blob: b2d1fa688995476b8ecf79bcd5cfc13944647191 [file] [log] [blame]
.. _skiboot-5.1.20:
skiboot-5.1.20
--------------
skiboot-5.1.20 was released on Friday 18th August 2017.
skiboot-5.1.20 is the 21st stable release of 5.1, it follows skiboot-5.1.19
(which was released 16th January 2017).
This release contains a few minor bug fixes backported to the 5.1.x series.
All of the fixes have previously appeared in the 5.4.x stable series.
Changes are:
- FSP/CONSOLE: Workaround for unresponsive ipmi daemon
In some corner cases, where FSP is active but not responding to
console MBOX message (due to buggy IPMI) and we have heavy console
write happening from kernel, then eventually our console buffer
becomes full. At this point OPAL starts sending OPAL_BUSY_EVENT to
kernel. Kernel will keep on retrying. This is creating kernel soft
lockups. In some extreme case when every CPU is trying to write to
console, user will not be able to ssh and thinks system is hang.
If we reset FSP or restart IPMI daemon on FSP, system recovers and
everything becomes normal.
This patch adds workaround to above issue by returning OPAL_HARDWARE
when cosole is full. Side effect of this patch is, we may endup dropping
latest console data. But better to drop console data than system hang.
Alternative approach is to drop old data from console buffer, make space
for new data. But in normal condition only FSP can update 'next_out'
pointer and if we touch that pointer, it may introduce some other
race conditions. Hence we decided to just new console write request.
- FSP: Set status field in response message for timed out message
For timed out FSP messages, we set message status as "fsp_msg_timeout".
But most FSP driver users (like surviellance) are ignoring this field.
They always look for FSP returned status value in callback function
(second byte in word1). So we endup treating timed out message as success
response from FSP.
Sample output: ::
[69902.432509048,7] SURV: Sending the heartbeat command to FSP
[70023.226860117,4] FSP: Response from FSP timed out, word0 = d66a00d7, word1 = 0 state: 3
....
[70023.226901445,7] SURV: Received heartbeat acknowledge from FSP
[70023.226903251,3] FSP: fsp_trigger_reset() entry
Here SURV code thought it got valid response from FSP. But actually we didn't
receive response from FSP.
- FSP: Improve timeout message
Presently we print word0 and word1 in error log. word0 contains
sequence number and command class. One has to understand word0
format to identify command class.
Lets explicitly print command class, sub command etc.
- FSP/RTC: Remove local fsp_in_reset variable
Now that we are using fsp_in_rr() to detect FSP reset/reload, fsp_in_reset
become redundant. Lets remove this local variable.
- FSP/RTC: Fix possible FSP R/R issue in rtc write path
fsp_opal_rtc_write() checks FSP status before queueing message to FSP. But if
FSP R/R starts before getting response to queued message then we will continue
to return OPAL_BUSY_EVENT to host. In some extreme condition host may
experience hang. Once FSP is back we will repost message, get response from FSP
and return OPAL_SUCCESS to host.
This patch caches new values and returns OPAL_SUCCESS if FSP R/R is happening.
And once FSP is back we will send cached value to FSP.
- hw/fsp/rtc: read/write cached rtc tod on fsp hir.
Currently fsp-rtc reads/writes the cached RTC TOD on an fsp
reset. Use latest fsp_in_rr() function to properly read the cached rtc
value when fsp reset initiated by the hir.
Below is the kernel trace when we set hw clock, when hir process starts. ::
[ 1727.775824] NMI watchdog: BUG: soft lockup - CPU#57 stuck for 23s! [hwclock:7688]
[ 1727.775856] Modules linked in: vmx_crypto ibmpowernv ipmi_powernv uio_pdrv_genirq ipmi_devintf powernv_op_panel uio ipmi_msghandler powernv_rng leds_powernv ip_tables x_tables autofs4 ses enclosure scsi_transport_sas crc32c_vpmsum lpfc ipr tg3 scsi_transport_fc
[ 1727.775883] CPU: 57 PID: 7688 Comm: hwclock Not tainted 4.10.0-14-generic #16-Ubuntu
[ 1727.775883] task: c000000fdfdc8400 task.stack: c000000fdfef4000
[ 1727.775884] NIP: c00000000090540c LR: c0000000000846f4 CTR: 000000003006dd70
[ 1727.775885] REGS: c000000fdfef79a0 TRAP: 0901 Not tainted (4.10.0-14-generic)
[ 1727.775886] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>
[ 1727.775889] CR: 28024442 XER: 20000000
[ 1727.775890] CFAR: c00000000008472c SOFTE: 1
GPR00: 0000000030005128 c000000fdfef7c20 c00000000144c900 fffffffffffffff4
GPR04: 0000000028024442 c00000000090540c 9000000000009033 0000000000000000
GPR08: 0000000000000000 0000000031fc4000 c000000000084710 9000000000001003
GPR12: c0000000000846e8 c00000000fba0100
[ 1727.775897] NIP [c00000000090540c] opal_set_rtc_time+0x4c/0xb0
[ 1727.775899] LR [c0000000000846f4] opal_return+0xc/0x48
[ 1727.775899] Call Trace:
[ 1727.775900] [c000000fdfef7c20] [c00000000090540c] opal_set_rtc_time+0x4c/0xb0 (unreliable)
[ 1727.775901] [c000000fdfef7c60] [c000000000900828] rtc_set_time+0xb8/0x1b0
[ 1727.775903] [c000000fdfef7ca0] [c000000000902364] rtc_dev_ioctl+0x454/0x630
[ 1727.775904] [c000000fdfef7d40] [c00000000035b1f4] do_vfs_ioctl+0xd4/0x8c0
[ 1727.775906] [c000000fdfef7de0] [c00000000035bab4] SyS_ioctl+0xd4/0xf0
[ 1727.775907] [c000000fdfef7e30] [c00000000000b184] system_call+0x38/0xe0
[ 1727.775908] Instruction dump:
[ 1727.775909] f821ffc1 39200000 7c832378 91210028 38a10020 39200000 38810028 f9210020
[ 1727.775911] 4bfffe6d e8810020 80610028 4b77f61d <60000000> 7c7f1b78 3860000a 2fbffff4
This is found when executing the `op-test-framework fspresetReload testcase <https://github.com/open-power/op-test-framework/blob/master/testcases/fspresetReload.py>`_
With this fix ran fsp hir torture testcase in the above test
which is working fine.
- FSP/CHIPTOD: Return false in error path
- On FSP platforms: notify FSP of Platform Log ID after Host Initiated Reset Reload
Trigging a Host Initiated Reset (when the host detects the FSP has gone
out to lunch and should be rebooted), would cause "Unknown Command" messages
to appear in the OPAL log.
This patch implements those messages.
Log showing unknown command: ::
/ # cat /sys/firmware/opal/msglog | grep -i ,3
[ 110.232114723,3] FSP: fsp_trigger_reset() entry
[ 188.431793837,3] FSP #0: Link down, starting R&R
[ 464.109239162,3] FSP #0: Got XUP with no pending message !
[ 466.340598554,3] FSP-DPO: Unknown command 0xce0900
[ 466.340600126,3] FSP: Unhandled message ce0900
- hw/i2c: Fix early lock drop
When interacting with an I2C master the p8-i2c driver (common to p9)
aquires a per-master lock which it holds for the duration of it's
interaction with the master. Unfortunately, when
p8_i2c_check_initial_status() detects that the master is busy with
another transaction it drops the lock and returns OPAL_BUSY. This is
contrary to the driver's locking strategy which requires that the
caller aquire and drop the lock. This leads to a crash due to the
double unlock(), which skiboot treats as fatal.
- head.S: store all of LR and CTR
When saving the CTR and LR registers the skiboot exception handlers use the
'stw' instruction which only saves the lower 32 bits of the register. Given
these are both 64 bit registers this leads to some strange register dumps,
for example: ::
***********************************************
Unexpected exception 200 !
SRR0 : 0000000030016968 SRR1 : 9000000000201000
HSRR0: 0000000000000180 HSRR1: 9000000000001000
LR : 3003438830823f50 CTR : 3003438800000018
CFAR : 00000000300168fc
CR : 40004208 XER: 00000000
In this dump the upper 32 bits of LR and CTR are actually stack gunk
which obscures the underlying issue.
- hw/fsp: Do not queue SP and SPCN class messages during reset/reload
In certain cases of communicating with the FSP (e.g. sensors), the OPAL FSP
driver returns a default code (async
completion) even though there is no known bound from the time of this error
return to the actual data being available. The kernel driver keeps waiting
leading to soft-lockup on the host side.
Mitigate both these (known) cases by returning OPAL_BUSY so the host driver
knows to retry later.