| #!/bin/bash |
| # |
| |
| ################################################################################# |
| # # |
| # TPM2 regression test # |
| # Written by Ken Goldman # |
| # IBM Thomas J. Watson Research Center # |
| # # |
| # (c) Copyright IBM Corporation 2015 - 2020 # |
| # # |
| # All rights reserved. # |
| # # |
| # Redistribution and use in source and binary forms, with or without # |
| # modification, are permitted provided that the following conditions are # |
| # met: # |
| # # |
| # Redistributions of source code must retain the above copyright notice, # |
| # this list of conditions and the following disclaimer. # |
| # # |
| # Redistributions in binary form must reproduce the above copyright # |
| # notice, this list of conditions and the following disclaimer in the # |
| # documentation and/or other materials provided with the distribution. # |
| # # |
| # Neither the names of the IBM Corporation nor the names of its # |
| # contributors may be used to endorse or promote products derived from # |
| # this software without specific prior written permission. # |
| # # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # |
| # HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # |
| # # |
| ################################################################################# |
| |
| # openssl keys to use in this file |
| |
| echo "" |
| echo "Test RSA" |
| echo "" |
| |
| for BITS in 2048 3072 |
| do |
| |
| echo "generate the RSA $BITS encryption key with openssl" |
| openssl genrsa -out tmpkeypairrsa${BITS}.pem -aes256 -passout pass:rrrr 2048 > run.out 2>&1 |
| |
| echo "Convert key pair to plaintext DER format" |
| openssl rsa -inform pem -outform der -in tmpkeypairrsa${BITS}.pem -out tmpkeypairrsa${BITS}.der -passin pass:rrrr > run.out 2>&1 |
| |
| done |
| |
| echo "" |
| echo "RSA decryption key" |
| echo "" |
| |
| for BITS in 2048 3072 |
| do |
| |
| echo "Load the RSA $BITS decryption key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr derrsa${BITS}priv.bin -ipu derrsa${BITS}pub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "RSA encrypt with the $BITS encryption key" |
| ${PREFIX}rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| checkSuccess $? |
| |
| echo "RSA decrypt with the ${BITS} decryption key" |
| ${PREFIX}rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin -pwdk dec > run.out |
| checkSuccess $? |
| |
| echo "Verify the decrypt result" |
| tail -c 3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the $BITS decryption key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "" |
| echo "RSA decryption key to sign with OID" |
| echo "" |
| |
| for BITS in 2048 3072 |
| do |
| |
| echo "Load the RSA $BITS decryption key" |
| ${PREFIX}load -hp 80000000 -ipu derrsa${BITS}pub.bin -ipr derrsa${BITS}priv.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| HALG=(${ITERATE_ALGS}) |
| HSIZ=("20" "32" "48" "64") |
| |
| for ((i = 0 ; i < 4 ; i++)) |
| do |
| |
| echo "Decrypt/Sign with a caller specified OID - ${HALG[i]}" |
| ${PREFIX}rsadecrypt -hk 80000001 -pwdk dec -ie policies/${HALG[i]}aaa.bin -od tmpsig.bin -oid ${HALG[i]} > run.out |
| checkSuccess $? |
| |
| echo "Encrypt/Verify - ${HALG[i]}" |
| ${PREFIX}rsaencrypt -hk 80000001 -id tmpsig.bin -oe tmpmsg.bin > run.out |
| checkSuccess $? |
| |
| echo "Verify Result - ${HALG[i]} ${HSIZ[i]} bytes" |
| tail -c ${HSIZ[i]} tmpmsg.bin > tmpdig.bin |
| diff tmpdig.bin policies/${HALG[i]}aaa.bin > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "Flush the RSA ${BITS} decryption key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "" |
| echo "Import PEM RSA encryption key" |
| echo "" |
| |
| echo "Start an HMAC auth session" |
| ${PREFIX}startauthsession -se h > run.out |
| checkSuccess $? |
| |
| for BITS in 2048 3072 |
| do |
| |
| for SESS in "" "-se0 02000000 1" |
| do |
| |
| echo "Import the $BITS encryption key under the primary key" |
| ${PREFIX}importpem -hp 80000000 -den -pwdp sto -ipem tmpkeypairrsa${BITS}.pem -pwdk rrrr -opu tmppub.bin -opr tmppriv.bin > run.out |
| checkSuccess $? |
| |
| echo "Load the TPM encryption key" |
| ${PREFIX}load -hp 80000000 -pwdp sto -ipu tmppub.bin -ipr tmppriv.bin > run.out |
| checkSuccess $? |
| |
| echo "Sign the message ${SESS} - should fail" |
| ${PREFIX}sign -hk 80000001 -pwdk rrrr -if policies/aaa -os tmpsig.bin ${SESS} > run.out |
| checkFailure $? |
| |
| echo "RSA encrypt with the encryption key" |
| ${PREFIX}rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| checkSuccess $? |
| |
| echo "RSA decrypt with the decryption key ${SESS}" |
| ${PREFIX}rsadecrypt -hk 80000001 -pwdk rrrr -ie enc.bin -od dec.bin ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Verify the decrypt result" |
| tail -c 3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the encryption key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| done |
| |
| done |
| |
| echo "Flush the session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Loadexternal DER encryption key" |
| echo "" |
| |
| for BITS in 2048 3072 |
| do |
| |
| echo "Start an HMAC auth session" |
| ${PREFIX}startauthsession -se h > run.out |
| checkSuccess $? |
| |
| for SESS in "" "-se0 02000000 1" |
| do |
| |
| echo "Load the openssl key pair in the NULL hierarchy 80000001" |
| ${PREFIX}loadexternal -den -ider tmpkeypairrsa${BITS}.der -pwdk rrrr > run.out |
| checkSuccess $? |
| |
| echo "RSA encrypt with the encryption key" |
| ${PREFIX}rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| checkSuccess $? |
| |
| echo "RSA decrypt with the decryption key ${SESS}" |
| ${PREFIX}rsadecrypt -hk 80000001 -pwdk rrrr -ie enc.bin -od dec.bin ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Verify the decrypt result" |
| tail -c 3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the encryption key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "Flush the session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "" |
| echo "Encrypt with OpenSSL OAEP, decrypt with TPM" |
| echo "" |
| |
| echo "Create OAEP encryption key" |
| ${PREFIX}create -hp 80000000 -pwdp sto -deo -kt f -kt p -halg sha1 -opr tmpprivkey.bin -opu tmppubkey.bin -opem tmppubkey.pem > run.out |
| checkSuccess $? |
| |
| echo "Load encryption key at 80000001" |
| ${PREFIX}load -hp 80000000 -pwdp sto -ipr tmpprivkey.bin -ipu tmppubkey.bin > run.out |
| checkSuccess $? |
| |
| echo "Encrypt using OpenSSL and the PEM public key" |
| openssl rsautl -oaep -encrypt -inkey tmppubkey.pem -pubin -in policies/aaa -out enc.bin > run.out 2>&1 |
| checkSuccess $? |
| |
| echo "Decrypt using TPM key at 80000001" |
| ${PREFIX}rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin > run.out |
| checkSuccess $? |
| |
| echo "Verify the decrypt result" |
| diff policies/aaa dec.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the encryption key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Child RSA decryption key RSAES" |
| echo "" |
| |
| echo "Create RSAES encryption key" |
| ${PREFIX}create -hp 80000000 -pwdp sto -dee -opr deepriv.bin -opu deepub.bin > run.out |
| checkSuccess $? |
| |
| echo "Load encryption key at 80000001" |
| ${PREFIX}load -hp 80000000 -pwdp sto -ipr deepriv.bin -ipu deepub.bin > run.out |
| checkSuccess $? |
| |
| echo "RSA encrypt with the encryption key" |
| ${PREFIX}rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| checkSuccess $? |
| |
| echo "RSA decrypt with the decryption key" |
| ${PREFIX}rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin > run.out |
| checkSuccess $? |
| |
| echo "Verify the decrypt result" |
| tail -c 3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the encryption key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Primary RSA decryption key RSAES" |
| echo "" |
| |
| echo "Create Primary RSAES encryption key" |
| ${PREFIX}createprimary -hi p -dee -halg sha256 -opem tmppubkey.pem > run.out |
| checkSuccess $? |
| |
| echo "RSA encrypt with the encryption key" |
| ${PREFIX}rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| checkSuccess $? |
| |
| echo "RSA decrypt with the decryption key" |
| ${PREFIX}rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin > run.out |
| checkSuccess $? |
| |
| echo "Verify the decrypt result" |
| tail -c 3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the encryption key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Primary Create Loaded RSA decryption key RSAES" |
| echo "" |
| |
| echo "CreateLoaded primary key, storage parent 80000001" |
| ${PREFIX}createloaded -hp 40000001 -dee > run.out |
| checkSuccess $? |
| |
| echo "RSA encrypt with the encryption key" |
| ${PREFIX}rsaencrypt -hk 80000001 -id policies/aaa -oe enc.bin > run.out |
| checkSuccess $? |
| |
| echo "RSA decrypt with the decryption key" |
| ${PREFIX}rsadecrypt -hk 80000001 -ie enc.bin -od dec.bin > run.out |
| checkSuccess $? |
| |
| echo "Verify the decrypt result" |
| tail -c 3 dec.bin > tmp.bin |
| diff policies/aaa tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the encryption key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| # cleanup |
| |
| rm -f tmp.bin |
| rm -f enc.bin |
| rm -f dec.bin |
| rm -f deepriv.bin |
| rm -f deepub.bin |
| rm -f tmpmsg.bin |
| rm -f tmpdig.bin |
| rm -f tmpsig.bin |
| rm -f tmpkeypairrsa2048.der |
| rm -f tmpkeypairrsa2048.pem |
| rm -f tmpkeypairrsa3072.der |
| rm -f tmpkeypairrsa3072.pem |
| rm -f tmppubkey.bin |
| rm -f tmppubkey.pem |
| rm -f tmpprivkey.bin |
| |
| # ${PREFIX}getcapability -cap 1 -pr 80000000 |
| # ${PREFIX}getcapability -cap 1 -pr 02000000 |
| |
| # ${PREFIX}flushcontext -ha 80000001 |