOL_PHY_CONFIG_NV2_NPU_ENABLED;
xscom_write(gcid, phy_config_scom, reg);
}
/* Procedure 13.1.3.1 - select OCAPI vs NVLink for bricks 2-3/4-5 */
static void set_transport_mux_controls(uint32_t gcid, uint32_t scom_base,
int index, enum npu2_dev_type type)
{
/* Step 1 - Set Transport MUX controls to select correct OTL or NTL */
uint64_t reg;
uint64_t field;
/* TODO: Rework this to select for NVLink too */
assert(type == NPU2_DEV_TYPE_OPENCAPI);
prlog(PR_DEBUG, "OCAPI: %s: Setting transport mux controls\n", __func__);
/* Optical IO Transport Mux Config for Bricks 0-2 and 4-5 */
reg = npu2_scom_read(gcid, scom_base, NPU2_MISC_OPTICAL_IO_CFG0,
NPU2_MISC_DA_LEN_8B);
switch (index) {
case 0:
case 1:
/* not valid for OpenCAPI */
assert(false);
break;
case 2: /* OTL1.0 */
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_NDLMUX_BRK0TO2, reg);
field &= ~0b100;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_NDLMUX_BRK0TO2, reg,
field);
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK0TO1, reg);
field |= 0b10;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK0TO1, reg,
field);
break;
case 3: /* OTL1.1 */
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_NDLMUX_BRK0TO2, reg);
field &= ~0b010;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_NDLMUX_BRK0TO2, reg,
field);
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK0TO1, reg);
field |= 0b01;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK0TO1, reg,
field);
break;
case 4: /* OTL2.0 */
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK4TO5, reg);
field |= 0b10;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK4TO5, reg,
field);
break;
case 5: /* OTL2.1 */
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK4TO5, reg);
field |= 0b01;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK4TO5, reg,
field);
break;
default:
assert(false);
}
npu2_scom_write(gcid, scom_base, NPU2_MISC_OPTICAL_IO_CFG0,
NPU2_MISC_DA_LEN_8B, reg);
/*
* PowerBus Optical Miscellaneous Config Register - select
* OpenCAPI for b4/5 and A-Link for b3
*/
xscom_read(gcid, PU_IOE_PB_MISC_CFG, &reg);
switch (index) {
case 0:
case 1:
case 2:
case 3:
break;
case 4:
reg = SETFIELD(PU_IOE_PB_MISC_CFG_SEL_04_NPU_NOT_PB, reg, 1);
break;
case 5:
reg = SETFIELD(PU_IOE_PB_MISC_CFG_SEL_05_NPU_NOT_PB, reg, 1);
break;
}
xscom_write(gcid, PU_IOE_PB_MISC_CFG, reg);
}
static void assert_odl_reset(uint32_t gcid, int index)
{
uint64_t reg, config_xscom;
config_xscom = OB_ODL_CONFIG(index);
/* Reset ODL */
reg = OB_ODL_CONFIG_RESET;
reg = SETFIELD(OB_ODL_CONFIG_VERSION, reg, 0b000001);
reg = SETFIELD(OB_ODL_CONFIG_TRAIN_MODE, reg, 0b0110);
reg = SETFIELD(OB_ODL_CONFIG_SUPPORTED_MODES, reg, 0b0010);
reg |= OB_ODL_CONFIG_X4_BACKOFF_ENABLE;
reg = SETFIELD(OB_ODL_CONFIG_PHY_CNTR_LIMIT, reg, 0b1111);
reg |= OB_ODL_CONFIG_DEBUG_ENABLE;
reg = SETFIELD(OB_ODL_CONFIG_FWD_PROGRESS_TIMER, reg, 0b0110);
xscom_write(gcid, config_xscom, reg);
}
static void deassert_odl_reset(uint32_t gcid, int index)
{
uint64_t reg, config_xscom;
config_xscom = OB_ODL_CONFIG(index);
xscom_read(gcid, config_xscom, &reg);
reg &= ~OB_ODL_CONFIG_RESET;
xscom_write(gcid, config_xscom, reg);
}
static void enable_odl_phy_mux(uint32_t gcid, int index)
{
uint64_t reg;
uint64_t phy_config_scom;
prlog(PR_DEBUG, "OCAPI: %s: Enabling ODL to PHY MUXes\n", __func__);
/* Step 2 - Enable MUXes for ODL to PHY connection */
switch (index) {
case 2:
case 3:
phy_config_scom = OBUS_LL0_IOOL_PHY_CONFIG;
break;
case 4:
case 5:
phy_config_scom = OBUS_LL3_IOOL_PHY_CONFIG;
break;
default:
assert(false);
}
/*
* ODL must be in reset when enabling.
* It stays in reset until the link is trained
*/
assert_odl_reset(gcid, index);
/* PowerBus OLL PHY Training Config Register */
xscom_read(gcid, phy_config_scom, &reg);
/*
* Enable ODL to use shared PHYs
*
* On obus3, OTL0 is connected to ODL1 (and OTL1 to ODL0), so
* even if it may look odd at first, we do want to enable ODL0
* for links 2 and 5
*/
switch (index) {
case 2:
case 5:
reg |= OBUS_IOOL_PHY_CONFIG_ODL0_ENABLED;
break;
case 3:
case 4:
reg |= OBUS_IOOL_PHY_CONFIG_ODL1_ENABLED;
break;
}
/*
* Based on the platform, we may have to activate an extra mux
* to connect the ODL to the right set of lanes.
*
* FIXME: to be checked once we have merged with nvlink
* code. Need to verify that it's a platform parameter and not
* slot-dependent
*/
if (platform.ocapi->odl_phy_swap)
reg |= OBUS_IOOL_PHY_CONFIG_ODL_PHY_SWAP;
else
reg &= ~OBUS_IOOL_PHY_CONFIG_ODL_PHY_SWAP;
/* Disable A-Link link layers */
reg &= ~OBUS_IOOL_PHY_CONFIG_LINK0_OLL_ENABLED;
reg &= ~OBUS_IOOL_PHY_CONFIG_LINK1_OLL_ENABLED;
xscom_write(gcid, phy_config_scom, reg);
}
static void disable_alink_fp(uint32_t gcid)
{
uint64_t reg = 0;
prlog(PR_DEBUG, "OCAPI: %s: Disabling A-Link framer/parsers\n", __func__);
/* Step 3 - Disable A-Link framers/parsers */
/* TODO: Confirm if needed on OPAL system */
reg |= PU_IOE_PB_FP_CFG_FP0_FMR_DISABLE;
reg |= PU_IOE_PB_FP_CFG_FP0_PRS_DISABLE;
reg |= PU_IOE_PB_FP_CFG_FP1_FMR_DISABLE;
reg |= PU_IOE_PB_FP_CFG_FP1_PRS_DISABLE;
xscom_write(gcid, PU_IOE_PB_FP01_CFG, reg);
xscom_write(gcid, PU_IOE_PB_FP23_CFG, reg);
xscom_write(gcid, PU_IOE_PB_FP45_CFG, reg);
xscom_write(gcid, PU_IOE_PB_FP67_CFG, reg);
}
static void enable_xsl_clocks(uint32_t gcid, uint32_t scom_base, int index)
{
/* Step 5 - Enable Clocks in XSL */
prlog(PR_DEBUG, "OCAPI: %s: Enable clocks in XSL\n", __func__);
npu2_scom_write(gcid, scom_base, NPU2_REG_OFFSET(index_to_stack(index),
NPU2_BLOCK_XSL,
NPU2_XSL_WRAP_CFG),
NPU2_MISC_DA_LEN_8B, NPU2_XSL_WRAP_CFG_XSLO_CLOCK_ENABLE);
}
#define CQ_CTL_STATUS_TIMEOUT 10 /* milliseconds */
static int set_fence_control(uint32_t gcid, uint32_t scom_base,
int index, uint8_t status)
{
int stack, block;
uint64_t reg, status_field;
uint8_t status_val;
uint64_t fence_control;
uint64_t timeout = mftb() + msecs_to_tb(CQ_CTL_STATUS_TIMEOUT);
stack = index_to_stack(index);
block = index_to_block(index);
fence_control = NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL,
block == NPU2_BLOCK_OTL0 ?
NPU2_CQ_CTL_FENCE_CONTROL_0 :
NPU2_CQ_CTL_FENCE_CONTROL_1);
reg = SETFIELD(NPU2_CQ_CTL_FENCE_CONTROL_REQUEST_FENCE, 0ull, status);
npu2_scom_write(gcid, scom_base, fence_control,
NPU2_MISC_DA_LEN_8B, reg);
/* Wait for fence status to update */
if (index_to_block(index) == NPU2_BLOCK_OTL0)
status_field = NPU2_CQ_CTL_STATUS_BRK0_AM_FENCED;
else
status_field = NPU2_CQ_CTL_STATUS_BRK1_AM_FENCED;
do {
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(index_to_stack(index),
NPU2_BLOCK_CTL,
NPU2_CQ_CTL_STATUS),
NPU2_MISC_DA_LEN_8B);
status_val = GETFIELD(status_field, reg);
if (status_val == status)
return OPAL_SUCCESS;
time_wait_ms(1);
} while (tb_compare(mftb(), timeout) == TB_ABEFOREB);
/**
* @fwts-label OCAPIFenceStatusTimeout
* @fwts-advice The NPU fence status did not update as expected. This
* could be the result of a firmware or hardware bug. OpenCAPI
* functionality could be broken.
*/
prlog(PR_ERR,
"OCAPI: Fence status for brick %d stuck: expected 0x%x, got 0x%x\n",
index, status, status_val);
return OPAL_HARDWARE;
}
static void set_npcq_config(uint32_t gcid, uint32_t scom_base, int index)
{
uint64_t reg, stack, block;
prlog(PR_DEBUG, "OCAPI: %s: Set NPCQ Config\n", __func__);
/* Step 6 - Set NPCQ configuration */
/* CQ_CTL Misc Config Register #0 */
stack = index_to_stack(index);
block = index_to_block(index);
/* Enable OTL */
npu2_scom_write(gcid, scom_base, NPU2_OTL_CONFIG0(stack, block),
NPU2_MISC_DA_LEN_8B, NPU2_OTL_CONFIG0_EN);
set_fence_control(gcid, scom_base, index, 0b01);
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL,
NPU2_CQ_CTL_MISC_CFG),
NPU2_MISC_DA_LEN_8B);
/* Set OCAPI mode */
reg |= NPU2_CQ_CTL_MISC_CFG_CONFIG_OCAPI_MODE;
if (block == NPU2_BLOCK_OTL0)
reg |= NPU2_CQ_CTL_MISC_CFG_CONFIG_OTL0_ENABLE;
else
reg |= NPU2_CQ_CTL_MISC_CFG_CONFIG_OTL1_ENABLE;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL,
NPU2_CQ_CTL_MISC_CFG),
NPU2_MISC_DA_LEN_8B, reg);
/* NPU Fenced */
set_fence_control(gcid, scom_base, index, 0b11);
/* NPU Half Fenced */
set_fence_control(gcid, scom_base, index, 0b10);
/* CQ_DAT Misc Config Register #1 */
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_DAT,
NPU2_CQ_DAT_MISC_CFG),
NPU2_MISC_DA_LEN_8B);
/* Set OCAPI mode for bricks 2-5 */
reg |= NPU2_CQ_DAT_MISC_CFG_CONFIG_OCAPI_MODE;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_DAT,
NPU2_CQ_DAT_MISC_CFG),
NPU2_MISC_DA_LEN_8B, reg);
/* CQ_SM Misc Config Register #0 */
for (block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_CQ_SM_MISC_CFG0),
NPU2_MISC_DA_LEN_8B);
/* Set OCAPI mode for bricks 2-5 */
reg |= NPU2_CQ_SM_MISC_CFG0_CONFIG_OCAPI_MODE;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_CQ_SM_MISC_CFG0),
NPU2_MISC_DA_LEN_8B, reg);
}
}
static void enable_xsl_xts_interfaces(uint32_t gcid, uint32_t scom_base, int index)
{
uint64_t reg;
prlog(PR_DEBUG, "OCAPI: %s: Enable XSL-XTS Interfaces\n", __func__);
/* Step 7 - Enable XSL-XTS interfaces */
/* XTS Config Register - Enable XSL-XTS interface */
reg = npu2_scom_read(gcid, scom_base, NPU2_XTS_CFG, NPU2_MISC_DA_LEN_8B);
reg |= NPU2_XTS_CFG_OPENCAPI;
npu2_scom_write(gcid, scom_base, NPU2_XTS_CFG, NPU2_MISC_DA_LEN_8B, reg);
/* XTS Config2 Register - Enable XSL1/2 */
reg = npu2_scom_read(gcid, scom_base, NPU2_XTS_CFG2, NPU2_MISC_DA_LEN_8B);
switch (index_to_stack(index)) {
case NPU2_STACK_STCK_1:
reg |= NPU2_XTS_CFG2_XSL1_ENA;
break;
case NPU2_STACK_STCK_2:
reg |= NPU2_XTS_CFG2_XSL2_ENA;
break;
}
npu2_scom_write(gcid, scom_base, NPU2_XTS_CFG2, NPU2_MISC_DA_LEN_8B, reg);
}
static void enable_sm_allocation(uint32_t gcid, uint32_t scom_base, int index)
{
uint64_t reg, block;
int stack = index_to_stack(index);
prlog(PR_DEBUG, "OCAPI: %s: Enable State Machine Allocation\n", __func__);
/* Step 8 - Enable state-machine allocation */
/* Low-Water Marks Registers - Enable state machine allocation */
for (block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_LOW_WATER_MARKS),
NPU2_MISC_DA_LEN_8B);
reg |= NPU2_LOW_WATER_MARKS_ENABLE_MACHINE_ALLOC;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_LOW_WATER_MARKS),
NPU2_MISC_DA_LEN_8B, reg);
}
}
static void enable_pb_snooping(uint32_t gcid, uint32_t scom_base, int index)
{
uint64_t reg, block;
int stack = index_to_stack(index);
prlog(PR_DEBUG, "OCAPI: %s: Enable PowerBus snooping\n", __func__);
/* Step 9 - Enable PowerBus snooping */
/* CQ_SM Misc Config Register #0 - Enable PowerBus snooping */
for (block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_CQ_SM_MISC_CFG0),
NPU2_MISC_DA_LEN_8B);
reg |= NPU2_CQ_SM_MISC_CFG0_CONFIG_ENABLE_PBUS;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_CQ_SM_MISC_CFG0),
NPU2_MISC_DA_LEN_8B, reg);
}
}
static void brick_config(uint32_t gcid, uint32_t scom_base, int index)
{
/*
* We assume at this point that the PowerBus Hotplug Mode Control
* register is correctly set by Hostboot
*/
disable_nvlink(gcid, index);
set_transport_mux_controls(gcid, scom_base, index,
NPU2_DEV_TYPE_OPENCAPI);
enable_odl_phy_mux(gcid, index);
disable_alink_fp(gcid);
enable_xsl_clocks(gcid, scom_base, index);
set_npcq_config(gcid, scom_base, index);
enable_xsl_xts_interfaces(gcid, scom_base, index);
enable_sm_allocation(gcid, scom_base, index);
enable_pb_snooping(gcid, scom_base, index);
}
/* Procedure 13.1.3.4 - Brick to PE Mapping */
static void pe_config(struct npu2_dev *dev)
{
/* We currently use a fixed PE assignment per brick */
uint64_t val, reg;
val = NPU2_MISC_BRICK_BDF2PE_MAP_ENABLE;
val = SETFIELD(NPU2_MISC_BRICK_BDF2PE_MAP_PE, val, NPU2_OCAPI_PE(dev));
val = SETFIELD(NPU2_MISC_BRICK_BDF2PE_MAP_BDF, val, 0);
reg = NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC,
NPU2_MISC_BRICK0_BDF2PE_MAP0 +
(dev->brick_index * 0x18));
npu2_write(dev->npu, reg, val);
}
/* Procedure 13.1.3.5 - TL Configuration */
static void tl_config(uint32_t gcid, uint32_t scom_base, uint64_t index)
{
uint64_t reg;
uint64_t stack = index_to_stack(index);
uint64_t block = index_to_block(index);
prlog(PR_DEBUG, "OCAPI: %s: TL Configuration\n", __func__);
/* OTL Config 0 Register */
reg = 0;
/* OTL Enable */
reg |= NPU2_OTL_CONFIG0_EN;
/* Block PE Handle from ERAT Index */
reg |= NPU2_OTL_CONFIG0_BLOCK_PE_HANDLE;
/* OTL Brick ID */
reg = SETFIELD(NPU2_OTL_CONFIG0_BRICKID, reg, index - 2);
/* ERAT Hash 0 */
reg = SETFIELD(NPU2_OTL_CONFIG0_ERAT_HASH_0, reg, 0b011001);
/* ERAT Hash 1 */
reg = SETFIELD(NPU2_OTL_CONFIG0_ERAT_HASH_1, reg, 0b000111);
/* ERAT Hash 2 */
reg = SETFIELD(NPU2_OTL_CONFIG0_ERAT_HASH_2, reg, 0b101100);
/* ERAT Hash 3 */
reg = SETFIELD(NPU2_OTL_CONFIG0_ERAT_HASH_3, reg, 0b100110);
npu2_scom_write(gcid, scom_base, NPU2_OTL_CONFIG0(stack, block),
NPU2_MISC_DA_LEN_8B, reg);
/* OTL Config 1 Register */
reg = 0;
/*
* We leave Template 1-3 bits at 0 to force template 0 as required
* for unknown devices.
*
* Template 0 Transmit Rate is set to most conservative setting which
* will always be supported. Other Template Transmit rates are left
* unset and will be set later by OS.
*/
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_TEMP0_RATE, reg, 0b1111);
/* Extra wait cycles TXI-TXO */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_DRDY_WAIT, reg, 0b001);
/* Minimum Frequency to Return TLX Credits to AFU */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_CRET_FREQ, reg, 0b001);
/* Frequency to add age to Transmit Requests */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_AGE_FREQ, reg, 0b11000);
/* Response High Priority Threshold */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_RS2_HPWAIT, reg, 0b011011);
/* 4-slot Request High Priority Threshold */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_RQ4_HPWAIT, reg, 0b011011);
/* 6-slot Request High Priority */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_RQ6_HPWAIT, reg, 0b011011);
/* Stop the OCAPI Link on Uncorrectable Error
* TODO: Confirm final value - disabled for debug */
npu2_scom_write(gcid, scom_base, NPU2_OTL_CONFIG1(stack, block),
NPU2_MISC_DA_LEN_8B, reg);
/* TLX Credit Configuration Register */
reg = 0;
/* VC0/VC3/DCP0/DCP1 credits to send to AFU */
reg = SETFIELD(NPU2_OTL_TLX_CREDITS_VC0_CREDITS, reg, 0x40);
reg = SETFIELD(NPU2_OTL_TLX_CREDITS_VC3_CREDITS, reg, 0x40);
reg = SETFIELD(NPU2_OTL_TLX_CREDITS_DCP0_CREDITS, reg, 0x80);
reg = SETFIELD(NPU2_OTL_TLX_CREDITS_DCP1_CREDITS, reg, 0x80);
npu2_scom_write(gcid, scom_base, NPU2_OTL_TLX_CREDITS(stack, block),
NPU2_MISC_DA_LEN_8B, reg);
}
/* Detect Nimbus DD2.0 and DD2.01 */
static int get_nimbus_level(void)
{
struct proc_chip *chip = next_chip(NULL);
if (chip && chip->type == PROC_CHIP_P9_NIMBUS)
return chip->ec_level & 0xff;
return -1;
}
/* Procedure 13.1.3.6 - Address Translation Configuration */
static void address_translation_config(uint32_t gcid, uint32_t scom_base,
uint64_t index)
{
int chip_level;
uint64_t reg;
uint64_t stack = index_to_stack(index);
prlog(PR_DEBUG, "OCAPI: %s: Address Translation Configuration\n", __func__);
/* PSL_SCNTL_A0 Register */
/*
* ERAT shared between multiple AFUs
*
* The workbook has this bit around the wrong way from the hardware.
*
* TODO: handle correctly with link ganging
*/
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL,
NPU2_XSL_PSL_SCNTL_A0),
NPU2_MISC_DA_LEN_8B);
reg |= NPU2_XSL_PSL_SCNTL_A0_MULTI_AFU_DIAL;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL,
NPU2_XSL_PSL_SCNTL_A0),
NPU2_MISC_DA_LEN_8B, reg);
chip_level = get_nimbus_level();
if (chip_level == 0x20) {
/*
* Errata HW408041 (section 15.1.10 of NPU workbook)
* "RA mismatch when both tlbie and checkout response
* are seen in same cycle"
*/
/* XSL_GP Register - Bloom Filter Disable */
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, NPU2_XSL_GP),
NPU2_MISC_DA_LEN_8B);
/* To update XSL_GP, we must first write a magic value to it */
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, NPU2_XSL_GP),
NPU2_MISC_DA_LEN_8B, 0x0523790323000000UL);
reg &= ~NPU2_XSL_GP_BLOOM_FILTER_ENABLE;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, NPU2_XSL_GP),
NPU2_MISC_DA_LEN_8B, reg);
}
if (chip_level == 0x20 || chip_level == 0x21) {
/*
* DD2.0/2.1 EOA Bug. Fixed in DD2.2
*/
reg = 0x32F8000000000001UL;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL,
NPU2_XSL_DEF),
NPU2_MISC_DA_LEN_8B, reg);
}
}
/* TODO: Merge this with NVLink implementation - we don't use the npu2_bar
* wrapper for the PHY BARs yet */
static void write_bar(uint32_t gcid, uint32_t scom_base, uint64_t reg,
uint64_t addr, uint64_t size)
{
uint64_t val;
int block;
switch (NPU2_REG(reg)) {
case NPU2_PHY_BAR:
val = SETFIELD(NPU2_PHY_BAR_ADDR, 0ul, addr >> 21);
val = SETFIELD(NPU2_PHY_BAR_ENABLE, val, 1);
break;
case NPU2_NTL0_BAR:
case NPU2_NTL1_BAR:
val = SETFIELD(NPU2_NTL_BAR_ADDR, 0ul, addr >> 16);
val = SETFIELD(NPU2_NTL_BAR_SIZE, val, ilog2(size >> 16));
val = SETFIELD(NPU2_NTL_BAR_ENABLE, val, 1);
break;
case NPU2_GENID_BAR:
val = SETFIELD(NPU2_GENID_BAR_ADDR, 0ul, addr >> 16);
val = SETFIELD(NPU2_GENID_BAR_ENABLE, val, 1);
break;
default:
val = 0ul;
}
for (block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
npu2_scom_write(gcid, scom_base, NPU2_REG_OFFSET(0, block, reg),
NPU2_MISC_DA_LEN_8B, val);
prlog(PR_DEBUG, "OCAPI: Setting BAR %llx to %llx\n",
NPU2_REG_OFFSET(0, block, reg), val);
}
}
static void setup_global_mmio_bar(uint32_t gcid, uint32_t scom_base,
uint64_t reg[])
{
uint64_t addr, size;
prlog(PR_DEBUG, "OCAPI: patching up PHY0 bar, %s\n", __func__);
phys_map_get(gcid, NPU_PHY, 0, &addr, &size);
write_bar(gcid, scom_base,
NPU2_REG_OFFSET(NPU2_STACK_STCK_2, 0, NPU2_PHY_BAR),
addr, size);
prlog(PR_DEBUG, "OCAPI: patching up PHY1 bar, %s\n", __func__);
phys_map_get(gcid, NPU_PHY, 1, &addr, &size);
write_bar(gcid, scom_base,
NPU2_REG_OFFSET(NPU2_STACK_STCK_1, 0, NPU2_PHY_BAR),
addr, size);
prlog(PR_DEBUG, "OCAPI: setup global mmio, %s\n", __func__);
phys_map_get(gcid, NPU_REGS, 0, &addr, &size);
write_bar(gcid, scom_base,
NPU2_REG_OFFSET(NPU2_STACK_STCK_0, 0, NPU2_PHY_BAR),
addr, size);
reg[0] = addr;
reg[1] = size;
}
/* Procedure 13.1.3.8 - AFU MMIO Range BARs */
static void setup_afu_mmio_bars(uint32_t gcid, uint32_t scom_base,
struct npu2_dev *dev)
{
uint64_t stack = index_to_stack(dev->brick_index);
uint64_t offset = index_to_block(dev->brick_index) == NPU2_BLOCK_OTL0 ?
NPU2_NTL0_BAR : NPU2_NTL1_BAR;
uint64_t pa_offset = index_to_block(dev->brick_index) == NPU2_BLOCK_OTL0 ?
NPU2_CQ_CTL_MISC_MMIOPA0_CONFIG :
NPU2_CQ_CTL_MISC_MMIOPA1_CONFIG;
uint64_t addr, size, reg;
prlog(PR_DEBUG, "OCAPI: %s: Setup AFU MMIO BARs\n", __func__);
phys_map_get(gcid, NPU_OCAPI_MMIO, dev->brick_index, &addr, &size);
prlog(PR_DEBUG, "OCAPI: AFU MMIO set to %llx, size %llx\n", addr, size);
write_bar(gcid, scom_base, NPU2_REG_OFFSET(stack, 0, offset), addr,
size);
dev->bars[0].npu2_bar.base = addr;
dev->bars[0].npu2_bar.size = size;
reg = SETFIELD(NPU2_CQ_CTL_MISC_MMIOPA_ADDR, 0ull, addr >> 16);
reg = SETFIELD(NPU2_CQ_CTL_MISC_MMIOPA_SIZE, reg, ilog2(size >> 16));
prlog(PR_DEBUG, "OCAPI: PA translation %llx\n", reg);
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL,
pa_offset),
NPU2_MISC_DA_LEN_8B, reg);
}
/* Procedure 13.1.3.9 - AFU Config BARs */
static void setup_afu_config_bars(uint32_t gcid, uint32_t scom_base,
struct npu2_dev *dev)
{
uint64_t stack = index_to_stack(dev->brick_index);
int stack_num = stack - NPU2_STACK_STCK_0;
uint64_t addr, size;
prlog(PR_DEBUG, "OCAPI: %s: Setup AFU Config BARs\n", __func__);
phys_map_get(gcid, NPU_GENID, stack_num, &addr, &size);
prlog(PR_DEBUG, "OCAPI: Assigning GENID BAR: %016llx\n", addr);
write_bar(gcid, scom_base, NPU2_REG_OFFSET(stack, 0, NPU2_GENID_BAR),
addr, size);
dev->bars[1].npu2_bar.base = addr;
dev->bars[1].npu2_bar.size = size;
}
static void otl_enabletx(uint32_t gcid, uint32_t scom_base,
struct npu2_dev *dev)
{
uint64_t stack = index_to_stack(dev->brick_index);
uint64_t block = index_to_block(dev->brick_index);
uint64_t reg;
/* OTL Config 2 Register */
/* Transmit Enable */
OCAPIDBG(dev, "Enabling TX\n");
reg = 0;
reg |= NPU2_OTL_CONFIG2_TX_SEND_EN;
npu2_scom_write(gcid, scom_base, NPU2_OTL_CONFIG2(stack, block),
NPU2_MISC_DA_LEN_8B, reg);
reg = npu2_scom_read(gcid, scom_base, NPU2_OTL_VC_CREDITS(stack, block),
NPU2_MISC_DA_LEN_8B);
OCAPIDBG(dev, "credit counter: %llx\n", reg);
/* TODO: Abort if credits are zero */
}
static uint8_t get_reset_pin(struct npu2_dev *dev)
{
uint8_t pin;
switch (dev->brick_index) {
case 2:
pin = platform.ocapi->i2c_reset_brick2;
break;
case 3:
pin = platform.ocapi->i2c_reset_brick3;
break;
case 4:
pin = platform.ocapi->i2c_reset_brick4;
break;
case 5:
pin = platform.ocapi->i2c_reset_brick5;
break;
default:
assert(false);
}
return pin;
}
static void assert_adapter_reset(struct npu2_dev *dev)
{
uint8_t pin, data;
int rc;
pin = get_reset_pin(dev);
/*
* set the i2c reset pin in output mode
*
* On the 9554 device, register 3 is the configuration
* register and a pin is in output mode if its value is 0
*/
lock(&dev->npu->i2c_lock);
dev->npu->i2c_pin_mode &= ~pin;
data = dev->npu->i2c_pin_mode;
rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
0x3, 1,
&data, sizeof(data), 120);
if (rc)
goto err;
/* register 1 controls the signal, reset is active low */
dev->npu->i2c_pin_wr_state &= ~pin;
data = dev->npu->i2c_pin_wr_state;
rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
0x1, 1,
&data, sizeof(data), 120);
if (rc)
goto err;
unlock(&dev->npu->i2c_lock);
return;
err:
unlock(&dev->npu->i2c_lock);
/**
* @fwts-label OCAPIDeviceResetFailed
* @fwts-advice There was an error attempting to send
* a reset signal over I2C to the OpenCAPI device.
*/
OCAPIERR(dev, "Error writing I2C reset signal: %d\n", rc);
}
static void deassert_adapter_reset(struct npu2_dev *dev)
{
uint8_t pin, data;
int rc, rc2;
pin = get_reset_pin(dev);
/*
* All we need to do here is deassert the reset signal by
* setting the reset pin to high. However, we cannot leave the
* pin in output mode, as it can cause troubles with the
* opencapi adapter: when the slot is powered off (on a reboot
* for example), if the i2c controller is actively setting the
* reset signal to high, it maintains voltage on part of the
* fpga and can leak current. It can lead the fpga to be in an
* unspecified state and potentially cause damage.
*
* The circumvention is to set the pin back to input
* mode. There are pullup resistors on the planar on all
* platforms to make sure the signal will "naturally" be high,
* without the i2c controller actively setting it, so we won't
* have problems when the slot is powered off. And it takes
* the adapter out of reset.
*
* To summarize:
* 1. set the pin to input mode. That is enough to raise the
* signal
* 2. set the value of the pin to high. The pin is input mode,
* so it won't really do anything. But it's more coherent
* and avoids bad surprises on the next call to
* assert_adapter_reset()
*/
lock(&dev->npu->i2c_lock);
dev->npu->i2c_pin_mode |= pin;
data = dev->npu->i2c_pin_mode;
rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
0x3, 1,
&data, sizeof(data), 120);
dev->npu->i2c_pin_wr_state |= pin;
data = dev->npu->i2c_pin_wr_state;
rc2 = i2c_request_send(dev->npu->i2c_port_id_ocapi,
platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
0x1, 1,
&data, sizeof(data), 120);
unlock(&dev->npu->i2c_lock);
if (!rc)
rc = rc2;
if (rc) {
/**
* @fwts-label OCAPIDeviceResetFailed
* @fwts-advice There was an error attempting to send
* a reset signal over I2C to the OpenCAPI device.
*/
OCAPIERR(dev, "Error writing I2C reset signal: %d\n", rc);
}
}
static void setup_perf_counters(struct npu2_dev *dev)
{
uint64_t addr, reg, link;
/*
* setup the DLL perf counters to check CRC errors detected by
* the NPU or the adapter.
*
* Counter 0: link 0/ODL0, CRC error detected by ODL
* Counter 1: link 0/ODL0, CRC error detected by DLx
* Counter 2: link 1/ODL1, CRC error detected by ODL
* Counter 3: link 1/ODL1, CRC error detected by DLx
*/
if ((dev->brick_index == 2) || (dev->brick_index == 5))
link = 0;
else
link = 1;
addr = OB_DLL_PERF_MONITOR_CONFIG(dev->brick_index);
xscom_read(dev->npu->chip_id, addr, &reg);
if (link == 0) {
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_ENABLE, reg,
OB_DLL_PERF_MONITOR_CONFIG_LINK0);
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_ENABLE >> 2, reg,
OB_DLL_PERF_MONITOR_CONFIG_LINK0);
} else {
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_ENABLE >> 4, reg,
OB_DLL_PERF_MONITOR_CONFIG_LINK1);
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_ENABLE >> 6, reg,
OB_DLL_PERF_MONITOR_CONFIG_LINK1);
}
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_SIZE, reg,
OB_DLL_PERF_MONITOR_CONFIG_SIZE16);
xscom_write(dev->npu->chip_id,
OB_DLL_PERF_MONITOR_CONFIG(dev->brick_index), reg);
OCAPIDBG(dev, "perf counter config %llx = %llx\n", addr, reg);
addr = OB_DLL_PERF_MONITOR_SELECT(dev->brick_index);
xscom_read(dev->npu->chip_id, addr, &reg);
reg = SETFIELD(OB_DLL_PERF_MONITOR_SELECT_COUNTER >> (link * 16),
reg, OB_DLL_PERF_MONITOR_SELECT_CRC_ODL);
reg = SETFIELD(OB_DLL_PERF_MONITOR_SELECT_COUNTER >> ((link * 16) + 8),
reg, OB_DLL_PERF_MONITOR_SELECT_CRC_DLX);
xscom_write(dev->npu->chip_id, addr, reg);
OCAPIDBG(dev, "perf counter select %llx = %llx\n", addr, reg);
}
static void check_perf_counters(struct npu2_dev *dev)
{
uint64_t addr, reg, link0, link1;
addr = OB_DLL_PERF_COUNTER0(dev->brick_index);
xscom_read(dev->npu->chip_id, addr, &reg);
link0 = GETFIELD(PPC_BITMASK(0, 31), reg);
link1 = GETFIELD(PPC_BITMASK(32, 63), reg);
if (link0 || link1)
OCAPIERR(dev, "CRC error count link0=%08llx link1=%08llx\n",
link0, link1);
}
static void set_init_pattern(uint32_t gcid, struct npu2_dev *dev)
{
uint64_t reg, config_xscom;
config_xscom = OB_ODL_CONFIG(dev->brick_index);
/* Transmit Pattern A */
xscom_read(gcid, config_xscom, &reg);
reg = SETFIELD(OB_ODL_CONFIG_TRAIN_MODE, reg, 0b0001);
xscom_write(gcid, config_xscom, reg);
}
static void start_training(uint32_t gcid, struct npu2_dev *dev)
{
uint64_t reg, config_xscom;
config_xscom = OB_ODL_CONFIG(dev->brick_index);
/* Start training */
xscom_read(gcid, config_xscom, &reg);
reg = SETFIELD(OB_ODL_CONFIG_TRAIN_MODE, reg, 0b1000);
xscom_write(gcid, config_xscom, reg);
}
static int64_t npu2_opencapi_get_presence_state(struct pci_slot __unused *slot,
uint8_t *val)
{
/*
* Presence detection for OpenCAPI is currently done at the start of
* NPU initialisation, and we only create slots if a device is present.
* As such we will never be asked to get the presence of a slot that's
* empty.
*
* This may change if we ever support surprise hotplug down
* the track.
*/
*val = OPAL_PCI_SLOT_PRESENT;
return OPAL_SUCCESS;
}
static void fence_brick(struct npu2_dev *dev)
{
OCAPIDBG(dev, "Fencing brick\n");
set_fence_control(dev->npu->chip_id, dev->npu->xscom_base,
dev->brick_index, 0b11);
/* from 13.2.1, Quiesce Fence State */
npu2_write(dev->npu, NPU2_MISC_FENCE_STATE,
PPC_BIT(dev->brick_index + 6));
}
static void unfence_brick(struct npu2_dev *dev)
{
OCAPIDBG(dev, "Unfencing brick\n");
npu2_write(dev->npu, NPU2_MISC_FENCE_STATE,
PPC_BIT(dev->brick_index));
set_fence_control(dev->npu->chip_id, dev->npu->xscom_base,
dev->brick_index, 0b10);
set_fence_control(dev->npu->chip_id, dev->npu->xscom_base,
dev->brick_index, 0b00);
}
static enum OpalShpcLinkState get_link_width(uint64_t odl_status)
{
uint64_t tx_lanes, rx_lanes, state;
/*
* On P9, the 'trained mode' field of the ODL status is
* hard-coded to x8 and is useless for us. We need to look at
* the status of the individual lanes.
* The link trains at x8, x4 or not at all.
*/
state = GETFIELD(OB_ODL_STATUS_TRAINING_STATE_MACHINE, odl_status);
if (state != OCAPI_LINK_STATE_TRAINED)
return OPAL_SHPC_LINK_DOWN;
rx_lanes = GETFIELD(OB_ODL_STATUS_RX_TRAINED_LANES, odl_status);
tx_lanes = GETFIELD(OB_ODL_STATUS_TX_TRAINED_LANES, odl_status);
if ((rx_lanes != 0xFF) || (tx_lanes != 0xFF))
return OPAL_SHPC_LINK_UP_x4;
else
return OPAL_SHPC_LINK_UP_x8;
}
static int64_t npu2_opencapi_get_link_state(struct pci_slot *slot, uint8_t *val)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
uint64_t reg;
reg = get_odl_status(dev->npu->chip_id, dev->brick_index);
*val = get_link_width(reg);
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_get_power_state(struct pci_slot *slot,
uint8_t *val)
{
*val = slot->power_state;
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_set_power_state(struct pci_slot *slot, uint8_t val)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
switch (val) {
case PCI_SLOT_POWER_OFF:
OCAPIDBG(dev, "Fake power off\n");
fence_brick(dev);
assert_adapter_reset(dev);
slot->power_state = PCI_SLOT_POWER_OFF;
return OPAL_SUCCESS;
case PCI_SLOT_POWER_ON:
if (slot->power_state != PCI_SLOT_POWER_OFF)
return OPAL_SUCCESS;
OCAPIDBG(dev, "Fake power on\n");
slot->power_state = PCI_SLOT_POWER_ON;
slot->state = OCAPI_SLOT_NORMAL;
return OPAL_SUCCESS;
default:
return OPAL_UNSUPPORTED;
}
}
static void check_trained_link(struct npu2_dev *dev, uint64_t odl_status)
{
if (get_link_width(odl_status) != OPAL_SHPC_LINK_UP_x8) {
OCAPIERR(dev, "Link trained in degraded mode (%016llx)\n",
odl_status);
OCAPIDBG(dev, "Link endpoint info: %016llx\n",
get_odl_endpoint_info(dev->npu->chip_id, dev->brick_index));
}
}
static int64_t npu2_opencapi_retry_state(struct pci_slot *slot,
uint64_t odl_status)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
uint32_t chip_id = dev->npu->chip_id;
if (!slot->link_retries--) {
/**
* @fwts-label OCAPILinkTrainingFailed
* @fwts-advice The OpenCAPI link training procedure failed.
* This indicates a hardware or firmware bug. OpenCAPI
* functionality will not be available on this link.
*/
OCAPIERR(dev,
"Link failed to train, final link status: %016llx\n",
odl_status);
OCAPIDBG(dev, "Final link training status: %016llx\n",
get_odl_training_status(chip_id, dev->brick_index));
return OPAL_HARDWARE;
}
OCAPIERR(dev, "Link failed to train, retrying\n");
OCAPIDBG(dev, "Link status: %016llx, training status: %016llx\n",
odl_status,
get_odl_training_status(chip_id, dev->brick_index));
pci_slot_set_state(slot, OCAPI_SLOT_FRESET_INIT);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(1));
}
static void npu2_opencapi_prepare_link_change(struct pci_slot *slot __unused,
bool up __unused)
{
/*
* PCI hotplug wants it defined, but we don't need to do anything
*/
}
static int64_t npu2_opencapi_poll_link(struct pci_slot *slot)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
uint32_t chip_id = dev->npu->chip_id;
uint64_t reg;
switch (slot->state) {
case OCAPI_SLOT_NORMAL:
case OCAPI_SLOT_LINK_START:
OCAPIDBG(dev, "Start polling\n");
pci_slot_set_state(slot, OCAPI_SLOT_LINK_WAIT);
/* fall-through */
case OCAPI_SLOT_LINK_WAIT:
reg = get_odl_status(chip_id, dev->brick_index);
if (GETFIELD(OB_ODL_STATUS_TRAINING_STATE_MACHINE, reg) ==
OCAPI_LINK_STATE_TRAINED) {
OCAPIINF(dev, "link trained in %ld ms\n",
tb_to_msecs(mftb() - dev->train_start));
check_trained_link(dev, reg);
pci_slot_set_state(slot, OCAPI_SLOT_LINK_TRAINED);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(1));
}
if (tb_compare(mftb(), dev->train_timeout) == TB_AAFTERB)
return npu2_opencapi_retry_state(slot, reg);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(1));
case OCAPI_SLOT_LINK_TRAINED:
otl_enabletx(chip_id, dev->npu->xscom_base, dev);
pci_slot_set_state(slot, OCAPI_SLOT_NORMAL);
if (dev->flags & NPU2_DEV_BROKEN) {
OCAPIERR(dev, "Resetting a device which hit a previous error. Device recovery is not supported, so future behavior is undefined\n");
dev->flags &= ~NPU2_DEV_BROKEN;
}
check_perf_counters(dev);
dev->phb_ocapi.scan_map = 1;
return OPAL_SUCCESS;
default:
OCAPIERR(dev, "unexpected slot state %08x\n", slot->state);
}
pci_slot_set_state(slot, OCAPI_SLOT_NORMAL);
return OPAL_HARDWARE;
}
static int64_t npu2_opencapi_creset(struct pci_slot *slot)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
OCAPIERR(dev, "creset not supported\n");
return OPAL_UNSUPPORTED;
}
static int64_t npu2_opencapi_freset(struct pci_slot *slot)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
uint32_t chip_id = dev->npu->chip_id;
uint8_t presence = 1;
int rc;
switch (slot->state) {
case OCAPI_SLOT_NORMAL:
case OCAPI_SLOT_FRESET_START:
OCAPIDBG(dev, "FRESET starts\n");
if (slot->ops.get_presence_state)
slot->ops.get_presence_state(slot, &presence);
if (!presence) {
/*
* FIXME: if there's no card on the link, we
* should consider powering off the unused
* lanes to save energy
*/
OCAPIINF(dev, "no card detected\n");
return OPAL_SUCCESS;
}
slot->link_retries = OCAPI_LINK_TRAINING_RETRIES;
/* fall-through */
case OCAPI_SLOT_FRESET_INIT:
fence_brick(dev);
assert_odl_reset(chip_id, dev->brick_index);
assert_adapter_reset(dev);
pci_slot_set_state(slot,
OCAPI_SLOT_FRESET_ASSERT_DELAY);
/* assert for 5ms */
return pci_slot_set_sm_timeout(slot, msecs_to_tb(5));
case OCAPI_SLOT_FRESET_ASSERT_DELAY:
rc = npu2_opencapi_phy_reset(dev);
if (rc) {
OCAPIERR(dev, "FRESET: couldn't reset PHY state\n");
return OPAL_HARDWARE;
}
deassert_odl_reset(chip_id, dev->brick_index);
deassert_adapter_reset(dev);
pci_slot_set_state(slot,
OCAPI_SLOT_FRESET_DEASSERT_DELAY);
/* give 250ms to device to be ready */
return pci_slot_set_sm_timeout(slot, msecs_to_tb(250));
case OCAPI_SLOT_FRESET_DEASSERT_DELAY:
unfence_brick(dev);
set_init_pattern(chip_id, dev);
pci_slot_set_state(slot,
OCAPI_SLOT_FRESET_INIT_DELAY);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(5));
case OCAPI_SLOT_FRESET_INIT_DELAY:
/* Bump lanes - this improves training reliability */
npu2_opencapi_bump_ui_lane(dev);
start_training(chip_id, dev);
dev->train_start = mftb();
dev->train_timeout = dev->train_start + msecs_to_tb(OCAPI_LINK_TRAINING_TIMEOUT);
pci_slot_set_state(slot, OCAPI_SLOT_LINK_START);
return slot->ops.poll_link(slot);
default:
OCAPIERR(dev, "FRESET: unexpected slot state %08x\n",
slot->state);
}
pci_slot_set_state(slot, OCAPI_SLOT_NORMAL);
return OPAL_HARDWARE;
}
static int64_t npu2_opencapi_hreset(struct pci_slot *slot __unused)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
OCAPIERR(dev, "hreset not supported\n");
return OPAL_UNSUPPORTED;
}
static void make_slot_hotpluggable(struct pci_slot *slot, struct phb *phb)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
char name[40];
const char *label = NULL;
/*
* Add a few definitions to the DT so that the linux PCI
* hotplug framework can find the slot and identify it as
* hot-pluggable.
*
* The "ibm,slot-label" property is used by linux as the slot name
*/
slot->pluggable = 1;
pci_slot_add_dt_properties(slot, phb->dt_node);
if (platform.ocapi->ocapi_slot_label)
label = platform.ocapi->ocapi_slot_label(dev->npu->chip_id,
dev->brick_index);
if (!label) {
snprintf(name, sizeof(name), "OPENCAPI-%04x",
(int)PCI_SLOT_PHB_INDEX(slot->id));
label = name;
}
dt_add_property_string(phb->dt_node, "ibm,slot-label", label);
}
static struct pci_slot *npu2_opencapi_slot_create(struct phb *phb)
{
struct pci_slot *slot;
slot = pci_slot_alloc(phb, NULL);
if (!slot)
return slot;
/* TODO: Figure out other slot functions */
slot->ops.get_presence_state = npu2_opencapi_get_presence_state;
slot->ops.get_link_state = npu2_opencapi_get_link_state;
slot->ops.get_power_state = npu2_opencapi_get_power_state;
slot->ops.get_attention_state = NULL;
slot->ops.get_latch_state = NULL;
slot->ops.set_power_state = npu2_opencapi_set_power_state;
slot->ops.set_attention_state = NULL;
slot->ops.prepare_link_change = npu2_opencapi_prepare_link_change;
slot->ops.poll_link = npu2_opencapi_poll_link;
slot->ops.creset = npu2_opencapi_creset;
slot->ops.freset = npu2_opencapi_freset;
slot->ops.hreset = npu2_opencapi_hreset;
return slot;
}
static int64_t npu2_opencapi_pcicfg_check(struct npu2_dev *dev, uint32_t offset,
uint32_t size)
{
if (!dev || offset > 0xfff || (offset & (size - 1)))
return OPAL_PARAMETER;
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_pcicfg_read(struct phb *phb, uint32_t bdfn,
uint32_t offset, uint32_t size,
void *data)
{
uint64_t cfg_addr;
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
uint64_t genid_base;
int64_t rc;
rc = npu2_opencapi_pcicfg_check(dev, offset, size);
if (rc)
return rc;
genid_base = dev->bars[1].npu2_bar.base +
(index_to_block(dev->brick_index) == NPU2_BLOCK_OTL1 ? 256 : 0);
cfg_addr = NPU2_CQ_CTL_CONFIG_ADDR_ENABLE;
cfg_addr = SETFIELD(NPU2_CQ_CTL_CONFIG_ADDR_BUS_NUMBER |
NPU2_CQ_CTL_CONFIG_ADDR_DEVICE_NUMBER |
NPU2_CQ_CTL_CONFIG_ADDR_FUNCTION_NUMBER,
cfg_addr, bdfn);
cfg_addr = SETFIELD(NPU2_CQ_CTL_CONFIG_ADDR_REGISTER_NUMBER,
cfg_addr, offset & ~3u);
out_be64((beint64_t *)genid_base, cfg_addr);
sync();
switch (size) {
case 1:
*((uint8_t *)data) =
in_8((volatile uint8_t *)(genid_base + 128 + (offset & 3)));
break;
case 2:
*((uint16_t *)data) =
in_le16((volatile leint16_t *)(genid_base + 128 + (offset & 2)));
break;
case 4:
*((uint32_t *)data) = in_le32((volatile leint32_t *)(genid_base + 128));
break;
default:
return OPAL_PARAMETER;
}
return OPAL_SUCCESS;
}
#define NPU2_OPENCAPI_PCI_CFG_READ(size, type) \
static int64_t npu2_opencapi_pcicfg_read##size(struct phb *phb, \
uint32_t bdfn, \
uint32_t offset, \
type *data) \
{ \
/* Initialize data in case of error */ \
*data = (type)0xffffffff; \
return npu2_opencapi_pcicfg_read(phb, bdfn, offset, \
sizeof(type), data); \
}
static int64_t npu2_opencapi_pcicfg_write(struct phb *phb, uint32_t bdfn,
uint32_t offset, uint32_t size,
uint32_t data)
{
uint64_t cfg_addr;
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
uint64_t genid_base;
int64_t rc;
rc = npu2_opencapi_pcicfg_check(dev, offset, size);
if (rc)
return rc;
genid_base = dev->bars[1].npu2_bar.base +
(index_to_block(dev->brick_index) == NPU2_BLOCK_OTL1 ? 256 : 0);
cfg_addr = NPU2_CQ_CTL_CONFIG_ADDR_ENABLE;
cfg_addr = SETFIELD(NPU2_CQ_CTL_CONFIG_ADDR_BUS_NUMBER |
NPU2_CQ_CTL_CONFIG_ADDR_DEVICE_NUMBER |
NPU2_CQ_CTL_CONFIG_ADDR_FUNCTION_NUMBER,
cfg_addr, bdfn);
cfg_addr = SETFIELD(NPU2_CQ_CTL_CONFIG_ADDR_REGISTER_NUMBER,
cfg_addr, offset & ~3u);
out_be64((beint64_t *)genid_base, cfg_addr);
sync();
switch (size) {
case 1:
out_8((volatile uint8_t *)(genid_base + 128 + (offset & 3)),
data);
break;
case 2:
out_le16((volatile leint16_t *)(genid_base + 128 + (offset & 2)),
data);
break;
case 4:
out_le32((volatile leint32_t *)(genid_base + 128), data);
break;
default:
return OPAL_PARAMETER;
}
return OPAL_SUCCESS;
}
#define NPU2_OPENCAPI_PCI_CFG_WRITE(size, type) \
static int64_t npu2_opencapi_pcicfg_write##size(struct phb *phb, \
uint32_t bdfn, \
uint32_t offset, \
type data) \
{ \
return npu2_opencapi_pcicfg_write(phb, bdfn, offset, \
sizeof(type), data); \
}
NPU2_OPENCAPI_PCI_CFG_READ(8, u8)
NPU2_OPENCAPI_PCI_CFG_READ(16, u16)
NPU2_OPENCAPI_PCI_CFG_READ(32, u32)
NPU2_OPENCAPI_PCI_CFG_WRITE(8, u8)
NPU2_OPENCAPI_PCI_CFG_WRITE(16, u16)
NPU2_OPENCAPI_PCI_CFG_WRITE(32, u32)
static int64_t npu2_opencapi_ioda_reset(struct phb __unused *phb,
bool __unused purge)
{
/* Not relevant to OpenCAPI - we do this just to silence the error */
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_set_pe(struct phb *phb,
uint64_t pe_num,
uint64_t __unused bdfn,
uint8_t __unused bcompare,
uint8_t __unused dcompare,
uint8_t __unused fcompare,
uint8_t action)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
/*
* Ignored on OpenCAPI - we use fixed PE assignments. May need
* addressing when we support dual-link devices.
*
* We nonetheless store the PE reported by the OS so that we
* can send it back in case of error. If there are several PCI
* functions on the device, the OS can define many PEs, we
* only keep one, the OS will handle it.
*/
if (action != OPAL_MAP_PE && action != OPAL_UNMAP_PE)
return OPAL_PARAMETER;
if (action == OPAL_UNMAP_PE)
pe_num = -1;
dev->linux_pe = pe_num;
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_freeze_status(struct phb *phb __unused,
uint64_t pe_number __unused,
uint8_t *freeze_state,
uint16_t *pci_error_type,
uint16_t *severity)
{
*freeze_state = OPAL_EEH_STOPPED_NOT_FROZEN;
*pci_error_type = OPAL_EEH_NO_ERROR;
if (severity)
*severity = OPAL_EEH_SEV_NO_ERROR;
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_eeh_next_error(struct phb *phb,
uint64_t *first_frozen_pe,
uint16_t *pci_error_type,
uint16_t *severity)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
if (!first_frozen_pe || !pci_error_type || !severity)
return OPAL_PARAMETER;
if (dev->flags & NPU2_DEV_BROKEN) {
OCAPIDBG(dev, "Reporting device as broken\n");
*first_frozen_pe = dev->linux_pe;
*pci_error_type = OPAL_EEH_PHB_ERROR;
*severity = OPAL_EEH_SEV_PHB_DEAD;
} else {
*first_frozen_pe = -1;
*pci_error_type = OPAL_EEH_NO_ERROR;
*severity = OPAL_EEH_SEV_NO_ERROR;
}
return OPAL_SUCCESS;
}
static int npu2_add_mmio_regs(struct phb *phb, struct pci_device *pd,
void *data __unused)
{
uint32_t irq;
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
uint64_t block = index_to_block(dev->brick_index);
uint64_t stacku = index_to_stacku(dev->brick_index);
uint64_t dsisr, dar, tfc, handle;
/*
* Pass the hw irq number for the translation fault irq
* irq levels 23 -> 26 are for translation faults, 1 per brick
*/
irq = dev->npu->base_lsi + NPU_IRQ_LEVELS_XSL;
if (stacku == NPU2_STACK_STCK_2U)
irq += 2;
if (block == NPU2_BLOCK_OTL1)
irq++;
/*
* Add the addresses of the registers needed by the OS to handle
* faults. The OS accesses them by mmio.
*/
dsisr = (uint64_t) dev->npu->regs + NPU2_OTL_OSL_DSISR(stacku, block);
dar = (uint64_t) dev->npu->regs + NPU2_OTL_OSL_DAR(stacku, block);
tfc = (uint64_t) dev->npu->regs + NPU2_OTL_OSL_TFC(stacku, block);
handle = (uint64_t) dev->npu->regs + NPU2_OTL_OSL_PEHANDLE(stacku,
block);
dt_add_property_cells(pd->dn, "ibm,opal-xsl-irq", irq);
dt_add_property_cells(pd->dn, "ibm,opal-xsl-mmio",
hi32(dsisr), lo32(dsisr),
hi32(dar), lo32(dar),
hi32(tfc), lo32(tfc),
hi32(handle), lo32(handle));
return 0;
}
static void npu2_opencapi_final_fixup(struct phb *phb)
{
pci_walk_dev(phb, NULL, npu2_add_mmio_regs, NULL);
}
static void mask_nvlink_fir(struct npu2 *p)
{
uint64_t reg;
/*
* From section 13.1.3.10 of the NPU workbook: "the NV-Link
* Datalink Layer Stall and NoStall signals are used for a
* different purpose when the link is configured for
* OpenCAPI. Therefore, the corresponding bits in NPU FIR
* Register 1 must be masked and configured to NOT cause the
* NPU to go into Freeze or Fence mode or send an Interrupt."
*
* FIXME: will need to revisit when mixing nvlink with
* opencapi. Assumes an opencapi-only setup on both PHYs for
* now.
*/
/* Mask FIRs */
xscom_read(p->chip_id, p->xscom_base + NPU2_MISC_FIR1_MASK, &reg);
reg = SETFIELD(PPC_BITMASK(0, 11), reg, 0xFFF);
xscom_write(p->chip_id, p->xscom_base + NPU2_MISC_FIR1_MASK, reg);
/* freeze disable */
reg = npu2_scom_read(p->chip_id, p->xscom_base,
NPU2_MISC_FREEZE_ENABLE1, NPU2_MISC_DA_LEN_8B);
reg = SETFIELD(PPC_BITMASK(0, 11), reg, 0);
npu2_scom_write(p->chip_id, p->xscom_base,
NPU2_MISC_FREEZE_ENABLE1, NPU2_MISC_DA_LEN_8B, reg);
/* fence disable */
reg = npu2_scom_read(p->chip_id, p->xscom_base,
NPU2_MISC_FENCE_ENABLE1, NPU2_MISC_DA_LEN_8B);
reg = SETFIELD(PPC_BITMASK(0, 11), reg, 0);
npu2_scom_write(p->chip_id, p->xscom_base,
NPU2_MISC_FENCE_ENABLE1, NPU2_MISC_DA_LEN_8B, reg);
/* irq disable */
reg = npu2_scom_read(p->chip_id, p->xscom_base,
NPU2_MISC_IRQ_ENABLE1, NPU2_MISC_DA_LEN_8B);
reg = SETFIELD(PPC_BITMASK(0, 11), reg, 0);
npu2_scom_write(p->chip_id, p->xscom_base,
NPU2_MISC_IRQ_ENABLE1, NPU2_MISC_DA_LEN_8B, reg);
}
static int enable_interrupts(struct npu2 *p)
{
uint64_t reg, xsl_fault, xstop_override, xsl_mask;
/*
* We need to:
* - enable translation interrupts for all bricks
* - override most brick-fatal errors from FIR2 to send an
* interrupt instead of the default action of checkstopping
* the systems, since we can just fence the brick and keep
* the system alive.
* - the exception to the above is 2 FIRs for XSL errors
* resulting from bad AFU behavior, for which we don't want to
* checkstop but can't configure to send an error interrupt
* either, as the XSL errors are reported on 2 links (the
* XSL is shared between 2 links). Instead, we mask
* them. The XSL errors will result in an OTL error, which
* is reported only once, for the correct link.
*
* FIR bits configured to trigger an interrupt must have their
* default action masked
*/
xsl_fault = PPC_BIT(0) | PPC_BIT(1) | PPC_BIT(2) | PPC_BIT(3);
xstop_override = 0x0FFFEFC00F91B000;
xsl_mask = NPU2_CHECKSTOP_REG2_XSL_XLAT_REQ_WHILE_SPAP_INVALID |
NPU2_CHECKSTOP_REG2_XSL_INVALID_PEE;
xscom_read(p->chip_id, p->xscom_base + NPU2_MISC_FIR2_MASK, &reg);
reg |= xsl_fault | xstop_override | xsl_mask;
xscom_write(p->chip_id, p->xscom_base + NPU2_MISC_FIR2_MASK, reg);
reg = npu2_scom_read(p->chip_id, p->xscom_base, NPU2_MISC_IRQ_ENABLE2,
NPU2_MISC_DA_LEN_8B);
reg |= xsl_fault | xstop_override;
npu2_scom_write(p->chip_id, p->xscom_base, NPU2_MISC_IRQ_ENABLE2,
NPU2_MISC_DA_LEN_8B, reg);
/*
* Make sure the brick is fenced on those errors.
* Fencing is incompatible with freezing, but there's no
* freeze defined for FIR2, so we don't have to worry about it
*
* For the 2 XSL bits we ignore, we need to make sure they
* don't fence the link, as the NPU logic could allow it even
* when masked.
*/
reg = npu2_scom_read(p->chip_id, p->xscom_base, NPU2_MISC_FENCE_ENABLE2,
NPU2_MISC_DA_LEN_8B);
reg |= xstop_override;
reg &= ~NPU2_CHECKSTOP_REG2_XSL_XLAT_REQ_WHILE_SPAP_INVALID;
reg &= ~NPU2_CHECKSTOP_REG2_XSL_INVALID_PEE;
npu2_scom_write(p->chip_id, p->xscom_base, NPU2_MISC_FENCE_ENABLE2,
NPU2_MISC_DA_LEN_8B, reg);
mask_nvlink_fir(p);
return 0;
}
static void setup_debug_training_state(struct npu2_dev *dev)
{
npu2_opencapi_phy_reset(dev);
switch (npu2_ocapi_training_state) {
case NPU2_TRAIN_PRBS31:
OCAPIINF(dev, "sending PRBS31 pattern per NVRAM setting\n");
npu2_opencapi_phy_prbs31(dev);
break;
case NPU2_TRAIN_NONE:
OCAPIINF(dev, "link not trained per NVRAM setting\n");
break;
default:
assert(false);
}
}
static void setup_device(struct npu2_dev *dev)
{
struct dt_node *dn_phb;
struct pci_slot *slot;
uint64_t mm_win[2];
/* Populate PHB device node */
phys_map_get(dev->npu->chip_id, NPU_OCAPI_MMIO, dev->brick_index, &mm_win[0],
&mm_win[1]);
prlog(PR_DEBUG, "OCAPI: Setting MMIO window to %016llx + %016llx\n",
mm_win[0], mm_win[1]);
dn_phb = dt_new_addr(dt_root, "pciex", mm_win[0]);
assert(dn_phb);
dt_add_property_strings(dn_phb,
"compatible",
"ibm,power9-npu-opencapi-pciex",
"ibm,ioda2-npu2-opencapi-phb");
dt_add_property_cells(dn_phb, "#address-cells", 3);
dt_add_property_cells(dn_phb, "#size-cells", 2);
dt_add_property_cells(dn_phb, "#interrupt-cells", 1);
dt_add_property_cells(dn_phb, "bus-range", 0, 0xff);
dt_add_property_cells(dn_phb, "clock-frequency", 0x200, 0);
dt_add_property_cells(dn_phb, "interrupt-parent", get_ics_phandle());
dt_add_property_strings(dn_phb, "device_type", "pciex");
dt_add_property(dn_phb, "reg", mm_win, sizeof(mm_win));
dt_add_property_cells(dn_phb, "ibm,npu-index", dev->npu->index);
dt_add_property_cells(dn_phb, "ibm,phb-index",
npu2_get_phb_index(dev->brick_index));
dt_add_property_cells(dn_phb, "ibm,chip-id", dev->npu->chip_id);
dt_add_property_cells(dn_phb, "ibm,xscom-base", dev->npu->xscom_base);
dt_add_property_cells(dn_phb, "ibm,npcq", dev->npu->dt_node->phandle);
dt_add_property_cells(dn_phb, "ibm,links", 1);
dt_add_property(dn_phb, "ibm,mmio-window", mm_win, sizeof(mm_win));
dt_add_property_cells(dn_phb, "ibm,phb-diag-data-size", 0);
/*
* We ignore whatever PE numbers Linux tries to set, so we just
* advertise enough that Linux won't complain
*/
dt_add_property_cells(dn_phb, "ibm,opal-num-pes", NPU2_MAX_PE_NUM);
dt_add_property_cells(dn_phb, "ibm,opal-reserved-pe", NPU2_RESERVED_PE_NUM);
dt_add_property_cells(dn_phb, "ranges", 0x02000000,
hi32(mm_win[0]), lo32(mm_win[0]),
hi32(mm_win[0]), lo32(mm_win[0]),
hi32(mm_win[1]), lo32(mm_win[1]));
dev->phb_ocapi.dt_node = dn_phb;
dev->phb_ocapi.ops = &npu2_opencapi_ops;
dev->phb_ocapi.phb_type = phb_type_npu_v2_opencapi;
dev->phb_ocapi.scan_map = 0;
dev->bdfn = 0;
dev->linux_pe = -1;
/* TODO: Procedure 13.1.3.7 - AFU Memory Range BARs */
/* Procedure 13.1.3.8 - AFU MMIO Range BARs */
setup_afu_mmio_bars(dev->npu->chip_id, dev->npu->xscom_base, dev);
/* Procedure 13.1.3.9 - AFU Config BARs */
setup_afu_config_bars(dev->npu->chip_id, dev->npu->xscom_base, dev);
setup_perf_counters(dev);
npu2_opencapi_phy_init(dev);
set_fence_control(dev->npu->chip_id, dev->npu->xscom_base, dev->brick_index, 0b00);
pci_register_phb(&dev->phb_ocapi, OPAL_DYNAMIC_PHB_ID);
if (npu2_ocapi_training_state != NPU2_TRAIN_DEFAULT) {
setup_debug_training_state(dev);
} else {
slot = npu2_opencapi_slot_create(&dev->phb_ocapi);
if (!slot) {
/**
* @fwts-label OCAPICannotCreatePHBSlot
* @fwts-advice Firmware probably ran out of memory creating
* NPU slot. OpenCAPI functionality could be broken.
*/
prlog(PR_ERR, "OCAPI: Cannot create PHB slot\n");
}
make_slot_hotpluggable(slot, &dev->phb_ocapi);
}
return;
}
static void read_nvram_training_state(void)
{
const char *state;
state = nvram_query_dangerous("opencapi-link-training");
if (state) {
if (!strcmp(state, "prbs31"))
npu2_ocapi_training_state = NPU2_TRAIN_PRBS31;
else if (!strcmp(state, "none"))
npu2_ocapi_training_state = NPU2_TRAIN_NONE;
else
prlog(PR_WARNING,
"OCAPI: invalid training state in NVRAM: %s\n",
state);
}
}
int npu2_opencapi_init_npu(struct npu2 *npu)
{
struct npu2_dev *dev;
uint64_t reg[2];
assert(platform.ocapi);
read_nvram_training_state();
/* TODO: Test OpenCAPI with fast reboot and make it work */
disable_fast_reboot("OpenCAPI device enabled");
setup_global_mmio_bar(npu->chip_id, npu->xscom_base, reg);
npu->regs = (void *)reg[0];
for (int i = 0; i < npu->total_devices; i++) {
dev = &npu->devices[i];
if (dev->type != NPU2_DEV_TYPE_OPENCAPI)
continue;
prlog(PR_INFO, "OCAPI: Configuring link index %d, brick %d\n",
dev->link_index, dev->brick_index);
/* Procedure 13.1.3.1 - Select OCAPI vs NVLink */
brick_config(npu->chip_id, npu->xscom_base, dev->brick_index);
/* Procedure 13.1.3.4 - Brick to PE Mapping */
pe_config(dev);
/* Procedure 13.1.3.5 - Transaction Layer Configuration */
tl_config(npu->chip_id, npu->xscom_base, dev->brick_index);
/* Procedure 13.1.3.6 - Address Translation Configuration */
address_translation_config(npu->chip_id, npu->xscom_base, dev->brick_index);
}
enable_interrupts(npu);
for (int i = 0; i < npu->total_devices; i++) {
dev = &npu->devices[i];
if (dev->type != NPU2_DEV_TYPE_OPENCAPI)
continue;
setup_device(dev);
}
return 0;
}
static const struct phb_ops npu2_opencapi_ops = {
.cfg_read8 = npu2_opencapi_pcicfg_read8,
.cfg_read16 = npu2_opencapi_pcicfg_read16,
.cfg_read32 = npu2_opencapi_pcicfg_read32,
.cfg_write8 = npu2_opencapi_pcicfg_write8,
.cfg_write16 = npu2_opencapi_pcicfg_write16,
.cfg_write32 = npu2_opencapi_pcicfg_write32,
.device_init = NULL,
.phb_final_fixup = npu2_opencapi_final_fixup,
.ioda_reset = npu2_opencapi_ioda_reset,
.papr_errinjct_reset = NULL,
.pci_reinit = NULL,
.set_phb_mem_window = NULL,
.phb_mmio_enable = NULL,
.map_pe_mmio_window = NULL,
.map_pe_dma_window = NULL,
.map_pe_dma_window_real = NULL,
.pci_msi_eoi = NULL,
.set_xive_pe = NULL,
.get_msi_32 = NULL,
.get_msi_64 = NULL,
.set_pe = npu2_opencapi_set_pe,
.set_peltv = NULL,
.eeh_freeze_status = npu2_opencapi_freeze_status,
.eeh_freeze_clear = NULL,
.eeh_freeze_set = NULL,
.next_error = npu2_opencapi_eeh_next_error,
.err_inject = NULL,
.get_diag_data2 = NULL,
.set_capi_mode = NULL,
.set_capp_recovery = NULL,
.tce_kill = NULL,
};
void npu2_opencapi_set_broken(struct npu2 *npu, int brick)
{
struct phb *phb;
struct npu2_dev *dev;
for_each_phb(phb) {
if (phb->phb_type == phb_type_npu_v2_opencapi) {
dev = phb_to_npu2_dev_ocapi(phb);
if (dev->npu == npu &&
dev->brick_index == brick)
dev->flags |= NPU2_DEV_BROKEN;
}
}
}
static int64_t opal_npu_spa_setup(uint64_t phb_id, uint32_t __unused bdfn,
uint64_t addr, uint64_t PE_mask)
{
uint64_t stack, block, offset, reg;
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
int rc;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
/* 4k aligned */
if (addr & 0xFFF)
return OPAL_PARAMETER;
if (PE_mask > 15)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
block = index_to_block(dev->brick_index);
stack = index_to_stack(dev->brick_index);
if (block == NPU2_BLOCK_OTL1)
offset = NPU2_XSL_PSL_SPAP_A1;
else
offset = NPU2_XSL_PSL_SPAP_A0;
lock(&dev->npu->lock);
/*
* set the SPAP used by the device
*/
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, offset),
NPU2_MISC_DA_LEN_8B);
if ((addr && (reg & NPU2_XSL_PSL_SPAP_EN)) ||
(!addr && !(reg & NPU2_XSL_PSL_SPAP_EN))) {
rc = OPAL_BUSY;
goto out;
}
/* SPA is disabled by passing a NULL address */
reg = addr;
if (addr)
reg = addr | NPU2_XSL_PSL_SPAP_EN;
npu2_scom_write(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, offset),
NPU2_MISC_DA_LEN_8B, reg);
/*
* set the PE mask that the OS uses for PASID -> PE handle
* conversion
*/
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_OTL_CONFIG0(stack, block), NPU2_MISC_DA_LEN_8B);
reg &= ~NPU2_OTL_CONFIG0_PE_MASK;
reg |= (PE_mask << (63-7));
npu2_scom_write(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_OTL_CONFIG0(stack, block), NPU2_MISC_DA_LEN_8B,
reg);
rc = OPAL_SUCCESS;
out:
unlock(&dev->npu->lock);
return rc;
}
opal_call(OPAL_NPU_SPA_SETUP, opal_npu_spa_setup, 4);
static int64_t opal_npu_spa_clear_cache(uint64_t phb_id, uint32_t __unused bdfn,
uint64_t PE_handle)
{
uint64_t cc_inv, stack, block, reg, rc;
uint32_t retries = 5;
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
if (PE_handle > MAX_PE_HANDLE)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
block = index_to_block(dev->brick_index);
stack = index_to_stack(dev->brick_index);
cc_inv = NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, NPU2_XSL_PSL_LLCMD_A0);
lock(&dev->npu->lock);
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base, cc_inv,
NPU2_MISC_DA_LEN_8B);
if (reg & PPC_BIT(16)) {
rc = OPAL_BUSY;
goto out;
}
reg = PE_handle | PPC_BIT(15);
if (block == NPU2_BLOCK_OTL1)
reg |= PPC_BIT(48);
npu2_scom_write(dev->npu->chip_id, dev->npu->xscom_base, cc_inv,
NPU2_MISC_DA_LEN_8B, reg);
rc = OPAL_HARDWARE;
while (retries--) {
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base,
cc_inv, NPU2_MISC_DA_LEN_8B);
if (!(reg & PPC_BIT(16))) {
rc = OPAL_SUCCESS;
break;
}
/* the bit expected to flip in less than 200us */
time_wait_us(200);
}
out:
unlock(&dev->npu->lock);
return rc;
}
opal_call(OPAL_NPU_SPA_CLEAR_CACHE, opal_npu_spa_clear_cache, 3);
static int get_template_rate(unsigned int templ, char *rate_buf)
{
int shift, idx, val;
/*
* Each rate is encoded over 4 bits (0->15), with 15 being the
* slowest. The buffer is a succession of rates for all the
* templates. The first 4 bits are for template 63, followed
* by 4 bits for template 62, ... etc. So the rate for
* template 0 is at the very end of the buffer.
*/
idx = (TL_MAX_TEMPLATE - templ) / 2;
shift = 4 * (1 - ((TL_MAX_TEMPLATE - templ) % 2));
val = rate_buf[idx] >> shift;
return val;
}
static bool is_template_supported(unsigned int templ, long capabilities)
{
return !!(capabilities & (1ull << templ));
}
static int64_t opal_npu_tl_set(uint64_t phb_id, uint32_t __unused bdfn,
long capabilities, uint64_t rate_phys, int rate_sz)
{
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
uint64_t stack, block, reg, templ_rate;
int i, rate_pos;
char *rate = (char *) rate_phys;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
if (!opal_addr_valid(rate) || rate_sz != TL_RATE_BUF_SIZE)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
block = index_to_block(dev->brick_index);
stack = index_to_stack(dev->brick_index);
/*
* The 'capabilities' argument defines what TL template the
* device can receive. OpenCAPI 3.0 and 4.0 define 64 templates, so
* that's one bit per template.
*
* For each template, the device processing time may vary, so
* the device advertises at what rate a message of a given
* template can be sent. That's encoded in the 'rate' buffer.
*
* On P9, NPU only knows about TL templates 0 -> 3.
* Per the spec, template 0 must be supported.
*/
if (!is_template_supported(0, capabilities))
return OPAL_PARAMETER;
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_OTL_CONFIG1(stack, block),
NPU2_MISC_DA_LEN_8B);
reg &= ~(NPU2_OTL_CONFIG1_TX_TEMP1_EN | NPU2_OTL_CONFIG1_TX_TEMP2_EN |
NPU2_OTL_CONFIG1_TX_TEMP3_EN);
for (i = 0; i < 4; i++) {
/* Skip template 0 as it is implicitly enabled */
if (i && is_template_supported(i, capabilities))
reg |= PPC_BIT(i);
/* The tx rate should still be set for template 0 */
templ_rate = get_template_rate(i, rate);
rate_pos = 8 + i * 4;
reg = SETFIELD(PPC_BITMASK(rate_pos, rate_pos + 3), reg,
templ_rate);
}
npu2_scom_write(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_OTL_CONFIG1(stack, block), NPU2_MISC_DA_LEN_8B,
reg);
OCAPIDBG(dev, "OTL configuration 1 register set to %llx\n", reg);
return OPAL_SUCCESS;
}
opal_call(OPAL_NPU_TL_SET, opal_npu_tl_set, 5);
static void set_mem_bar(struct npu2_dev *dev, uint64_t base, uint64_t size)
{
uint64_t stack, val, reg, bar_offset, pa_config_offset;
uint8_t memsel;
stack = index_to_stack(dev->brick_index);
switch (dev->brick_index) {
case 2:
case 4:
bar_offset = NPU2_GPU0_MEM_BAR;
pa_config_offset = NPU2_CQ_CTL_MISC_PA0_CONFIG;
break;
case 3:
case 5:
bar_offset = NPU2_GPU1_MEM_BAR;
pa_config_offset = NPU2_CQ_CTL_MISC_PA1_CONFIG;
break;
default:
assert(false);
}
assert((!size && !base) || (size && base));
/*
* Memory select configuration:
* - 0b000 - BAR disabled
* - 0b001 - match 0b00, 0b01
* - 0b010 - match 0b01, 0b10
* - 0b011 - match 0b00, 0b10
* - 0b100 - match 0b00
* - 0b101 - match 0b01
* - 0b110 - match 0b10
* - 0b111 - match 0b00, 0b01, 0b10
*/
memsel = GETFIELD(PPC_BITMASK(13, 14), base);
if (size)
val = SETFIELD(NPU2_MEM_BAR_EN | NPU2_MEM_BAR_SEL_MEM, 0ULL, 0b100 + memsel);
else
val = 0;
/* Base address - 12 bits, 1G aligned */
val = SETFIELD(NPU2_MEM_BAR_NODE_ADDR, val, GETFIELD(PPC_BITMASK(22, 33), base));
/* GCID */
val = SETFIELD(NPU2_MEM_BAR_GROUP, val, GETFIELD(PPC_BITMASK(15, 18), base));
val = SETFIELD(NPU2_MEM_BAR_CHIP, val, GETFIELD(PPC_BITMASK(19, 21), base));
/* Other settings */
val = SETFIELD(NPU2_MEM_BAR_POISON, val, 1);
val = SETFIELD(NPU2_MEM_BAR_GRANULE, val, 0);
val = SETFIELD(NPU2_MEM_BAR_BAR_SIZE, val, ilog2(size >> 30));
val = SETFIELD(NPU2_MEM_BAR_MODE, val, 0);
for (int block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
reg = NPU2_REG_OFFSET(stack, block, bar_offset);
npu2_write(dev->npu, reg, val);
}
/* Set PA config */
if (size)
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_MEMSELMATCH, 0ULL, 0b100 + memsel);
else
val = 0;
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_GRANULE, val, 0);
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_SIZE, val, ilog2(size >> 30));
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_MODE, val, 0);
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_MASK, val, 0);
reg = NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL, pa_config_offset);
npu2_write(dev->npu, reg, val);
}
static int64_t alloc_mem_bar(struct npu2_dev *dev, uint64_t size, uint64_t *bar)
{
uint64_t phys_map_base, phys_map_size, val;
int rc = OPAL_SUCCESS;
lock(&dev->npu->lock);
if (dev->lpc_mem_base) {
OCAPIERR(dev, "LPC allocation failed - BAR already in use\n");
rc = OPAL_RESOURCE;
goto out;
}
/*
* The supported chip address extension mask is 1100 100 (mask
* off 2 bits from group ID and 1 bit from chip ID).
*
* Fall back to only permitting a single allocation if we
* don't see this mask value.
*/
xscom_read(dev->npu->chip_id, PB_CENT_MODE, &val);
if (GETFIELD(PB_CFG_CHIP_ADDR_EXTENSION_MASK_CENT, val) == 0b1100100) {
phys_map_get(dev->npu->chip_id, OCAPI_MEM,
dev->brick_index - 2, &phys_map_base,
&phys_map_size);
} else {
bool in_use = false;
for (int i = 0; i < dev->npu->total_devices; i++) {
if (dev->npu->devices[i].lpc_mem_base)
in_use = true;
}
if (in_use) {
OCAPIERR(dev, "LPC allocation failed - single device per chip limit, FW upgrade required (pb_cent_mode=0x%016llx)\n", val);
rc = OPAL_RESOURCE;
goto out;
}
phys_map_get(dev->npu->chip_id, OCAPI_MEM, 0, &phys_map_base,
&phys_map_size);
}
if (size > phys_map_size) {
/**
* @fwts-label OCAPIInvalidLPCMemoryBARSize
* @fwts-advice The operating system requested an unsupported
* amount of OpenCAPI LPC memory. This is possibly a kernel
* bug, or you may need to upgrade your firmware.
*/
OCAPIERR(dev, "Invalid LPC memory BAR allocation size requested: 0x%llx bytes (limit 0x%llx)\n",
size, phys_map_size);
rc = OPAL_PARAMETER;
goto out;
}
/* Minimum BAR size is 1 GB */
if (size < (1 << 30)) {
size = 1 << 30;
}
if (!is_pow2(size)) {
size = 1ull << (ilog2(size) + 1);
}
set_mem_bar(dev, phys_map_base, size);
*bar = phys_map_base;
dev->lpc_mem_base = phys_map_base;
dev->lpc_mem_size = size;
out:
unlock(&dev->npu->lock);
return rc;
}
static int64_t release_mem_bar(struct npu2_dev *dev)
{
int rc = OPAL_SUCCESS;
lock(&dev->npu->lock);
if (!dev->lpc_mem_base) {
rc = OPAL_PARAMETER;
goto out;
}
set_mem_bar(dev, 0, 0);
dev->lpc_mem_base = 0;
dev->lpc_mem_size = 0;
out:
unlock(&dev->npu->lock);
return rc;
}
static int64_t opal_npu_mem_alloc(uint64_t phb_id, uint32_t __unused bdfn,
uint64_t size, __be64 *__bar)
{
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
uint64_t bar;
int64_t rc;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
if (!opal_addr_valid(__bar))
return OPAL_PARAMETER;
rc = alloc_mem_bar(dev, size, &bar);
if (rc == OPAL_SUCCESS)
*__bar = cpu_to_be64(bar);
return rc;
}
opal_call(OPAL_NPU_MEM_ALLOC, opal_npu_mem_alloc, 4);
static int64_t opal_npu_mem_release(uint64_t phb_id, uint32_t __unused bdfn)
{
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
return release_mem_bar(dev);
}
opal_call(OPAL_NPU_MEM_RELEASE, opal_npu_mem_release, 2);