blob: 160d9f2235d52f5d70638d02356f94389b283787 [file] [log] [blame]
#!/bin/bash
#
#################################################################################
# #
# TPM2 regression test #
# Written by Ken Goldman #
# IBM Thomas J. Watson Research Center #
# #
# (c) Copyright IBM Corporation 2015 - 2020 #
# #
# All rights reserved. #
# #
# Redistribution and use in source and binary forms, with or without #
# modification, are permitted provided that the following conditions are #
# met: #
# #
# Redistributions of source code must retain the above copyright notice, #
# this list of conditions and the following disclaimer. #
# #
# Redistributions in binary form must reproduce the above copyright #
# notice, this list of conditions and the following disclaimer in the #
# documentation and/or other materials provided with the distribution. #
# #
# Neither the names of the IBM Corporation nor the names of its #
# contributors may be used to endorse or promote products derived from #
# this software without specific prior written permission. #
# #
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #
# #
#################################################################################
TWOAUTH0=(01 01 01 01 21 21 41 41 61)
TWOAUTH1=(01 21 41 61 01 41 01 21 01)
THREEAUTH0=(01 01 01 01 01 21 41)
THREEAUTH1=(01 01 01 21 41 01 01)
THREEAUTH2=(21 41 61 41 21 41 21)
echo ""
echo "Parameter Encryption - Basic"
echo ""
echo "Load the signing key under the primary key"
${PREFIX}load -hp 80000000 -ipr signrsa2048priv.bin -ipu signrsa2048pub.bin -pwdp sto > run.out
checkSuccess $?
for MODE0 in xor aes
do
for MODE1 in xor aes
do
for MODE2 in xor aes
do
echo "Start an HMAC auth session with $MODE0 encryption"
${PREFIX}startauthsession -se h -sym $MODE0 > run.out
checkSuccess $?
echo "Start an HMAC auth session with $MODE1 encryption"
${PREFIX}startauthsession -se h -sym $MODE1 > run.out
checkSuccess $?
echo "Start an HMAC auth session with $MODE2 encryption"
${PREFIX}startauthsession -se h -sym $MODE2 > run.out
checkSuccess $?
# one auth
for AUTH0 in 21 41 61
do
echo "Signing Key Self Certify, one auth $AUTH0"
${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 $AUTH0 > run.out
checkSuccess $?
done
# two auth
for ((i = 0 ; i < 9; i++))
do
echo "Signing Key Self Certify, two auth ${TWOAUTH0[i]} ${TWOAUTH1[i]}"
${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${TWOAUTH0[i]} -se1 02000001 ${TWOAUTH1[i]} > run.out
checkSuccess $?
done
# three auth
for ((i = 0 ; i < 7; i++))
do
echo "Signing Key Self Certify, three auth ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}"
${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 02000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out
checkSuccess $?
done
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000000 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000001 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000002 > run.out
checkSuccess $?
done
done
done
echo "Flush the signing key"
${PREFIX}flushcontext -ha 80000001 > run.out
checkSuccess $?
echo "Create a signing key, policy command code certify"
${PREFIX}create -hp 80000000 -si -kt f -kt p -opr tmppriv.bin -opu tmppub.bin -pwdp sto -pwdk sig -pol policies/policycccertify.bin > run.out
checkSuccess $?
echo ""
echo "Salt encrypt and decrypt HMAC sessions"
echo ""
echo "Load the signing key under the primary key"
${PREFIX}load -hp 80000000 -ipr signrsa2048priv.bin -ipu signrsa2048pub.bin -pwdp sto > run.out
checkSuccess $?
echo "Start an auth session"
${PREFIX}startauthsession -se h -hs 80000000 > run.out
checkSuccess $?
echo "Start an auth session"
${PREFIX}startauthsession -se h -hs 80000000 > run.out
checkSuccess $?
echo "Start an encrypt session"
${PREFIX}startauthsession -se h -hs 80000000 > run.out
checkSuccess $?
for ((i = 0 ; i < 7 ; i++))
do
echo "Signing Key Self Certify, three auth, salted parameter encryption ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}"
${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 02000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out
checkSuccess $?
done
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000000 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000001 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000002 > run.out
checkSuccess $?
echo "Flush the signing key"
${PREFIX}flushcontext -ha 80000001 > run.out
checkSuccess $?
echo ""
echo "Bind encrypt and decrypt HMAC sessions"
echo ""
echo "Load the signing key under the primary key"
${PREFIX}load -hp 80000000 -ipr signrsa2048priv.bin -ipu signrsa2048pub.bin -pwdp sto > run.out
checkSuccess $?
echo "Start an auth session"
${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out
checkSuccess $?
echo "Start an auth session"
${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out
checkSuccess $?
echo "Start an encrypt session"
${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out
checkSuccess $?
for ((i = 0 ; i < 7 ; i++))
do
echo "Signing Key Self Certify, three auth, bind parameter encryption ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}"
${PREFIX}certify -hk 80000001 -ho 80000001 -pwdk sig -pwdo sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 02000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out
checkSuccess $?
done
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000000 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000001 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000002 > run.out
checkSuccess $?
echo "Flush the signing key"
${PREFIX}flushcontext -ha 80000001 > run.out
checkSuccess $?
# policycccertify.txt 0000016c00000148
# policymaker -if policies/policycccertify.txt -of policies/policycccertify.bin -v -pr
# 04 8e 9a 3a ce 08 58 3f 79 f3 44 ff 78 5b be a9
# f0 7a c7 fa 33 25 b3 d4 9a 21 dd 51 94 c6 58 50
echo ""
echo "Salt encrypt and decrypt policy sessions"
echo ""
echo "Load the signing key under the primary key"
${PREFIX}load -hp 80000000 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto > run.out
checkSuccess $?
echo "Start an auth session"
${PREFIX}startauthsession -se h -hs 80000000 > run.out
checkSuccess $?
echo "Start a policy session"
${PREFIX}startauthsession -se p -hs 80000000 > run.out
checkSuccess $?
echo "Start an encrypt session"
${PREFIX}startauthsession -se h -hs 80000000 > run.out
checkSuccess $?
for ((i = 0 ; i < 7 ; i++))
do
echo "Policy restart"
${PREFIX}policyrestart -ha 03000001 > run.out
checkSuccess $?
echo "Policy command code - certify"
${PREFIX}policycommandcode -ha 03000001 -cc 148 > run.out
checkSuccess $?
echo "Signing Key Self Certify, three auth, salted parameter encryption ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}"
${PREFIX}certify -hk 80000001 -ho 80000001 -pwdo sig -pwdk sig -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 03000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out
checkSuccess $?
done
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000000 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 03000001 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000002 > run.out
checkSuccess $?
echo "Flush the signing key"
${PREFIX}flushcontext -ha 80000001 > run.out
checkSuccess $?
echo ""
echo "Bind encrypt and decrypt policy sessions"
echo ""
echo "Load the signing key under the primary key"
${PREFIX}load -hp 80000000 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto > run.out
checkSuccess $?
echo "Start an auth session"
${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out
checkSuccess $?
echo "Start a policy session"
${PREFIX}startauthsession -se p -bi 80000001 -pwdb sig > run.out
checkSuccess $?
echo "Start an encrypt session"
${PREFIX}startauthsession -se h -bi 80000001 -pwdb sig > run.out
checkSuccess $?
for ((i = 0 ; i < 7 ; i++))
do
echo "Policy restart"
${PREFIX}policyrestart -ha 03000001 > run.out
checkSuccess $?
echo "Policy command code - certify"
${PREFIX}policycommandcode -ha 03000001 -cc 148 > run.out
checkSuccess $?
echo "Signing Key Self Certify, three auth, bind parameter encryption ${THREEAUTH0[i]} ${THREEAUTH1[i]} ${THREEAUTH2[i]}"
${PREFIX}certify -hk 80000001 -ho 80000001 -pwdo sig -pwdk xxx -qd policies/aaa -os sig.bin -oa tmp.bin -se0 02000000 ${THREEAUTH0[i]} -se1 03000001 ${THREEAUTH1[i]} -se2 02000002 ${THREEAUTH2[i]} > run.out
checkSuccess $?
done
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000000 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 03000001 > run.out
checkSuccess $?
echo "Flush the sessions"
${PREFIX}flushcontext -ha 02000002 > run.out
checkSuccess $?
echo "Flush the signing key"
${PREFIX}flushcontext -ha 80000001 > run.out
checkSuccess $?
# getcapability -cap 1 -pr 80000000
# getcapability -cap 1 -pr 02000000