| #!/bin/bash |
| # |
| |
| ################################################################################# |
| # # |
| # TPM2 regression test # |
| # Written by Ken Goldman # |
| # IBM Thomas J. Watson Research Center # |
| # $Id: testbind.sh 1277 2018-07-23 20:30:23Z kgoldman $ # |
| # # |
| # (c) Copyright IBM Corporation 2015 - 2018 # |
| # # |
| # All rights reserved. # |
| # # |
| # Redistribution and use in source and binary forms, with or without # |
| # modification, are permitted provided that the following conditions are # |
| # met: # |
| # # |
| # Redistributions of source code must retain the above copyright notice, # |
| # this list of conditions and the following disclaimer. # |
| # # |
| # Redistributions in binary form must reproduce the above copyright # |
| # notice, this list of conditions and the following disclaimer in the # |
| # documentation and/or other materials provided with the distribution. # |
| # # |
| # Neither the names of the IBM Corporation nor the names of its # |
| # contributors may be used to endorse or promote products derived from # |
| # this software without specific prior written permission. # |
| # # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # |
| # HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # |
| # # |
| ################################################################################# |
| |
| echo "" |
| echo "Bind session" |
| echo "" |
| |
| echo "" |
| echo "Bind session to Primary Key" |
| echo "" |
| |
| echo "Bind session bound to primary key at 80000000" |
| ${PREFIX}startauthsession -se h -bi 80000000 -pwdb sto > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using that bind session, same object 80000000" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdp sto -pwdk 222 -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using that bind session, same object 80000000, wrong password does not matter" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdp xxx -pwdk 222 -se0 02000000 0 > run.out |
| checkSuccess $? |
| |
| echo "Create second primary key with different password 000 and Name" |
| ${PREFIX}createprimary -hi o -pwdk 000 > run.out |
| checkSuccess $? |
| |
| echo "Bind session bound to second primary key at 80000001, correct password" |
| ${PREFIX}startauthsession -se h -bi 80000001 -pwdb 000 > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using that bind session, different object 80000000" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdp sto -pwdk 222 -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using that bind session, different object 80000000, wrong password - should fail" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdp xxx -pwdk 222 -se0 02000000 1 > run.out |
| checkFailure $? |
| |
| echo "Flush the session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "Bind session bound to primary key at 80000000, wrong password" |
| ${PREFIX}startauthsession -se h -bi 80000000 -pwdb xxx > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using that bind session, same object 80000000 - should fail" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdp sto -pwdk 222 -se0 02000000 0 > run.out |
| checkFailure $? |
| |
| echo "Flush the failing session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "Flush the second primary key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Bind session to Hierarchy" |
| echo "" |
| |
| echo "Change platform hierarchy auth" |
| ${PREFIX}hierarchychangeauth -hi p -pwdn ppp > run.out |
| checkSuccess $? |
| |
| echo "Bind session bound to platform hierarchy" |
| ${PREFIX}startauthsession -se h -bi 4000000c -pwdb ppp > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using that bind session, wrong password - should fail" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdp xxx -pwdk 222 -se0 02000000 0 > run.out |
| checkFailure $? |
| |
| echo "Create storage key using that bind session" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdp sto -pwdk 222 -se0 02000000 0 > run.out |
| checkSuccess $? |
| |
| echo "Bind session bound to platform hierarchy, wrong password" |
| ${PREFIX}startauthsession -se h -bi 4000000c -pwdb xxx > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using that bind session - should fail" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdp sto -pwdk 222 -se0 02000000 0 > run.out |
| checkFailure $? |
| |
| echo "Change platform hierarchy auth back to null" |
| ${PREFIX}hierarchychangeauth -hi p -pwda ppp > run.out |
| checkSuccess $? |
| |
| echo "Flush the session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Bind session to NV" |
| echo "" |
| |
| echo "NV Undefine Space" |
| ${PREFIX}nvundefinespace -hi o -ha 01000000 > run.out |
| |
| echo "NV Define Space" |
| ${PREFIX}nvdefinespace -hi o -ha 01000000 -pwdn nnn -sz 3 > run.out |
| checkSuccess $? |
| |
| echo "NV Read Public, unwritten Name" |
| ${PREFIX}nvreadpublic -ha 01000000 > run.out |
| checkSuccess $? |
| |
| echo "Bind session bound to unwritten NV index at 01000000" |
| ${PREFIX}startauthsession -se h -bi 01000000 -pwdb nnn > run.out |
| checkSuccess $? |
| |
| echo "NV write HMAC using bind session to set written" |
| ${PREFIX}nvwrite -ha 01000000 -pwdn nnn -ic 123 -se0 02000000 0 > run.out |
| checkSuccess $? |
| |
| echo "Bind session bound to written NV index at 01000000" |
| ${PREFIX}startauthsession -se h -bi 01000000 -pwdb nnn > run.out |
| checkSuccess $? |
| |
| echo "NV Write HMAC using bind session" |
| ${PREFIX}nvwrite -ha 01000000 -pwdn nnn -ic 123 -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "NV Read HMAC using bind session" |
| ${PREFIX}nvread -ha 01000000 -pwdn nnn -sz 3 -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "NV Read HMAC using bind session, wrong password does not matter" |
| ${PREFIX}nvread -ha 01000000 -pwdn xxx -sz 3 -se0 02000000 1 > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using that bind session" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdp sto -pwdk 222 -se0 02000000 0 > run.out |
| checkSuccess $? |
| |
| echo "NV Undefine Space" |
| ${PREFIX}nvundefinespace -hi o -ha 01000000 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "Encrypt with bind to same object" |
| echo "" |
| |
| for MODE0 in xor aes |
| |
| do |
| |
| echo "Start an HMAC auth session with $MODE0 encryption and bind to primary key at 80000000" |
| ${PREFIX}startauthsession -se h -sym $MODE0 -bi 80000000 -pwdb sto > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using bind session, same object, wrong password" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdk 222 -pwdp xxx -opr tmppriv.bin -opu tmppub.bin -se0 02000000 61 > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using bind session, same object 80000000" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdk 222 -opr tmppriv.bin -opu tmppub.bin -se0 02000000 61 > run.out |
| checkSuccess $? |
| |
| echo "Load the key, with $MODE0 encryption" |
| ${PREFIX}load -hp 80000000 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto -se0 02000000 61 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sealed object" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the $MODE0 session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "" |
| echo "Encrypt with bind to different object" |
| echo "" |
| |
| for MODE0 in xor aes |
| |
| do |
| |
| echo "Start an HMAC auth session with $MODE0 encryption and bind to platform auth" |
| ${PREFIX}startauthsession -se h -sym $MODE0 -bi 4000000c > run.out |
| checkSuccess $? |
| |
| echo "Create storage key using bind session, different object, wrong password, should fail" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdk 222 -pwdp xxx -opr tmppriv.bin -opu tmppub.bin -se0 02000000 61 > run.out |
| checkFailure $? |
| |
| echo "Create storage key using bind session, different object" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -pwdk 222 -pwdp sto -opr tmppriv.bin -opu tmppub.bin -se0 02000000 61 > run.out |
| checkSuccess $? |
| |
| echo "Load the key, with $MODE0 encryption" |
| ${PREFIX}load -hp 80000000 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto -se0 02000000 61 > run.out |
| checkSuccess $? |
| |
| echo "Flush the sealed object" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the $MODE0 session" |
| ${PREFIX}flushcontext -ha 02000000 > run.out |
| checkSuccess $? |
| |
| done |
| |
| echo "" |
| echo "PolicyAuthValue and bind to different object, command encryption" |
| echo "" |
| |
| echo "Create a signing key under the primary key - policy command code - sign, auth" |
| ${PREFIX}create -hp 80000000 -si -kt f -kt p -opr tmppriv.bin -opu tmppub.bin -pwdp sto -pwdk sig -pol policies/policyccsign-auth.bin > run.out |
| checkSuccess $? |
| |
| echo "Load the signing key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Start a policy session, bind to primary key" |
| ${PREFIX}startauthsession -se p -bi 80000000 -pwdb sto > run.out |
| checkSuccess $? |
| |
| echo "Policy command code - sign" |
| ${PREFIX}policycommandcode -ha 03000000 -cc 15d > run.out |
| checkSuccess $? |
| |
| echo "Policy authvalue" |
| ${PREFIX}policyauthvalue -ha 03000000 > run.out |
| checkSuccess $? |
| |
| echo "Sign a digest - policy, command encrypt" |
| ${PREFIX}sign -hk 80000001 -if policies/aaa -os sig.bin -ipu tmppub.bin -se0 03000000 21 -pwdk sig > run.out |
| checkSuccess $? |
| |
| echo "Verify the signature" |
| ${PREFIX}verifysignature -hk 80000001 -if policies/aaa -is sig.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the session" |
| ${PREFIX}flushcontext -ha 03000000 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "PolicyAuthValue and bind to same object, command encryption" |
| echo "" |
| |
| echo "Create a signing key under the primary key - policy command code - sign, auth" |
| ${PREFIX}create -hp 80000000 -si -kt f -kt p -opr tmppriv.bin -opu tmppub.bin -pwdp sto -pwdk sig -pol policies/policyccsign-auth.bin > run.out |
| checkSuccess $? |
| |
| echo "Load the signing key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Start a policy session" |
| ${PREFIX}startauthsession -se p -bi 80000001 -pwdb sig > run.out |
| checkSuccess $? |
| |
| echo "Policy command code - sign" |
| ${PREFIX}policycommandcode -ha 03000000 -cc 15d > run.out |
| checkSuccess $? |
| |
| echo "Policy authvalue" |
| ${PREFIX}policyauthvalue -ha 03000000 > run.out |
| checkSuccess $? |
| |
| echo "Sign a digest - policy, command encrypt" |
| ${PREFIX}sign -hk 80000001 -if policies/aaa -os sig.bin -ipu tmppub.bin -se0 03000000 21 -pwdk sig > run.out |
| checkSuccess $? |
| |
| echo "Verify the signature" |
| ${PREFIX}verifysignature -hk 80000001 -if policies/aaa -is sig.bin > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the session" |
| ${PREFIX}flushcontext -ha 03000000 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "PolicyAuthValue and bind to different object, response encryption" |
| echo "" |
| |
| #intermediate policy digest length 32 |
| # 54 a0 de 17 1d 03 c6 9b 17 b3 61 22 33 a5 e8 b2 |
| # d8 ee e0 87 f9 c6 ea 85 8c 9c 2e 51 05 52 8b 14 |
| # policy |
| # 4b 50 04 f7 3f 2e f8 c0 96 c9 18 d0 bc 18 0e 6b |
| # 49 0c 8a ed 14 bb 8f 86 fc 5a 54 ef 0c d3 90 44 |
| |
| echo "Create a storage key under the primary key - policy command code - create, auth" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -opr tmpspriv.bin -opu tmpspub.bin -pwdp sto -pwdk sto -pol policies/policycccreate-auth.bin > run.out |
| checkSuccess $? |
| |
| echo "Load the storage key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr tmpspriv.bin -ipu tmpspub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Start a policy session, bind to primary key" |
| ${PREFIX}startauthsession -se p -bi 80000000 -pwdb sto > run.out |
| checkSuccess $? |
| |
| echo "Policy command code - create" |
| ${PREFIX}policycommandcode -ha 03000000 -cc 153 > run.out |
| checkSuccess $? |
| |
| echo "Policy authvalue" |
| ${PREFIX}policyauthvalue -ha 03000000 > run.out |
| checkSuccess $? |
| |
| echo "Create a signing key with response encryption" |
| ${PREFIX}create -hp 80000001 -si -kt f -kt p -opr tmppriv.bin -opu tmppub.bin -pwdp sto -pwdk sig -se0 03000000 41 > run.out |
| checkSuccess $? |
| |
| echo "Load the signing key to verify response encryption" |
| ${PREFIX}load -hp 80000001 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Flush the storage key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| |
| echo "Flush the session" |
| ${PREFIX}flushcontext -ha 03000000 > run.out |
| checkSuccess $? |
| |
| echo "" |
| echo "PolicyAuthValue and bind to same object, response encryption" |
| echo "" |
| |
| echo "Create a storage key under the primary key - policy command code - create, auth" |
| ${PREFIX}create -hp 80000000 -st -kt f -kt p -opr tmpspriv.bin -opu tmpspub.bin -pwdp sto -pwdk sto -pol policies/policycccreate-auth.bin > run.out |
| checkSuccess $? |
| |
| echo "Load the storage key under the primary key" |
| ${PREFIX}load -hp 80000000 -ipr tmpspriv.bin -ipu tmpspub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Start a policy session, bind to storage key" |
| ${PREFIX}startauthsession -se p -bi 80000001 -pwdb sto > run.out |
| checkSuccess $? |
| |
| echo "Policy command code - create" |
| ${PREFIX}policycommandcode -ha 03000000 -cc 153 > run.out |
| checkSuccess $? |
| |
| echo "Policy authvalue" |
| ${PREFIX}policyauthvalue -ha 03000000 > run.out |
| checkSuccess $? |
| |
| echo "Create a signing key with response encryption" |
| ${PREFIX}create -hp 80000001 -si -kt f -kt p -opr tmppriv.bin -opu tmppub.bin -pwdp sto -pwdk sig -se0 03000000 41 > run.out |
| checkSuccess $? |
| |
| echo "Load the signing key to verify response encryption" |
| ${PREFIX}load -hp 80000001 -ipr tmppriv.bin -ipu tmppub.bin -pwdp sto > run.out |
| checkSuccess $? |
| |
| echo "Flush the storage key" |
| ${PREFIX}flushcontext -ha 80000001 > run.out |
| checkSuccess $? |
| |
| echo "Flush the signing key" |
| ${PREFIX}flushcontext -ha 80000002 > run.out |
| checkSuccess $? |
| |
| echo "Flush the session" |
| ${PREFIX}flushcontext -ha 03000000 > run.out |
| checkSuccess $? |
| |
| # ${PREFIX}getcapability -cap 1 -pr 80000000 |
| # ${PREFIX}getcapability -cap 1 -pr 02000000 |