| #!/bin/bash |
| # |
| |
| ################################################################################# |
| # # |
| # TPM2 regression test # |
| # Written by Ken Goldman # |
| # IBM Thomas J. Watson Research Center # |
| # # |
| # (c) Copyright IBM Corporation 2015 - 2020 # |
| # # |
| # All rights reserved. # |
| # # |
| # Redistribution and use in source and binary forms, with or without # |
| # modification, are permitted provided that the following conditions are # |
| # met: # |
| # # |
| # Redistributions of source code must retain the above copyright notice, # |
| # this list of conditions and the following disclaimer. # |
| # # |
| # Redistributions in binary form must reproduce the above copyright # |
| # notice, this list of conditions and the following disclaimer in the # |
| # documentation and/or other materials provided with the distribution. # |
| # # |
| # Neither the names of the IBM Corporation nor the names of its # |
| # contributors may be used to endorse or promote products derived from # |
| # this software without specific prior written permission. # |
| # # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # |
| # HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # |
| # # |
| ################################################################################# |
| |
| echo "" |
| echo "Keyed hash HMAC key" |
| echo "" |
| |
| echo "Start an HMAC auth session" |
| ${PREFIX}startauthsession -se h > run.out |
| checkSuccess $? |
| |
| # session 02000000 |
| # loaded HMAC key 80000001 |
| # primary HMAC key 80000001 |
| # sequence object 80000002 |
| |
| for HALG in ${ITERATE_ALGS} |
| do |
| |
| for SESS in "" "-se0 02000000 1" |
| do |
| |
| echo "Load the ${HALG} keyed hash key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr khpriv${HALG}.bin -ipu khpub${HALG}.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "HMAC ${HALG} using the keyed hash key, message from file ${SESS}" |
| ${PREFIX}hmac -hk 80000001 -if msg.bin -os sig.bin -pwdk khk -halg ${HALG} ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "HMAC ${HALG} start using the keyed hash key ${SESS}" |
| ${PREFIX}hmacstart -hk 80000001 -pwdk khk -pwda aaa ${SESS} -halg ${HALG} > run.out |
| checkSuccess $? |
| |
| echo "HMAC ${HALG} sequence update ${SESS}" |
| ${PREFIX}sequenceupdate -hs 80000002 -pwds aaa -if msg.bin ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "HMAC ${HALG} sequence complete ${SESS}" |
| ${PREFIX}sequencecomplete -hs 80000002 -pwds aaa -of tmp.bin ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Verify the HMAC ${HALG} using the two methods" |
| diff sig.bin tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "HMAC ${HALG} using the keyed hash key, message from command line ${SESS}" |
| ${PREFIX}hmac -hk 80000001 -ic 1234567890123456 -os sig.bin -pwdk khk -halg ${HALG} ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Verify the HMAC ${HALG} using the two methods" |
| diff sig.bin tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the ${HALG} HMAC key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Create primary HMAC key - $HALG" |
| ${PREFIX}createprimary -kh -halg ${HALG} -pwdk khp > run.out |
| checkSuccess $? |
| |
| echo "HMAC ${HALG} using the keyed hash primary key ${SESS}" |
| ${PREFIX}hmac -hk 80000001 -if msg.bin -os sig.bin -pwdk khp -halg ${HALG} ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "HMAC ${HALG} start using the keyed hash primary key ${SESS}" |
| ${PREFIX}hmacstart -hk 80000001 -pwdk khp -pwda aaa ${SESS} -halg ${HALG} > run.out |
| checkSuccess $? |
| |
| echo "HMAC ${HALG} sequence update ${SESS}" |
| ${PREFIX}sequenceupdate -hs 80000002 -pwds aaa -if msg.bin ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "HMAC ${HALG} sequence complete ${SESS}" |
| ${PREFIX}sequencecomplete -hs 80000002 -pwds aaa -of tmp.bin ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Verify the HMAC ${HALG} using the two methods" |
| diff sig.bin tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the ${HALG} primary HMAC key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| done |
| done |
| |
| echo "" |
| echo "Hash" |
| echo "" |
| |
| for HALG in ${ITERATE_ALGS} |
| do |
| |
| for SESS in "" "-se0 02000000 1" |
| do |
| |
| echo "Hash ${HALG} in one call, data from file" |
| ${PREFIX}hash -hi p -halg ${HALG} -if policies/aaa -oh tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Verify the hash ${HALG}" |
| diff tmp.bin policies/${HALG}aaa.bin > run.out |
| checkSuccess $? |
| |
| echo "Hash ${HALG} in one call, data on command line" |
| ${PREFIX}hash -hi p -halg ${HALG} -ic aaa -oh tmp.bin > run.out |
| checkSuccess $? |
| |
| echo "Verify the hash ${HALG}" |
| diff tmp.bin policies/${HALG}aaa.bin > run.out |
| checkSuccess $? |
| |
| echo "Hash ${HALG} sequence start" |
| ${PREFIX}hashsequencestart -halg ${HALG} -pwda aaa > run.out |
| checkSuccess $? |
| |
| echo "Hash ${HALG} sequence update ${SESS}" |
| ${PREFIX}sequenceupdate -hs 80000001 -pwds aaa -if policies/aaa ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Hash ${HALG} sequence complete ${SESS}" |
| ${PREFIX}sequencecomplete -hi p -hs 80000001 -pwds aaa -of tmp.bin ${SESS} > run.out |
| checkSuccess $? |
| |
| echo "Verify the ${HALG} hash" |
| diff tmp.bin policies/${HALG}aaa.bin > run.out |
| checkSuccess $? |
| |
| done |
| done |
| |
| echo "Flush the auth session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| # ${PREFIX}getcapability -cap 1 -pr 80000000 |
| # ${PREFIX}getcapability -cap 1 -pr 02000000 |
| |
| echo "" |
| echo "Sign with ticket" |
| echo "" |
| |
| echo "Load the signing key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr signrsa2048rpriv.bin -ipu signrsa2048rpub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Hash and create ticket" |
| ${PREFIX}hash -hi p -halg sha256 -if msg.bin -oh sig.bin -tk tkt.bin > run.out |
| checkSuccess $? |
| |
| echo "Sign a digest with a restricted signing key and no ticket - should fail" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -os sig.bin -pwdk sig > run.out |
| checkFailure $? |
| |
| echo "Sign a digest with a restricted signing key and ticket" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -tk tkt.bin -os sig.bin -pwdk sig > run.out |
| checkSuccess $? |
| |
| echo "Hash and create null ticket, msg with TPM_GENERATED" |
| ${PREFIX}hash -hi p -halg sha256 -if policies/msgtpmgen.bin -oh sig.bin -tk tkt.bin > run.out |
| checkSuccess $? |
| |
| echo "Sign a digest with a restricted signing key and ticket - should fail" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -tk tkt.bin -os sig.bin -pwdk sig > run.out |
| checkFailure $? |
| |
| echo "Hash sequence start" |
| ${PREFIX}hashsequencestart -halg sha256 -pwda aaa > run.out |
| checkSuccess $? |
| |
| echo "Hash sequence update " |
| ${PREFIX}sequenceupdate -hs 80000002 -pwds aaa -if msg.bin > run.out |
| checkSuccess $? |
| |
| echo "Hash sequence complete" |
| ${PREFIX}sequencecomplete -hi p -hs 80000002 -pwds aaa -of tmp.bin -tk tkt.bin > run.out |
| checkSuccess $? |
| |
| echo "Sign a digest with a restricted signing key and no ticket - should fail" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -os sig.bin -pwdk sig > run.out |
| checkFailure $? |
| |
| echo "Sign a digest with a restricted signing key and ticket" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -tk tkt.bin -os sig.bin -pwdk sig > run.out |
| checkSuccess $? |
| |
| echo "Hash sequence start" |
| ${PREFIX}hashsequencestart -halg sha256 -pwda aaa -halg sha256 > run.out |
| checkSuccess $? |
| |
| echo "Hash sequence update, msg with TPM_GENERATED" |
| ${PREFIX}sequenceupdate -hs 80000002 -pwds aaa -if policies/msgtpmgen.bin > run.out |
| checkSuccess $? |
| |
| echo "Hash sequence complete" |
| ${PREFIX}sequencecomplete -hi p -hs 80000002 -pwds aaa -of tmp.bin -tk tkt.bin > run.out |
| checkSuccess $? |
| |
| echo "Sign a digest with a restricted signing key and ticket - should fail" |
| ${PREFIX}sign -hk 80000001 -halg sha256 -if msg.bin -tk tkt.bin -os sig.bin -pwdk sig > run.out |
| checkFailure $? |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| rm -f tmp.bin |
| rm -f tmp1.bin |
| |
| # ${PREFIX}getcapability -cap 1 -pr 80000000 |
| # ${PREFIX}getcapability -cap 1 -pr 02000000 |
| |
