| // SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later |
| /* |
| * Copyright 2020 Wistron Corp. |
| * Copyright 2017-2019 IBM Corp. |
| */ |
| |
| #include <skiboot.h> |
| #include <device.h> |
| #include <console.h> |
| #include <chip.h> |
| #include <ipmi.h> |
| #include <psi.h> |
| #include <npu-regs.h> |
| #include <secvar.h> |
| |
| #include "astbmc.h" |
| |
| ST_PLUGGABLE(mowgli_slot1, "Pcie Slot1"); |
| ST_PLUGGABLE(mowgli_builtin_SAS, "Builtin SAS"); |
| ST_BUILTIN_DEV(mowgli_builtin_bmc, "BMC"); |
| ST_PLUGGABLE(mowgli_builtin_ethernet, "Builtin Ethernet"); |
| ST_BUILTIN_DEV(mowgli_builtin_usb, "Builtin USB"); |
| |
| static const struct slot_table_entry mowgli_phb_table[] = { |
| ST_PHB_ENTRY(0, 0, mowgli_slot1), |
| ST_PHB_ENTRY(0, 1, mowgli_builtin_SAS), |
| ST_PHB_ENTRY(0, 2, mowgli_builtin_bmc), |
| ST_PHB_ENTRY(0, 3, mowgli_builtin_ethernet), |
| ST_PHB_ENTRY(0, 4, mowgli_builtin_usb), |
| |
| { .etype = st_end }, |
| }; |
| |
| /* |
| * HACK: Hostboot doesn't export the correct data for the system VPD EEPROM |
| * for this system. So we need to work around it here. |
| */ |
| static void vpd_dt_fixup(void) |
| { |
| struct dt_node *n = dt_find_by_path(dt_root, |
| "/xscom@603fc00000000/i2cm@a2000/i2c-bus@0/eeprom@50"); |
| |
| if (n) { |
| dt_check_del_prop(n, "compatible"); |
| dt_add_property_string(n, "compatible", "atmel,24c512"); |
| |
| dt_check_del_prop(n, "label"); |
| dt_add_property_string(n, "label", "system-vpd"); |
| } |
| } |
| |
| static void phb0_fixup(void) |
| { |
| struct dt_node *stk; |
| u32 phb_index; |
| |
| /* Limit PHB0/(pec0) to gen3 speed */ |
| dt_for_each_compatible(dt_root, stk, "ibm,power9-phb-stack") { |
| phb_index = dt_prop_get_u32_def(stk, "ibm,phb-index", -1); |
| if (phb_index == 0) { |
| dt_check_del_prop(stk, "ibm,max-link-speed"); |
| dt_add_property_cells(stk, "ibm,max-link-speed", 3); |
| } |
| } |
| } |
| |
| static bool mowgli_probe(void) |
| { |
| if (!dt_node_is_compatible(dt_root, "ibm,mowgli")) |
| return false; |
| |
| /* Lot of common early inits here */ |
| astbmc_early_init(); |
| |
| /* Setup UART for use by OPAL (Linux hvc) */ |
| uart_set_console_policy(UART_CONSOLE_OPAL); |
| |
| vpd_dt_fixup(); |
| |
| slot_table_init(mowgli_phb_table); |
| phb0_fixup(); |
| |
| return true; |
| } |
| static int mowgli_secvar_init(void) |
| { |
| return secvar_main(secboot_tpm_driver, edk2_compatible_v1); |
| } |
| |
| |
| DECLARE_PLATFORM(mowgli) = { |
| .name = "Mowgli", |
| .probe = mowgli_probe, |
| .init = astbmc_init, |
| .start_preload_resource = flash_start_preload_resource, |
| .resource_loaded = flash_resource_loaded, |
| .bmc = &bmc_plat_ast2500_openbmc, |
| .pci_get_slot_info = slot_table_get_slot_info, |
| .pci_probe_complete = check_all_slot_table, |
| .cec_power_down = astbmc_ipmi_power_down, |
| .cec_reboot = astbmc_ipmi_reboot, |
| .elog_commit = ipmi_elog_commit, |
| .exit = astbmc_exit, |
| .terminate = ipmi_terminate, |
| .op_display = op_display_lpc, |
| .secvar_init = mowgli_secvar_init, |
| }; |